Details, datasheet, quote on part number: RP108
PartRP108
CategoryDiscrete
DescriptionFast Silicon Rectifier
CompanyDiotec Electronics Corporation
DatasheetDownload RP108 datasheet
Cross ref.Similar parts: FR106, PR1006
  

 

Features, Applications
18020 Hobart Blvd., Unit B Gardena, CA 90248 U.S.A Tel.: (310) 767-1052 Fax: (310) 767-7958
FEATURES

Low forward voltage drop High current capacity BL Fast switching for high efficiency Color Band Denotes Cathode

Case: JEDEC DO-41, molded plastic (U/L Flammability Rating 94V-0) Terminals: Plated axial leads Soldering: Per MIL-STD 202 Method 208 guaranteed Polarity: Color band denotes cathode Mounting Position: Any Weight: 0.012 Ounces (0.34 Grams)

Ratings 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive loads, derate current by 20%.

Series Number Maximum DC Blocking Voltage Maximum RMS Voltage Maximum Peak Recurrent Reverse Voltage Average Forward Rectified Current 75 oC (Lead length = 0.375 in. (9.5 mm)) Peak Forward Surge Current ( 8.3 mSec single half sine wave superimposed on rated load) Maximum Forward Voltage at 1 Amp DC Maximum Reverse Recovery Time IR=1A, IRR=0.25A) Maximum Average DC Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range 100 C

Typical Thermal Resistance, Junction to Ambient (Note 1)

NOTES: (1) Thermal resistance junction to ambient with diode mounted on PC Board and lead lengths = 0.375 in. (9.5 mm) (2) Measured 1MHz & applied reverse voltage of 4 volts (3) 300nS available - consult factory

Single Phase, Half wave, 60 Hz Resistive and Inductive Loads
Ambient Temperature, oC FIGURE 1. FORWARD CURRENT DERATING CURVE
Number of Cycles 60 Hz FIGURE 2. MAXIMUM NON-REPETITIVE SURGE CURRENT
Instantaneous Forward Voltage (Volts) FIGURE 3. TYPICAL FORWARD CHARACTERISTIC
Reverse Voltage, (Volts) FIGURE 4. TYPICAL JUNCTION CAPACITANCE

NOTES: (1) Rise time = 7nS max., input impedance = 1 Megohm, pF (2) Rise time = 10nS max., source impedance = 50 ohms

FIGURE 5. REVERSE RECOVERY TEST SETUP AND TIME CHARACTERISTIC

 

Related products with the same datasheet
1N4935
1N4936
FR101
FR102
FR103
FR104
FR105
FR106
FR107
PR1001
PR1002
PR1003
Some Part number from the same manufacture Diotec Electronics Corporation
RP110 Fast Silicon Rectifier
RP1120
RP300
RP300-RP310
RP301
RP310
RP600
RP600-RP610
RP601
RP610
RPBDF101 Fast Switching si Bridge Rectifier
RPBPC301
RPBPC601
RS101
RS401L
RS601
RS8AT
S125 Surface Mount si Bridge Rectifier
S1A-S1M
S1NB05
S1NB05-S1NB100
 
0-C     D-L     M-R     S-Z