|
Details, datasheet, quote on part number:484GT
| |
Datasheet text preview:
EVERLIGHT ELECTRONICS CO.,LTD.
Device Number : CDLE-048-072 REV.: 1
3.0mm Very Wide Angle Type LED Lamps
PART NO. :
Features :
484GT
ECN:
Page:
1/4
Package Dimensions:
Choice of various viewing angles Available on tape and reel. Reliable and robust
Descriptions :
The series is specially designed for applications requiring higher brightness
The led lamps are available with different colors, intensities,
Applications : TV set Monitor Telephone Computer PART NO. 484GT Material
GaP
Notes : 1. All dimensions are in millimeters. 2. An epoxy meniscus may extend about 1.5mm(0.059'') down to the lead. 3. Tolerances unless Dimension ±0.25mm. Chip Emitted Color
Green
Lens Color
Green Trans
Office : 7C Building, Lian Hua Port Industrial District, Lian Hua Shan Bonded Pricessing Zone Pan Yu, Guang Zhou, China TEL. : (020)84860913,84860914 FAX : (020)84860600 http : //www.everlight.com
0
EVERLIGHT ELECTRONICS CO.,LTD.
Device Number : CDLE-048-072 REV.: 1
3.0mm Very Wide Angle Type LED Lamps PART NO. :
484GT
ECN:
Page:
2/4
Absolute Maximum Ratings at Ta = 25
Parameter Forward Current Operating Temperature Storage Temperature Soldering Temperature Power Dissipation Peak Forward Current(Duty 1/10 @ 1KHZ) Reverse Voltage Symbol IF Topr Tstg Tsol Pd IF(Peak) VR Rating 30 -40 to +85 -40 to +100 260 ± 5 100 160 5 Unit mA mW mA V
Electronic Optical Characteristics :
Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Symbol Iv 21/2 p d VF IR Min. 2.5 1.7 Typ. 4.0 150 565 570 30 2.1 Max. 2.4 10 Unit Condition
mcd IF= 10 mA deg IF= 20 mA nm nm nm V IF= 20 mA IF= 20 mA IF= 20 mA IF= 20 mA
A VR= 5 V
EVERLIGHT ELECTRONICS CO.,LTD.
Device Number : CDLE-048-072 REV.: 1
3.0mm Very Wide Angle Type LED Lamps PART NO. : 484GT
ECN : Page: 3/4
Typical Electro-Optical Characteristic Curves:
EVERLIGHT ELECTRONICS CO.,LTD.
Device Number : CDLE-048-072 REV.: 1
3.0mm Very Wide Angle Type LED Lamps PART NO. :
NO 1
484GT
ECN :
Page:
4/4
Reliability test items and conditions:
Item Solder Heat Test Conditions TEMP : 260 ± 5 H : +85 30min 5 min L : -55 30min H : +100 5min 10 sec L : -10 5min TEMP : 100 Test Hours/Cycle 5 SEC 76 PCS Ac/Re 0/1
2
Temperature Cycle
50 CYCLES 76 PCS
0/1
3
Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life
50 CYCLES 76 PCS
0/1
4
1000 HRS
76 PCS
0/1
5
TEMP : -55 TEMP : 25 IF = 20mA
1000 HRS
76 PCS
0/1
6
1000 HRS
76 PCS
0/1
7
High Temperature / High Humidity
85 / 85% RH
1000 HRS
76 PCS
0/1
|
|
