The is a high-speed 8-input digital multiplexer. It provides, in one package, the ability to select one line of data from up to eight sources. The AC/ACT151 can be used as a universal function generator to generate any logic function of four variables. Both true and complementary outputs are provided.
Features
Order Number 74ACT151SJ 74ACT151PC Package Number M16D N16E Package Description 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Body 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Body 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Device also available in Tape and Reel. Specify by appending suffix letter "X" to the ordering code.
Pin Names E Z Description Data Inputs Select Inputs Enable Input Data Output Inverted Data Output
The is a logic implementation of a single pole, 8-position switch with the switch position controlled by the state of three Select inputs, S1, S2. Both true and complementary outputs are provided. The Enable input (E) is active LOW. When it is not activated, the complementary output is HIGH and the true output is LOW regardless of all other inputs. The logic function provided at the output is: S1· S2) The AC/ACT151 provides the ability, in one package, to select from eight sources of data or control information. By proper manipulation of the inputs, the AC/ACT151 can provide any logic function of four variables and its complement.
H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial
Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays.
Supply Voltage (VCC) DC Input Diode Current (IIK) VI = VCC 0.5V DC Input Voltage (VI) DC Output Diode Current (IOK) VO = VCC 0.5V DC Output Voltage (VO) DC Output Source or Sink Current (IO) DC VCC or Ground Current per Output Pin (ICC or IGND) Storage Temperature (TSTG) Junction Temperature (TJ) PDIP -0.5V to VCC -0.5V to VCC to +7.0V
Supply Voltage (VCC) AC ACT Input Voltage (VI) Output Voltage (VO) Operating Temperature (TA) Minimum Input Edge Rate (V/t) AC Devices VIN from 70% of VCC 4.5V, 5.5V Minimum Input Edge Rate (V/t) ACT Devices VIN from to 2.0V VCC 5.5V 125 mV/ns
Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation of FACT circuits outside databook specifications.
Symbol VIH Parameter Minimum HIGH Level Input Voltage VIL Maximum LOW Level Input Voltage VOH Minimum HIGH Level Output Voltage VCC (V) VOL Maximum LOW Level Output Voltage IIN (Note 4) IOLD IOHD ICC (Note 4) Maximum Input Leakage Current Minimum Dynamic Output Current (Note 3) Maximum Quiescent Supply Current = +25°C Typ to +85°C Guaranteed Limits IN = VIL or VIH VIN = VIL or VIH µA V IOL 12 mA IOL 24 mA IOL 24 mA (Note I = VCC, GND V OLD = 1.65V Max V OHD = 3.85V Min VIN = VCC or GND V IOUT µA V IOH -12 mA IOH -24 mA IOH = -24 mA(Note 2) V IOUT µA V OUT 0.1V or VCC 0.1V V Units Conditions VOUT 0.1V or VCC - 0.1V
Note 2: All outputs loaded; thresholds on input associated with output under test. Note 3: Maximum test duration 2.0 ms, one output loaded at a time. Note 4: IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC.
|
