The is an expandable 8-bit comparator. It compares two words up to eight bits each and provides a LOW output when the two words match bit for bit. The expansion input IA=B also serves as an active LOW enable input.
s Compares two 8-bit words 6.5 ns typ s Expandable to any word length s 20-pin package
Order Number 74F521MSA 74F521PC Package Number MSA20 N20A Package Description 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 20-Lead Shrink Small Outline Package (SSOP), EIAJ TYPE II, 5.3mm Wide 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter "X" to the ordering code.
U.L. Pin Names A0A7 B0B7 IA=B OA=B Word A Inputs Word B Inputs Expansion or Enable Input (Active LOW) Identity Output (Active LOW) Description Input IIH/IIL HIGH/LOW Output IOH/IOL µA/-0.6 mA
H = HIGH Voltage Level L = LOW Voltage Level Note = B2, etc.
Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays.
Storage Temperature Ambient Temperature under Bias Junction Temperature under Bias VCC Pin Potential to Ground Pin Input Voltage (Note 3) Input Current (Note 3) Voltage Applied to Output in HIGH State (with VCC = 0V) Standard Output 3-STATE Output Current Applied to Output in LOW State (Max) twice the rated IOL (mA)
Note 2: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Note 3: Either voltage limit or current limit is sufficient to protect inputs.
Symbol VIH VIL VCD VOH VOL IIH IBVI ICEX VID IOD IIL IOS ICCH Parameter Input HIGH Voltage Input LOW Voltage Input Clamp Diode Voltage Output HIGH Voltage Output LOW Voltage Input HIGH Current Input HIGH Current Breakdown Test Output HIGH Leakage Current Input Leakage Test Output Leakage Circuit Current Input LOW Current Output Short-Circuit Current Power Supply Current VCC 5% VCC 10% VCC Min 0.8 -1.2 Typ Max Units µA mA Min Max 0.0 Max VCC Conditions Recognized as a HIGH Signal Recognized as a LOW Signal IIN -18 mA IOH -1 mA IOH -1 mA IOL 20 mA VIN = 2.7V VIN = 7.0V VOUT = VCC IID 1.9 µA All Other Pins Grounded VIOD 150 mV All Other Pins Grounded VIN = 0.5V VOUT VO = HIGH