|Category||Power Management => Regulators => Linear Regulators => LDO (Low Drop Out)|
|Description||0.5A Adjustable/fixed Low Dropout Linear Regulator|
|Datasheet||Download FAN1616A datasheet
|Cross ref.||Similar parts: MIC5239|
Low dropout voltage Load regulation: 0.05% typical Current limit On-chip thermal limiting Standard SOT-223 and TO-252 packages Three-terminal adjustable or fixed or 5V Specified from to +125°CDescription
The -2.5, -3.3 and -5 are low dropout three-terminal regulators with 0.5A output current capability. These devices have been optimized for applications where transient response and minimum dropout voltage are critical. The 5V version is designed also to be used in USB Hub and Motherboard applications. On-chip thermal limiting provides protection against any combination of overload and ambient temperature that would create excessive junction temperatures. Unlike PNP type regulators where 10% of the output current is wasted as quiescent current, the bias current of the FAN1616A flows into the load, increasing efficiency. The FAN1616A series regulators are available in the industry-standard SOT-223 and TO-252 power packages.Applications
USB Controlled Power Supply High efficiency linear regulators for Mixed Voltage Logic, ASIC, FPGA based systems Post regulators for switching supplies Battery chargers 1.8V, or adj linear regulators Motherboard clock supplies SDRAM Module suppliesTypical Applications
FAN1616AS (Variable) FAN1616AS-X (Fixed) Front View 3 Tab is OUT 1 IN OUT Tab is OUT ADJ/GND 1 4-Lead Plastic 3 FAN1616AD (Variable) FAN1616AD-X (Fixed) Front View
*With package soldered to 0.5 square inch copper area over backside ground plane or internal power plane, JA can vary from to >50°C/W. Other mounting techniques may provide better power dissipation than 30°C/W.
Parameter VIN (VINVOUT) * IOUT Operating Junction Temperature Range Storage Temperature Range Lead Temperature (Soldering, 10 sec.) -40 -65 Min. Max. 18 See Figure °C Unit VFigure 1. Absolute Maximum Safe Operating Area
Operating Conditions: VIN = 25°C unless otherwise specified. The denotes specifications which apply over the specified operating temperature range. Parameter Reference Voltage3 Conditions 1.5V (VIN - VOUT) 5.75V, 10mA IOUT 0.5A 10mA IOUT FAN1616A-1.8, 3.3V VIN FAN1616A-2.5, 4.0V VIN FAN1616A-3.3, 4.5V VIN FAN1616A-5, 6.2V VIN 12V (VOUT + 1.5V) VIN 12V, IOUT = 10mA (VIN VOUT) 2V, 10mA IOUT 0.5A VREF = 1%, IOUT = 0.5A Min. Typ. 1.250 Max. Units V
Adjust Pin Current 4 1.5V (VIN VOUT) 12V, 10mA IOUT 0.5A Minimum Load Current Quiescent Current Ripple Rejection Thermal Regulation Temperature Stability Long-Term Stability RMS Output Noise of VOUT) Thermal Resistance, Juncation to Case Thermal Shutdown TO-252 1.5V (VIN VOUT) 12V VIN = VOUT = 120Hz, COUT = 22µF Tantalum, (VIN VOUT) = 3V, IOUT 25°C, 30ms pulse
Notes: 1. See thermal regulation specifications for changes in output voltage due to heating effects. Load and line regulation are measured at a constant junction temperature by low duty cycle pulse testing. 2. Line and load regulation are guaranteed up to the maximum power dissipation. Power dissipation is determined by input/ output differential and the output current. Guaranteed maximum output power will not be available over the full input/output voltage range. 3. FAN1616A only. 4. Output current must be limited to meet the absolute maximum ratings of the part.
|Related products with the same datasheet|
|Some Part number from the same manufacture Fairchild Semiconductor|
|FAN1616A-3.3 0.5A Adjustable/fixed Low Dropout Linear Regulator|
|FAN1654 1A LDO, DDR Bus Termination Regulator|
|FAN1655 FAN1655 - 3A DDR Bus Termination Regulator|
|FAN1950 1.5A Low Voltage LDO|
|FAN2011 High-efficiency Step-down DC/DC Converter|
|FAN2500 Low-dropout Voltage Regulator|
|FAN2501 100 ma CMOS LDO Regulators|
|FAN2501x25 Low-dropout Voltage Regulator|
|FAN2503 150 ma CMOS LDO Regulators (preliminary)|
|FAN2503x25 Low-dropout Voltage Regulator|
KA7910 : 3-Terminal 1A Negative Voltage Regulator
NM27C240N100 : 4 Meg (256K X 16) High Performance CMOS EPROM Life-time Buy
RS1M : 1.0A Fast Recovery Rectifier
FAN3227TMX : Dual 2A High-speed, Low-side Gate Drivers
KSC2383OTA : Transistors Bipolar (BJT) NPN Epitaxial Sil Specifications: Manufacturer: Fairchild Semiconductor ; Product Category: Transistors Bipolar (BJT) ; RoHS: Details ; Transistor Polarity: NPN ; Collector- Emitter Voltage VCEO Max: 160 V ; Emitter- Base Voltage VEBO: 6 V ; Maximum DC Collector Current: 1 A ; DC Collector/Base Gain hfe Min: 60
BZX79C22_T50R : Diode - Zener - Single Discrete Semiconductor Product 50nA @ 15.4V 22V 500mW Through Hole; DIODE ZENER 22V 500MW DO-35 Specifications: Voltage - Zener (Nom) (Vz): 22V ; Power - Max: 500mW ; Impedance (Max) (Zzt): 55 Ohm ; Voltage - Forward (Vf) (Max) @ If: 1.5V @ 100mA ; Current - Reverse Leakage @ Vr: 50nA @ 15.4V ; Tolerance: ±5.67% ; Mounting Type: Through Hole ; Package / Case: DO-204AH, DO-35, Axial ; Packaging
FDP7042LS62Z : 50 A, 30 V, 0.009 ohm, N-CHANNEL, Si, POWER, MOSFET, TO-220AB Specifications: Polarity: N-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 30 volts ; rDS(on): 0.0090 ohms ; Package Type: TO-220, TO-220, 3 PIN ; Number of units in IC: 1
H11A1.3SDL : 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER Specifications: Output: Phototransistor ; Isolation Voltage: 5300 volts ; Collector Emitter Breakdown Voltage: 30 volts
ES2540-7R : 100 Watt DC-DC Converters. Wide input voltage ranges from 1or 2 isolated outputs kV AC I/O electric strengh test voltage Rugged electrical and mechanical design Fully isolated outputs Operating ambient temperature range 4071 °C with convection cooling Output 1 Uo nom Io nom [V DC] [A] Output 1 Uo nom Io nom [V DC] [A] Output 2 Uo nom Io nom [V DC] [A] Output 2 Uo nom Io nom [V DC] [A] Type.
HB01U05D05Z : 1 Watt Unregulated DC/DC Converters.
ISL6144 : High Voltage Oring MOSFET Controller The ISL6144 Oring MOSFET Controller And a Suitably Sized N-channel Power MOSFET(s) Increases Power Distribution Efficiency And Availability When Replacing a Power Oring Diode in High Current Applications..
LM350 : 3-Terminal 3A Positive Adjustable Voltage Regulator. Output adjustable between 1.2V and 33V Guaranteed 3A output current Internal thermal overload protection Load regulation (Typ: 0.1%) Line regulation (Typ: 0.015%/V) Internal short-circuit current limit Output transistor safe-area compensation The is an adjustable 3-terminal positive voltage regulator capable of supplying in excess 3.0 A over an output.
LNBP11SP : LNB Supply And Control Vregs, Double Output Voltage (13V And18V) 5%. LNBP SUPPLY AND CONTROL VOLTAGE REGULATOR (PARALLEL INTERFACE) COMPLETE INTERFACE FOR TWO LNBs REMOTE SUPPLY AND CONTROL LNB SELECTION AND STAND-BY FUNCTION BUILT-IN TONE OSCILLATOR FACTORY TRIMMED AT 22KHz FAST OSCILLATOR START-UP FACILITATES DiSEqCTM ENCODING TWO SUPPLY INPUTS FOR LOWEST DISSIPATION BYPASS FUNCTION FOR SLAVE OPERATION LNB SHORT CIRCUIT.
MC78T12 : 3-Terminal 3A Positive Voltage Regulator. Output Current in Excess of 3.0A Output Transistor Safe Operating Area Compensation Power Dissipation :25W Internal Short Circuit Current Limiting Internal Thermal Overload Protection Output Voltage Offered in 4% Tolerance No External Components Required Output Voltage of 5,12 and 15V This family of fixed voltage regulators are monolithic integrated.
S7123SF : Voltage Detector. As Control Circuit of Battery-Backed Memory As Measure Against Erroneous Operations at Power On-Off As Resetting Function for the CPU-Mounted Equipment PC, Printer, VTR, Fax, C-TV etc. As Measure Against System Runaway at Instantaneous Break of Power Supply etc. Current Consumption is Low (ICCL=300 Typ. ICCH=30 Typ.) Resetting Output Minimum Guarantee.
SI-3090N : Linear Regulator ic 3-Terminal. Compact full-mold package (equivalent to TO220) Output current: 1.0A Low dropout voltage: VDIF1V (at IO=1.0A) Built-in foldback overcurrent, overvoltage, thermal protection circuits For stabilization of the secondary stage of switching power supplies Electronic equipment Parameter DC Input Voltage DC Output Current Power Dissipation Junction Temperature.
SLVU2.8 : 10/100/1000 Ethernet Protection. Low-voltage Epd TVS Diode For Esd And Latch-up Protection / SOT-23.
DC1500 : 15 Watt Single and Dual Output DC-DC Converters Full 2: I input range Low profile 0.4" high Short Ckt & Overvoltage protected Fully regulated Low output ripple & noise High reliability.
ADP1713 : The ADP1712/ADP1713/ADP1714, available in a tiny, 5-lead TSOT package, are low dropout linear regulators that operate from 2.5 V to 5.5 V and provide up to 300 mA of output current. The low 170 mV dropout voltage at a 300 mA load improves efficiency and allows operation over a wide input voltage range. Using a novel scaling architecture, ground current.
SC4810E : High-Performance Current-Mode PWM Controller with Complementary Output, Programmable Delay.
AAT1217 : 600mA, 1.2MHz, Micropower Synchronous Step-Up Converter The AAT1217 a high efficiency, synchronous, fixed frequency, step-up converter designed for single-cell or dual-cell alkaline, NiMH, or NiCd battery-powered applications. The high 1.2MHz switching frequency and completely integrated control circuitry minimize the total solution footprint area while.
LT3688 : Dual 800mA Step-Down Switching Regulator With Power-On Reset And Watchdog Timer The LT3688 is an adjustable frequency (350kHz to 2.2MHz) dual monolithic step-down switching regulator with two power-on reset timers and a watchdog timer. The regulator operates off inputs up to 36V. Low ripple Burst Mode® operation maintains high efficiency at low output.
NCV47700 : 5 V To 20 V Adjustable Low Dropout Regulator With Adjustable Current Limit The NCV47700 is a 350 mA output current integrated low dropout regulator designed for use in harsh automotive environments. It includes wide operating temperature and input voltage ranges. The device is offered with adjustable voltage versions available in 6% output voltage accuracy.
CM2830GSIM23 : 300mA CMOS LDO The CM2830/CM2830A family is a positive voltage linear regulator developed utilizing CMOS technology featured low quiescent current (30 Ã‚µA typ.), low dropout voltage, and high output voltage accuracy. Built-in low on-resistance transistor provides low dropout voltage and large output current. A 2.2 Ã‚µF or greater can be used as an output.