Details, datasheet, quote on part number: KBPC10005P
PartKBPC10005P
CategoryPower Management => AC-DC Controllers/Converters => Bridge Rectifiers
Description10 Amp Silicon Bridge Rectifier
CompanyFuji Electric Corp. of America
DatasheetDownload KBPC10005P datasheet
  
Some Part number from the same manufacture Fuji Electric Corp. of America
KBU10005 10 Amp Silicon Bridge Rectifier
KBU4005 4 Amp Silicon Bridge Rectifier
KBU6005 6 Amp Silicon Bridge Rectifier
KBU8005 8 Amp Silicon Bridge Rectifier
KP823C03
KP823C04
KP823C09
KP883C02
KP923C2
KS823C03
KS823C04
KS823C09
KS826S04
KS883C02
KS923C2
KS926S2
MS808C06
MS906C2
MS906C3
PA806C03
PA847C04
Same catergory

ADP3186 : 5-Bit Programmable 2-/3-/4-Phase Synchronous Buck Controller The ADP3186 is a Highly Efficient Multiphase Synchronous Buck Switching Regulator Controller Optimized For Converting a 12 V Main Supply Into The Core Supply Voltage Required BY High Performance Amd Processors. It Uses an Internal 5-bit DAC to Read a Voltage Identification (VID) Code Directly.

BP5232-25A : . The BP5232-33A, BP5233-33A and BP5234-33A are / DC converters that use PWM system and VIF system. They contain control circuits, switching devices and coils, and operate by only connecting an I/O smoothing capacitor. With a high efficiency of power conversion, the modules are available in stand-alone SIP packages with no heat sink required. !Applications.

HT82P604B : DC-DC Converter. Operating voltage: 5V~12V Drives two N-Channel MOSFETs Simple single-loop control design - Voltage-mode PWM control Fast transient response - High-bandwidth error amplifier - Full to 100% duty ratio Excellent output voltage regulation - 1% over line voltage and temperature 5 bit digital-to-analog output voltage selection - Wide range - 0.1V binary.

L2605 : Fixed. Low Dropout Voltage Regulators. OUTPUT VOLTAGE 5, 8.5 AND 10 V OUTPUT CURRENT mA NO EXTERNAL COMPONENTS LOW DROP OUT VOLTAGE OVERVOLTAGE PROTECTION 100V) REVERSE VOLTAGE PROTECTION SHORT CIRCUIT PROTECTION CURRENT LIMITING THERMAL SHUTDOWN The L2600 series og three terminal positive regulators is specially designed to stabilize power supplies car instrumentation in vehicles with 12V battery.

SI-3120F : Linear Regulator IC, 5Terminal And Low-dropout Voltage. 5-Terminal, Multi-Function, Full-Mold, Low Dropout Voltage Dropper Type Compact full-mold package (equivalent to TO220) Output current: 1.0A Low dropout voltage: VDIF1V (at IO=1.0A) Variable output voltage (rise only) May be used for remote sensing (excluding SI-3025F) Output ON/OFF control terminal is compatible with LS-TTL. (It may be directly driven.

SPX4040 : Vref = 2.5 ;; Vin (MAX) = N/a ;; Operating Current = 160µA-15mA ;; Acc = 0.5%, 1% ;; Temp. (ppm/°C) = 100 ;; Ref = N/a ;; Package = 3 Pin TO-92 3 Pin SOT-23 8 Pin Soic.

TEA1103 : TEA1103; TEA1103T; TEA1103TS; Fast Charge Ics For Nicd And Nimh Batteries;; Package: SOT146-1 (DIP20), SOT163 (SO20), SOT339-1 (SSOP20).

TPS2044AD : USB Power Switches. ti TPS2044A, 0.7A, 2.7-5.5V Quad (2In/4Out) Hi-side MOSFET, Fault Report, Act-low Enable.

TPS61001DGSR : Switching DC/DC Converters, Integrated Switch. ti TPS61001, Low Input Voltage Boost Converter With Fixed 1.5V Output.

TPS70845PWP : ti TPS70845, Dual-output LDO With SVS And Independent Enables. TPS70858, TPS70802 DUAL-OUTPUT LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED SVS FOR SPLIT VOLTAGE SYSTEMS Applications Independent Enable Functions (See Part Number TPS707xx for Sequenced Outputs) Output Current Range mA on Regulator 1 and mA on Regulator 2 Voltage Options Are 3.3-V/1.5-V, 3.3-V/1.2-V, and Dual Adjustable Outputs Open Drain Power-On.

TPS75225 : . TPS75225Q, TPS75233Q WITH RESET TPS75425Q, TPS75433Q WITH POWER GOOD FAST-TRANSIENT-RESPONSE 2-A LOW-DROPOUT VOLTAGE REGULATORS 2-A Low-Dropout Voltage Regulator Available 2.5-V, 3.3-V Fixed Output and Adjustable Versions Open Drain Power-On Reset With 100-ms Delay (TPS752xxQ) Open Drain Power-Good (PG) Status Output (TPS754xxQ) Dropout Voltage Typically.

UC2841DW : Voltage Mode. ti UC2841, Programmable, Off-Line, PWM Controller. All Control, Driving, Monitoring, and Protection Functions Included Low-current, Off-line Start Circuit Voltage Feed Forward or Current Mode Control Guaranteed Duty Cycle Clamp PWM Latch for Single Pulse per Period Pulse-by-Pulse Current Limiting Plus Shutdown for Over-Current Fault No Start-up or Shutdown Transients Slow Turn-on Both Initially and After.

LM5005 : High Voltage 2.5 Amp Buck Regulator The LM5005 high voltage switching regulator all of the functions necessary to implement an efficient high voltage buck regulator using a minimum of external components. This easy to use regulator includes a 75V N-Channel buck switch with an output current capability of 2.5 Amps. The regulator control method is based.

MAX8840 : The MAX8840/MAX8841/MAX8842 ultra-low-noise, low-dropout (LDO) linear regulators are designed to deliver up to 150mA continuous output current. This regulator achieves a low 120mV dropout for 120mA load current. The MAX8840 uses an advanced architecture to achieve ultra-low-output voltage noise of 11VRMS and PSRR of 54dB at 100kHz. The MAX8841 does.

CM2830GEIM89 : 300mA CMOS LDO The CM2830/CM2830A family is a positive voltage linear regulator developed utilizing CMOS technology featured low quiescent current (30 ÂA typ.), low dropout voltage, and high output voltage accuracy. Built-in low on-resistance transistor provides low dropout voltage and large output current. A 2.2 ÂF or greater can be used as an output.

 
0-C     D-L     M-R     S-Z