|
Details, datasheet, quote on part number:JV-12-KT
| |
Datasheet text preview:
POWER RELAY
1 POLE--5 A (MEDIUM LOAD CONTROL)
JV SERIES
s FEATURES
q q q
q
q
q
q q
UL, CSA, VDE, SEMKO recognized UL class B (130°C) insulation Low profile and space saving --Height: 12.5 mm --Mounting space: 175 mm2 High sensitivity in small package --Operating power: 0.112 to 0.13 W --Nominal power: 0.2 to 0.3 W High insulation with reinforced insulation system (between coil and contacts) --Insulation distance: 8 mm --Dielectric strength: 5,000 VAC --Surge strength: 10,000 V Plastic materials --UL94 flame class V-0 --UL CTI level class 2 Plastic sealed type Cadmium free contacts
s ORDERING INFORMATION
[Example]
(a) (b) (c) (d) (e)
JV 12 (a) (*) (b)
SK (c) (d)
T (e)
JV : JV Series Refer to the COIL DATA CHART Nil : Single type S : High sensitivity type K : Plastic sealed type T : High density mounting type
Series Name Nominal Voltage Coil Type Enclosure Mounting
Note: Actual marking omits the hyphen (-) of (*)
1
JV SERIES
s SAFETY STANDARD AND FILE NUMBERS
UL 508, 873 (File No. E56140) C22.2 No. 14 (File No. LR35579) CSA certified to NRTL/C (class 3211-87) VDE 0435, 0631, 0700 (File No. 11039-4940-1012)
Nominal voltage 3 to 48 VDC Contact rating 1/8 HP 125 VAC/ 250 VAC 5 A 30 VDC/250 VAC, resistive 2 A 250 VAC inductive (PF=0.4) Pilot duty C 300
s SPECIFICATIONS
Item Contact Arrangement Material Type Resistance (initial) Rating (resistive) Maximum Carrying Current Maximum Switching Power Maximum Switching Voltage Maximum Switching Current Minimum Switching Coil Load*1 Standard Type JV-( ) 1 form A (SPST-NO) Silver alloy Single Maximum 70 m (at 1 A 6 VDC) 5 A 250 VAC or 5 A 30 VDC 5A 1,250 VA, 150 W 250 VAC, 150 VDC 5A 100 mA 5 VDC 0.3 W 0.13 W 0.2 W 0.113 W High Sensitivity Type JV-( ) S
Nominal Power (at 20°C) Operate Power (at 20°C) Operating Temperature
40°C to +70°C (no frost) (refer to the CHARACTERISTIC DATA) Maximum 8 ms Maximum 4 ms Minimum 1,000 M 750 VAC 1 minute 5,000 VAC 1 minute 10,000 V (1.2 x 50 µs (between coil and contacts) 5 × 10 6 operations minimum 1 × 10 5 operations minimum (contact rating) 10 to 55 Hz (double amplitude of 1.65 mm) 10 to 55 Hz (double amplitude of 5.0 mm) 100 m/s 2 (11 ±1 ms) 1,000 m/s 2 (6 ±1 ms) Approximately 4.3 g
Time Value
Operate (at nominal voltage) Release (at nominal voltage)
Insulation
Resistance (500 VDC) Dielectric between open contacts Strength between coil and contacts Surge Strength
Life
Mechanical Electrical
Other
Misoperation Vibration Resistance Endurance Misoperation Shock Resistance Endurance Weight
* Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels.
2
1
JV SERIES
s COIL DATA CHART
MODEL JV- 3-KT JV- 5-KT Standard Type JV- 6-KT JV- 9-KT JV-12-KT JV-18-KT JV-24-KT JV-48-KT High Sensitivity Type JV- 3S-KT JV- 5S-KT JV- 6S-KT JV- 9S-KT JV-12S-KT JV-18S-KT JV-24S-KT Nominal voltage 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 18 VDC 24 VDC 48 VDC 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 18 VDC 24 VDC Coil resistance (±10%) 30 83.3 120 270 480 1,080 1,920 7, 680 45 125 180 405 720 1,620 2,880 Must operate voltage +1.98 VDC +3.3 VDC +3.96 VDC +5.94 VDC +7.9 VDC +11.9 VDC +15.8 VDC +31.7 VDC +2.25 VDC +3.75 VDC +4.5 VDC +6.75 VDC +9.0 VDC +13.5 VDC +18.0 VDC Must release voltage +0.15 VDC +0.25 VDC +0.3 VDC +0.45 VDC +0.6 VDC +0.9 VDC +1.2 VDC +2.4 VDC +0.15 VDC +0.25 VDC +0.3 VDC +0.45 VDC +0.6 VDC +0.9 VDC +1.2 VDC Nominal power 300 mW 300 mW 300 mW 300 mW 300 mW 300 mW 300 mW 300 mW 200 mW 200 mW 200 mW 200 mW 200 mW 200 mW 200 mW
Note : All values in the table are measured at 20°C.
s CHARACTERISTIC DATA
s REFERENCE DATA
Life Curve
300 200
120 VAC
250 VAC 30VDC
AC120V cosø=0.7
Operation (x104)
100 50 30 20 10 5 3 2 1 0
30 VDC
AC250V cosø=0.7
120VAC cosø=0.4
250VAC cosø=0.4 30VDC
1 2 3 4 5
Contact Current (A)
3
|
|
