|Category||Discrete => Solid State relays|
|Company||Fujitsu Microelectronics, Inc.|
|Datasheet||Download NASL-9W-K datasheet
2 form C small size, surface mounting relay Slim type relay for high density mounting Conforms to Bellcore specification and FCC part 68 --Dielectric strength 1,500 VAC between coil and contacts --Surge strength 2,500 V between coil and contacts (at 10 µs surge wave) UL, CSA recognized High sensitivity and low consumption power --Operating power: 70 mW --Nominal power: 300 mW High reliability--bifurcated contacts DIL pitch terminals Plastic sealed type
Operation Function Number of Coil Nominal Voltage Contact Enclosure Packaging Orientation Packaging QuantityRefer to the COIL DATA CHART : Bifurcated type
: Standard type : Latching type : Plastic sealed type : Standard type : 500 pieces
: Single winding type : Double winding type
508, 1950 (File No. E45026) C22.2 No. 14 (File No. LR35579) Only UL/CSA approval markings are marked on the cover.
Item Contact Arrangement Material Style Resistance (initial) Rating (resistive) Maximum Carrying Current Maximum Switching Power Maximum Switching Voltage Standard Type NAS-( ) W-K 2 form C (DPDT) Gold overlay silver alloy Bifurcated Maximum 50 m (at A 6 VDC) A 125 VAC A 30 VDC 2A 62.5 AV, W 250 VAC, 220 VDC mA 10 mVDC Approximately 0.5 pF (between open contacts, adjacent contacts) Approximately 1.0 pF (between coil and contacts) 0.17 W Single Winding Latching Type Double Winding Latching Type NASL-( ) W-K NASL-D ( ) W-K
Release (at nominal voltage) Insulation Resistance (at 500 VDC) between open contacts Dielectric Strength between adjacent contacts between coil and contacts between open contacts
between coil and contacts Life Mechanical Electrical Other Misoperation Vibration Resistance Endurance Misoperation Shock Resistance Endurance Weight
× 105 ops. min. A 125 VAC), × 105 ops. min. A 30 VDC) 55 Hz (double amplitude of 3.3 mm) 55 Hz (double amplitude of 5.0 mm) (11 ±1 ms) 6 ±1 ms) Approximately 1.8 g
*1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels.
MODEL NAS-1.5 W-K NAS- 3 W-K NAS-4.5 W-K Standard Type NAS- 5 W-K NAS- 6 W-K NAS- 9 W-K NAS- 12 W-K NAS- 18 W-K NAS- 24 W-K NAS- 48 W-K *1 Nominal voltage 1.5 VDC 3 VDC 4.5 VDC 5 VDC 6 VDC 9 VDC 12 VDC 18 VDC 24 VDC 48 VDC Coil resistance Must operate voltage*1 +1.13 VDC +2.25 VDC +3.38 VDC +3.75 VDC +4.5 VDC +6.75 VDC +9.0 VDC +13.5 VDC +18.0 VDC +36.0 VDC Must release voltage*1 +0.15 VDC +0.3 VDC +0.45 VDC +0.5 VDC +0.6 VDC +0.9 VDC +1.2 VDC +1.8 VDC +2.4 VDC +4.8 VDC Nominal power 300 mW
Note: Specified values are subject to pulse wave voltage. All values in the table are measured at 20°C. MODEL Single Winding Latching Type Nominal voltage 1.5 VDC 3 VDC 5 VDC 6 VDC 9 VDC 4.5 VDCNASL- 3 W-K NASL- 5 W-K NASL- 6 W-K NASL- 9 W-K NASL- 12 W-K NASL- 18 W-K NASL- 24 W-K
NASL-D1.5 W-K NASL-D 3 W-K NASL-D4.5 W-K NASL-D 5 W-K NASL-D 6 W-K NASL-D 9 W-K NASL-D 12 W-K NASL-D 18 W-K NASL-D 24 W-K
Note: *1 Specified values are subject to pulse wave voltage. All values in the table are measured at 20°C.
|Related products with the same datasheet|
|Some Part number from the same manufacture Fujitsu Microelectronics, Inc.|
|NB90234 16-bit Proprietary Microcontroller|
|PCIPERIPHERALCORE RTL Synthesizable Module|