Details, datasheet, quote on part number: NASL-D12W-K
PartNASL-D12W-K
CategoryDiscrete => Solid State relays
Description
CompanyFujitsu Microelectronics, Inc.
DatasheetDownload NASL-D12W-K datasheet
Quote
Find where to buy
 
  

 

Features, Applications

2 form C small size, surface mounting relay Slim type relay for high density mounting Conforms to Bellcore specification and FCC part 68 --Dielectric strength 1,500 VAC between coil and contacts --Surge strength 2,500 V between coil and contacts (at 10 s surge wave) UL, CSA recognized High sensitivity and low consumption power --Operating power: 70 mW --Nominal power: 300 mW High reliability--bifurcated contacts DIL pitch terminals Plastic sealed type

Operation Function Number of Coil Nominal Voltage Contact Enclosure Packaging Orientation Packaging Quantity

Refer to the COIL DATA CHART : Bifurcated type
: Standard type : Latching type : Plastic sealed type : Standard type : 500 pieces
: Single winding type : Double winding type

508, 1950 (File No. E45026) C22.2 No. 14 (File No. LR35579) Only UL/CSA approval markings are marked on the cover.

Item Contact Arrangement Material Style Resistance (initial) Rating (resistive) Maximum Carrying Current Maximum Switching Power Maximum Switching Voltage Standard Type NAS-( ) W-K 2 form C (DPDT) Gold overlay silver alloy Bifurcated Maximum 50 m (at A 6 VDC) A 125 VAC A 30 VDC 2A 62.5 AV, W 250 VAC, 220 VDC mA 10 mVDC Approximately 0.5 pF (between open contacts, adjacent contacts) Approximately 1.0 pF (between coil and contacts) 0.17 W Single Winding Latching Type Double Winding Latching Type NASL-( ) W-K NASL-D ( ) W-K

Release (at nominal voltage) Insulation Resistance (at 500 VDC) between open contacts Dielectric Strength between adjacent contacts between coil and contacts between open contacts

between coil and contacts Life Mechanical Electrical Other Misoperation Vibration Resistance Endurance Misoperation Shock Resistance Endurance Weight

105 ops. min. A 125 VAC), 105 ops. min. A 30 VDC) 55 Hz (double amplitude of 3.3 mm) 55 Hz (double amplitude of 5.0 mm) (11 1 ms) 6 1 ms) Approximately 1.8 g

*1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels.

MODEL NAS-1.5 W-K NAS- 3 W-K NAS-4.5 W-K Standard Type NAS- 5 W-K NAS- 6 W-K NAS- 9 W-K NAS- 12 W-K NAS- 18 W-K NAS- 24 W-K NAS- 48 W-K *1 Nominal voltage 1.5 VDC 3 VDC 4.5 VDC 5 VDC 6 VDC 9 VDC 12 VDC 18 VDC 24 VDC 48 VDC Coil resistance Must operate voltage*1 +1.13 VDC +2.25 VDC +3.38 VDC +3.75 VDC +4.5 VDC +6.75 VDC +9.0 VDC +13.5 VDC +18.0 VDC +36.0 VDC Must release voltage*1 +0.15 VDC +0.3 VDC +0.45 VDC +0.5 VDC +0.6 VDC +0.9 VDC +1.2 VDC +1.8 VDC +2.4 VDC +4.8 VDC Nominal power 300 mW

Note: Specified values are subject to pulse wave voltage. All values in the table are measured at 20C. MODEL Single Winding Latching Type Nominal voltage 1.5 VDC 3 VDC 5 VDC 6 VDC 9 VDC 4.5 VDC

NASL- 3 W-K NASL- 5 W-K NASL- 6 W-K NASL- 9 W-K NASL- 12 W-K NASL- 18 W-K NASL- 24 W-K

NASL-D1.5 W-K NASL-D 3 W-K NASL-D4.5 W-K NASL-D 5 W-K NASL-D 6 W-K NASL-D 9 W-K NASL-D 12 W-K NASL-D 18 W-K NASL-D 24 W-K

Note: *1 Specified values are subject to pulse wave voltage. All values in the table are measured at 20C.


 

Related products with the same datasheet
NAS-1.5W-K
NAS-12W-K
NAS-18W-K
NAS-24W-K
NAS-3W-K
NAS-4.5W-K
NAS-48W-K
NAS-5W-K
NAS-6W-K
NAS-9W-K
NAS-W-K
NASL-1.5W-K
Some Part number from the same manufacture Fujitsu Microelectronics, Inc.
NASL-D18W-K
NB90234 16-bit Proprietary Microcontroller
NY-12W-K
PCIPERIPHERALCORE RTL Synthesizable Module
RA-1.5W-K
RA4-1.5W-K
RAL-1.5W-K
RY-12D-K

FAR-F5CM-881M50-B266-U : Saw Filter ( 700 to 1000 MHZ )

MB89557A : Proprietary F2MC-8L Family LCD Controller/driver Products

VR-6 :

FCN-607B030-G : 24V Drive Interface Board (parallel)

FTR-LYAA012Y : General Purpose / Industrial Relays 12 VDC 1 Form A Silver Alloy Contact Fujitsu's FTR-LY Series are slim-type, 1-pole, medium load control power relays featuring high-insulation in a small package. Features include aminimum insulation distance of 8mm, 4,000VAC dielectric strength, and6,000V surge strength. The FTR-LY Series also have UL94 flame class V-0 plastic

MB3793-42PNF-ER-6E1# : Pmic - Supervisor Integrated Circuit (ics) Simple Reset/Power-On Reset Cut Tape (CT) 1; IC PWR SUPP MON DUAL WD 8SOP Specifications: Output: CMOS Inverted ; Reset: Active Low ; Package / Case: 8-SOIC (0.154", 3.90mm Width) ; Packaging: Cut Tape (CT) ; Number of Voltages Monitored: 1 ; Reset Timeout: 80 ms Minimum ; Type: Simple Reset/Power-On Reset ; Voltage - Threshold: 4.2V ; Operating Temperature: -40C ~ 85C

FTR-K3LAB024W-PV : General Purpose Relays 250VAC/32A Wd contact gap 1.5mm Specifications: Manufacturer: Fujitsu ; Contact Form: 1 Form A (SPST-NO) ; Contact Current Rating: 32 A ; Coil Voltage: 24 V ; Coil Resistance: 640 Ohms ; Switching Voltage: 250 VAC ; Mounting Style: Through Hole ; Contact Material: Silver Tin Oxide ; Coil Type: 1 Pole ; Contact Termination: Solder

2MBI450VJ-120-50 : 675 A, 1200 V, N-CHANNEL IGBT Specifications: Polarity: N-Channel ; Package Type: MODULE-7 ; Number of units in IC: 2

 
0-C     D-L     M-R     S-Z