|
Details, datasheet, quote on part number:NY-4.5W-K
| |
Datasheet text preview:
POWER RELAY
1 POLE--5 A (CADMIUM FREE CONTACTS TYPE)
NY SERIES
s FEATURES
q
q
q q q q q q
q
Ultra slim type with 5 mm thickness --Good for high density mounting Low power consumption and high sensitivity --Nominal coil power: 120 mW --Operating power: 54 mW UL, CSA, VDE recognized Conforms to IEC 1010-1 and 1131-2 Wide operating range SIL pitch terminals Plastic sealed type Compatible with solid state I/O module type SN (see page 376) in size and pin (terminal) arrangement Environmentally friendly cadmium free contact type is available.
s ORDERING INFORMATION
[Example]
(a) (b) (c) (d) ( e)
NY P 12 (a) (b) (*) (c)
WK (d) (e)
NY: NY Series Nil : PC board mounting type P : Socket mounting type Refer to the COIL DATA CHART W : Bifurcated type K : Plastic sealed type
Series Name Terminal Classification Nominal Voltage Contact Enclosure
Note: Actual marking omits the hyphen (-) of (*)
s SAFETY STANDARD AND FILE NUMBERS
UL508 (File No. E56140) C22.2 No. 14 (File No. LR35579) VDE0435 (File No. 11039-4940-1013) Please note that UL/CSA ratings may differ from the standard ratings.
Nominal voltage 4.5 to 24 VDC Contact rating 1/8 HP 125 VAC/250 VAC 5 A 30 VDC/250 VAC resistive Pilot duty C 300
1
NY SERIES
s SPECIFICATIONS
Item Contact Arrangement Material Style Resistance (initial) Rating (resistive) Maximum Carrying Current Maximum Switching Power Maximum Switching Voltage Maximum Switching Current Minimum Switching Coil Load*1 1 form A (SPST-NO) Gold overlay silver alloy Bifurcated Maximum 30 m (at 1 A 6 VDC) 3 A 250 VAC or 3 A 30 VDC 5A 750 VA, 90 W 270 VAC, 125 VDC 5A 1mA 5 VDC 0.12W 0.054 W 40°C to +90°C (no frost) (refer to the CHARACTERISTIC DATA) Maximum 10 ms Maximum 5 ms Minimum 1,000 M 750 VAC 1 minute 3,000 VAC 1 minute 5,080 V (at 1.2 × 50 µs) 2 x 10 7 operations minimum 1.5 × 10 5 operations minimum (at 5A 30VDC) 1.5 × 10 5 operations minimum (at 3 A 120 VAC) 3 × 10 4 operations minimum (at 5 A 250 VAC) Misoperation Endurance Misoperation Endurance 10 to 55 Hz (double amplitude of 1.5 mm) 10 to 55 Hz (double amplitude of 5.0 mm) 100 m/s2 (11 ± 1 ms) 1,000 m/s2 (6 ± 1 ms) Approximately 3.5 g NY
Nominal Power (at 20°C) Operate Power (at 20°C) Operating Temperature
Time Value
Operate (at nominal voltage) Release (at nominal voltage)
Insulation
Resistance (at 500 VDC) between open contacts Dielectric Strength between coil and contacts Surge Strength
Life
Mechanical Electrical
Other
Vibration Resistance Shock Resistance Weight
*1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels.
2
NY SERIES
s COIL DATA CHART
MODEL NY- 4.5 W-K NYNYNY5 W-K 6 W-K 9 W-K Nominal voltage 4.5 VDC 5 VDC 6 VDC 9 VDC 12 VDC 18 VDC 24 VDC Coil resistance (±10%) 169 208 300 675 1,200 2,700 4,800 Must operate voltage 3 VDC Must release voltage 0.45 VDC 0.5 VDC 0.6 VDC 0.9 VDC 1.2 VDC 1.8 VDC 2.4 VDC Nominal power 120 mW 120 mW 120 mW 120 mW 120 mW 120 mW 120 mW
3.35 VDC 4 6 8 VDC VDC VDC
NY- 12 W-K NY- 18 W-K NY- 24 W-K
12.1 VDC 16.1 VDC
Note: All values in the table are measured at 20°C
s CHARACTERISTIC DATA
Maximum Switching Power
Switching Current (A)
5 3 2 1 0.5 0.3 0.2 0.1 10 20 30 50 100 200 300 500 AC Resistive Load DC Resistive Load
Switching Voltage (V)
3
|
|
