|Category||Passive Components => EMI/RFI Components => EMI/RFI Suppressors & Ferrites|
|Title||EMI/RFI Suppressors & Ferrites PCB Shield Enclosure|
|Datasheet||Download PS300EMC44 datasheet
|Product Category||EMI/RFI Suppressors & Ferrites|
|Product||Board Mount EMI Enclosures|
|Operating Temperature Range||- 20 C to + 110 C|
|Dimensions||50.8 mm W x 76.2 mm L x 10.1 mm H|
|Test Frequency||300 MHz|
|The Leading Source for EMI Shielding Reliable Board, Enclosure and Cable Solutions
Shielded enclosures for RF radiations from PCB components stop RF energy right at the source, eliminating re-radiation and interference with other nearby components as well as reducing the number of other shielding expenditures such as filters, gaskets and RF hardening of the equipment exterior structure. The addition of a frequency-tuned absorber membrane layer adds unprecedented performance, assimilating radiated energy without relying on repeated reflections from the interior surfaces of the shield, and without problems of harmonic resonance. Refer to sketches at right.Typical shielding approach allows reflected radiation to affect neighboring components.
The versatile shield design includes a solderable fence and tight-fitting cover assembly of copper alloy (C77000), a tough solder-compatible material which does not require plating nor has corrosion prone bare edges. The removable cover provides convenient access to circuitry; and is very cost-effective due to the use of universal multi-use manufacturing tooling.
RF absorber approach assimilates radiated frequencies and converts to imperceptible heat energy. Specific frequency-tuned absorber material is bonded toRF the Absorber lid interior. Shield A wide range of EMC and Microwave absorbers can be specified from 40 MHz to 116 GHz.
Each enclosure shield size can be combined with frequency-specific absorber material bonded to the cover interior for exacting remediation of otherwise errant frequency emanations - a selection of five EMC absorbers effective from 50 MHz to 1 GHz along with an extra wideband version effective from 40 MHz to 5 GHz; and, ten Microwave versions effective to 116 GHz.
PCB Shield effectiveness can be further RF Absorber Shield enhanced by adding RF absorber material under PCB (see pages 30-34).RF absorber membrane partially detached from lid for exhibit purpose only.
Frequency range Peak frequency choices Temperature range Flammability rating Adhesive: temperature tack shear Dimensions: standard maximumRF Absorber Shield RF Absorber Shield Adhesive Mount Option
50 MHz - 1 GHz or 800 MHz to 83°C ASTM D-3575 8.4 p.s.i. (stainless steel) ASTM D-3575 300+ hrs. @ 2 p.s.i. @ 22°C ASTM L x.011" max. L x.011" max x 0,28Adhesive Mount Option Adhesive Mount Option
@ 3.2GHz PEAK. This all-around universal wideband formula is available in a standard temperature type and a high temperature type (up to 200°C). Excellent performance from 5GHz (PS3200EMC series, opposite page).
Frequency range 40 MHz - 5 GHz Peak frequency 3.2 GHz Temperature range to 100°C and to 200°C (high temp) Flammability rating to 83°C ASTM D-3575 Adhesive: standard temp. to 312°F high temp. to 200°C ASTM D-3575 tack 8.4 p.s.i. (stainless steel standard) ASTM D-3575 8.3 p.s.i. (stainless steel high temperature) ASTM D-3575 shear 300+ hrs. @ 2 p.s.i. @ 22°C ASTM D-3575 Dimensions: standard L x.004" max. x 0,10 maximum L x.004" max x 0,10
The MA series is a high frequency microwave noise absorber in a range of formulations addressing to 116GHz radiations from electronic components.
2.0 MHz - 116.0 GHz to 83°C ASTM D-3575 8.4 p.s.i. (stainless steel) ASTM D-3575 300+ hrs. @ 2 p.s.i. @ 22°C ASTM L x.138" max x 3,5
THROUGH-HOLE OR ADHESIVE MOUNT TO 5GHz. The EMC series is available in three standard sizes; each can be combined with an absorber layer bonded to the inside of the lid in seven choices including the "3200" extra wideband absorber with effective characteristics from 40 MHz through 5 GHz, which is also available in a high temperature version. Refer to page 28 for absorber material characteristics, and page 29 for typical absorption rates by frequency. For recommended Mounting Hole Patterns, visit our web site at www.ferrishield.com under PCB Shield Enclosures and click on link PCB Mounting Hole Patterns. Adhesive mount option provides quick installation, easy retrofit.Internal Absorber Layer to C Board Absorber Dpin length
.040" (1,02mm) Through-hole mount recommended hole size.050" (1,27mm) Surface mount pins formed w/ 90° outward bend, add "SM" suffix to the part # Adhesive mount no holes required
PS3200EMC24HA* PSEMC24A (w/o absorber) PS3200EMC44HA* PSEMC44A (w/o absorber) PS3200EMC59HA* PSEMC59A (w/o absorber)*NOTE: "H" variations of these "PS3200EMC" types are the high temperature version
THROUGH-HOLE OR ADHESIVE MOUNT TO 116GHz. The microwave series is available in three standard sizes; each can be combined with an absorber membrane bonded to the lid. There are ten types of frequencysensitive absorber materials with effectiveness to 116 GHz. The multilayered absorbers of screened matrixes are tuned for discrete impedance matching to absorb microwaves from a wide range of angles. Refer to page 30 for absorber material characteristics, and to page 31 for typical absorption rates by frequency. For recommended Mounting Hole Patterns, visit our web site at www.ferrishield.com under PCB Shield Enclosures and click on link PCB Mounting Hole Patterns. Adhesive mount option provides quick installation, easy retrofit.
|Some Part number from the same manufacture FerriShield|
|PS300EMC59 Specifications: Manufacturer: FerriShield ; Product Category: EMI/RFI Suppressors & Ferrites ; RoHS: Details ; Product: Board Mount EMI Enclosures ; Operating Temperature Range: - 20 C to + 110 C ; Termination|
|SG060125R-48 Specifications: Manufacturer: FerriShield ; Product Category: EMI Gaskets & Grounding Pads ; RoHS: Details ; Length: 1220 mm ; Thickness: 1.2 mm ; Product Type: Gaskets ; Product: EMI/RFI Gaskets|
|SS25B2030 Specifications: Manufacturer: FerriShield ; Product Category: EMI/RFI Suppressors & Ferrites ; RoHS: Details ; Product: Clamp-On Ferrite Suppressors ; Impedance: 390 Ohms ; Termination Style: Axial|
|TGF150D Specifications: Manufacturer: FerriShield ; Product Category: Thermal Interface Products ; RoHS: Details ; Type: Thermal Gap Filler Pads ; Length: 300 mm ; Width: 200 mm ; Thickness: 1 mm ; Color:|
|PS100MA44 Specifications: Manufacturer: FerriShield ; Product Category: EMI/RFI Suppressors & Ferrites ; RoHS: Details ; Product: Board Mount EMI Enclosures ; Operating Temperature Range: - 20 C to + 110 C ; Termination|