Digchip : Database on electronics components
 
Member, Distributor  
Log In
Email:
Password:


Part: EI16LC05C

Category:
 Communication
   -> Network
     -> Ethernet/DS1/E1 (T1/E1)
       -> Line Interface

Description: Low Capacitance, Bidirectional, Eight Line Monolithic TVS Diode Network

Company: IMP, Inc.

Datasheet: Download EI16LC05C datasheet     File size : 74 kB

Request For quote: Find where to buy EI16LC05C



Datasheet text preview:
Semiconductor, Inc.

Ei 16LC05 thru Ei16LC15 Low Capacitance, Bidirectional, Eight Line Monolithic TVS Diode Network
Applications: · ESD & surge protection for power lines & I/O ports · TTL and MOS Bus Lines · RS-232, Rs-422 and RS-485 data lines · High speed logic · High speed data & video transmission

FEATURES:

· 500 watts Peak Pulse Power (tp = 8 x 20 µs) · ESD and Transient protection for data, signal, and
Vcc bus to IEC 1000-4-2, IEC 1000-4-4, IEC 1000-4-5

· Protects up to 8 bi-directional lines · Standoff voltages from 5 to 15 V · Low capacitance for high speed interfaces · Low clamping voltage · ESD protection >8KV (contact)
DESCRIPTION The Ei16LC series of monolithic
transient voltage suppressors are designed for applications where voltage transients, caused by electrostatic discharge (ESD) and other induced voltage surges, can permanently damage voltage sensitive components. These TVS diodes are characterized by their high surge capability, extremely fast response time and low on-resistance. The Ei16LC series consists of bi-directional diode arrays with low input capacitances and is specifically designed to protect multiple or single data lines with each channel being electrically independent for multiple I/O port protection. These monolithic diode array networks can be used to protect combinations of 8 unidirectional or bi-directional lines. They provide ESD and surge protection for sensitive power and I/O ports.

MECHANICAL CHARACTERISTICS:

· Available in 16 lead SOIC and PDIP · Solder temperature : 265°C for 10 seconds Schematic:
1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9

Part Numbers May Be Marked With "IMP" or "Ei."
MAXIMUM RATINGS
RATING Peak Pulse Power (tp = 8 x 20 µs) Operating Temperature SYMBOL Ppk Tj VALUE 500 -55 to +150 UNIT Watts °C

For

_____________________________________________________________________________________ 4703 S. Lakeshore Dr., Suite 2, Tempe, AZ, 85282 Ph: (602) 730-1000 Fax: (602) 838-4740 additional information, contact IMP, Inc. at 408.432.9100 or visit www.impweb.com Web Page: http://www.epicsemi.com

IMP, Inc. acquired Epic products on January 26, 2001. (see press release at http://www.impweb.com/PRESS/PR012601.htm)

Semiconductor, Inc.

Ei 16LC05 thru Ei16LC15 Low Capacitance, Bidirectional, Eight Line Monolithic TVS Diode Network
Tstg -55 to +150 °C

Storage Temperature

ELECTRICAL CHARACTERISTICS @ 25°C Reverse Min Max Stand-off Vbr Clamping Voltage @ 1mA Voltage @Ipp=1A VRW M BV(min) Vc Volts Volts Volts Ei16LC05C 5 6 9.8 Ei16LC08C 8 8.5 13.4 Ei16LC12C 12 13.3 19.0 Ei16LC15C 15 16.7 25.5

Max Clamping Voltage @Ipp = 10A Vc Volts 12.5 16.6 23.5 29.5

Leakage Current @ VRW M IR µA 400 10 2 2

Max. Cap. @0V, 1Mhz Cj pf 15 15 15 15

Note : Clamping voltage values are based upon an industry standard 8 x 20µs peak pulse current (Ipp) waveform.

For

IMP, Inc. acquired Epic products on January 26, 2001. (see press release at http://www.impweb.com/PRESS/PR012601.htm)

_____________________________________________________________________________________ 4703 S. Lakeshore Dr., Suite 2, Tempe, AZ, 85282 Ph: (602) 730-1000 Fax: (602) 838-4740 additional information, contact IMP, Inc. at 408.432.9100 or visit www.impweb.com Web Page: http://www.epicsemi.com




Others parts begin by ei
EI-1