Digchip : Database on electronics components
 
Member, Distributor  
Log In
Email:
Password:


Part: TCA355G

Category:

Description: -

Company: Infineon Technologies Corporation

Datasheet: Download TCA355G datasheet     File size : 50 kB

Request For quote: Find where to buy TCA355G



Datasheet text preview:
TCA 305 TCA 355
Proximity Switch
TCA 305 TCA 355
Bipolar IC
Features
q Lower open-loop current consumption; IS < 1 mA q Lower output saturation voltage q The temperature dependence of the switching
distance is lower and compensation of the resonant circuit TC (temperature coefficient) is easier
q The sensitivity is higher, so that larger switching
P-DSO-8-1
distances are possible and coils of a lower quality can be used
q The switching hysteresis remains constant as regards
temperature, supply voltage and switching distance
q The TCA 305 even functions without external
integrating capacitor. With an external capacitor (or with RC combination) good noise immunity can be achieved
q The outputs are temporarily short-circuit proof (approx.
10 s to 1 min depending on package)
q The outputs are disabled when VS < approx. 4.5 V and
P-DIP-14-1
are enabled when the oscillator stabilizes (from VS min = 5 V)
q Higher switching frequencies can be obtained q Miniature package
P-DSO-14-1 Type s TCA 305 A TCA 305 G TCA 355 G Ordering Code Q67000-A2291 Q67000-A2305 Q67000-A2444 Package P-DIP-14-1 P-DSO-14-1 (SMD) P-DSO-8-1 (SMD)
s Not for new design
Semiconductor Group
1
01.96
TCA 305 TCA 355
TCA 305 A
TCA 355 G
TCA 305 G
Pin Configurations (top view) The devices TCA 305 and TCA 355 contain all the functions necessary to design inductive proximity switches. By approaching a standard metal plate to the coil, the resonant circuit is damped and the outputs are switched. Operation Schematic: see TCA 205 The types TCA 305 and TCA 355 have been developed from the type TCA 205 and are outstanding for the following characteristics: Logic Functions Oscillator not damped damped Outputs Q H L L H
Semiconductor Group
2
TCA 305 TCA 355
Block Diagram Standard Turn-ON Delay Referred to TA = 25 °C
Semiconductor Group
3


Others parts begin by tc
TC-1   TC-2   TC-3   TC-4   TC-5   TC-6   TC-7   TC-8   TC-9   TC-10   TC-11   TC-12   TC-13   TC-14   TC-15   TC-16   TC-17   TC-18   TC-19   TC-20   TC-21   TC-22   TC-23   TC-24   TC-25   TC-26   TC-27   TC-28   TC-29   TC-30   TC-31   TC-32   TC-33   TC-34   TC-35   TC-36   TC-37   TC-38   TC-39   TC-40   TC-41   TC-42   TC-43   TC-44   TC-45   TC-46