Details, datasheet, quote on part number: IDT54FCT138CTLB
CategoryLogic => Decoder/Demultiplexers => CMOS/BiCMOS->FCT/FCT-T Family
DescriptionFast CMOS 1-of-8 Decoder With Enable
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT54FCT138CTLB datasheet
Cross ref.Similar parts: SN54AHCT138, SN54ALS138A, SN54AS138, SN54F138, SN54HCT138, SN54HCT238, SN54LS138
Find where to buy


Features, Applications

Std., A, and C grades Low input and output leakage 1A (max.) CMOS power levels True TTL input and output compatibility: VOH = 3.3V (typ.) VOL = 0.3V (typ.) High Drive outputs (-15mA IOH, 48mA IOL) Meets or exceeds JEDEC standard 18 specifications Military product compliant to MIL-STD-883, Class B and DESC listed (dual marked) Power off disable outputs permit "live insertion" Available in the following packages: Industrial: SOIC, QSOP Military: CERDIP, LCC

The a 1-of-8 decoder built using an advanced dual metal CMOS technology. The IDT54/74FCT138T accepts three binary weighted inputs A1, A2) and, when enabled, provides eight mutually exclusive active low outputs - O7). The IDT54/74FCT138T features three enable inputs, two active low (E1, E2) and one active high (E3). All outputs will be high unless E1 and E2 are low and E3 is high. This multiple enable function allows easy parallel expansion of the device 1-of-32 (5 lines to 32 lines) decoder with just four IDT54/74FCT138T devices and one inverter.

The IDT logo is a registered trademark of Integrated Device Technology, Inc.

Symbol Description Max to +120 Unit mA VTERM(2) Terminal Voltage with Respect to GND VTERM(3) Terminal Voltage with Respect to GND TSTG IOUT Storage Temperature DC Output Current

Pin Names - O7 Address Inputs Enable Inputs (Active LOW) Enable Input (Active HIGH) Outputs (Active LOW) Description

NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. No terminal voltage may exceed Vcc by =0.5V unless otherwise noted. 2. Inputs and Vcc terminals only. 3. Output and I/O terminals only.

Symbol CIN COUT Parameter(1) Input Capacitance Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 6 8 Max. 10 12 Unit pF

NOTE: 1. This parameter is measured at characterization but not tested.
NOTE: H = HIGH Voltage Level X = Don't Care L = LOW Voltage Level

Following Conditions Apply Unless Otherwise Specified: Industrial: to +85C, VCC 5.0V 10%; Military: to +125C, VCC 5.0V 10%

Symbol VIH VIL IIH IIL II VIK IOS VOH Parameter Input HIGH Level Input LOW Level Input HIGH Current(4) Input LOW Current(4) Input HIGH Current(4) Clamp Diode Voltage Short Circuit Current Output HIGH Voltage Test Conditions(1) Guaranteed Logic HIGH Level Guaranteed Logic LOW Level VCC = Max. VCC = Max. VCC = Max., VI = VCC (Max.) VCC = Min., IIN = 18mA VCC = Max., VO = VCC = Min VIN = VIH or VIL GND(3) IOH = 6mA MIL IOH = 8mA IND IOH = 12mA MIL IOH = 15mA IND IOL = 32mA MIL IOL = 48mA IND VCC = Max. VIN = GND or VCC = 0.5V Min. Typ.(2) Max. mA V Unit V A

Output LOW Voltage Input Hysteresis Quiescent Power Supply Current

NOTES: 1. For conditions shown as Min. or Max., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC 5.0V, +25C ambient. 3. Not more than one output should be tested at one time. Duration of the test should not exceed one second. 4. The test limit for this parameter = 55C.


Related products with the same datasheet
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT54FCT138CTP Fast CMOS 1-of-8 Decoder With Enable
IDT54FCT139AD Fast CMOS Dual 1-of-8 Decoder With Enable

IDT49FCT806APYB : CMOS/BiCMOS->FCT/FCT-T Family Fast CMOS Buffer Clock/driver

IDT54FCT841BPB : High-performance CMOS Bus Interface Latches

IDT7204L35D : CMOS Asynchronous Fifo With Retransmit 1k X 9, 2k X 9, 4k X 9

IDT72235LB50PF : CMOS Syncfifoo 256 X 18, 512 X 18, 1024 X 18, 2048 X 18 And 4096 X 18

IDT7142LA25FG : HIGH SPEED 2K X 8 DUAL PORT STATIC RAM The IDT7132/IDT7142 are high-speed 2K x 8 Dual-Port Static RAMs. The IDT7132 is designed to be used as a stand-alone 8-bit Dual-Port RAM or as a “MASTER? Dual-Port RAM together with the IDT7142 “SLAVE? Dual-Port in 16-bit-or-more word width systems.

ICS84021AYLF : Clock/timing - Clock Generators, Plls, Frequency Synthesizer Integrated Circuit (ics) Frequency Synthesizer Tray 3.135 V ~ 3.465 V; IC SYNTHESIZER HIGH FREQ 32-LQFP Specifications: Type: Frequency Synthesizer ; PLL: Yes with Bypass ; Input: LVCMOS, LVTTL, Crystal ; Output: LVCMOS, LVTTL ; Frequency - Max: 260MHz ; Number of Circuits: 1 ; Ratio - Input Output: 1 2 ; Differential - Input Output: No/No ; Divider/Multiplier: Yes/No ; Voltage - Supply: 3.135 V ~ 3.4

IDT72201L20L8 : 256 X 8 OTHER FIFO, 6.5 ns, UUC28 Specifications: Memory Category: FIFO ; Density: 2 kbits ; Number of Words: 256 k ; Bits per Word: 8 bits ; Package Type: DIE ; Pins: 28 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 6.5 ns ; Cycle Time: 10 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

5962-89550012A : OTHER FIFO, 20 ns, CDIP28 Specifications: Memory Category: FIFO ; Density: 9 kbits ; Number of Words: 1 k ; Bits per Word: 9 bits ; Package Type: DIP, CERAMIC, DIP-28 ; Pins: 28 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 20 ns ; Cycle Time: 30 ns ; Operating Temperature: -55 to 125 C (-67 to 257 F)

74FCT388915TBPYG : FCT SERIES, PLL BASED CLOCK DRIVER, 7 TRUE OUTPUT(S), 1 INVERTED OUTPUT(S), PQCC28 Specifications: Device Type: Clock Driver ; Bus Interface: CMOS ; Package Type: Surface Mount, GREEN, PLASTIC, LCC-28 ; Supply Voltage: 3 to 3.6 volts ; Skew: 800 ps ; Frequency: 100 MHz ; Operating Temperature: 0.0 to 70 C (32 to 158 F) ; Features / Standards: RoHS, Lead-Free

0-C     D-L     M-R     S-Z