Details, datasheet, quote on part number: IDT54FCT162240TEB
PartIDT54FCT162240TEB
CategoryLogic => Line Driver/Receivers => CMOS/BiCMOS->FCT/FCT-T Family
TitleCMOS/BiCMOS->FCT/FCT-T Family
DescriptionFast CMOS 16-bit Buffer/line Driver
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT54FCT162240TEB datasheet
Cross ref.Similar parts: SN54ABT16240A
Quote
Find where to buy
 
  

 

Features, Applications

MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tSK(o) (Output Skew) < 250ps Low input and output leakage 1 A (max.) ESD > 2000V per MIL-STD-883, Method > 200V using machine model = 0) VCC 5V 10% Balanced Output Drivers: 24mA (industrial) 16mA (military) Reduced system switching noise Typical VOLP (Output Ground Bounce) 0.6V at VCC = 25C Available in the following packages: Industrial: SSOP, TSSOP, TVSOP Military: CERPACK

The FCT162240T 16-bit buffer/line driver is built using advanced dual metal CMOS technology. These high-speed, low-power devices offer bus/ backplane interface capability with improved packing density. The flowthrough organization of signal pins simplifies layout. The three-state controls are designed to operate these devices in a Quad-Nibble, Dual-Byte or single 16-bit word mode. All inputs are designed with hysteresis for improved noise margin. The FCT162240T have balanced output drive with current limiting resistors. This offers low ground bounce, minimal undershoot, and controlled output fall times reducing the need for external series terminating resistors. The is a plug-in replacement for FCT16240T and 54/74ABT16240 for on-board interface applications.

Description Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Storage Temperature DC Output Current

NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. All device terminals except FCT162XXX Output and I/O terminals. 3. Output and I/O terminals for FCT162XXX.

Symbol CIN COUT Parameter(1) Input Capacitance Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 3.5 Max. 6 8 Unit pF

NOTE: 1. This parameter is measured at characterization but not tested.

Pin Names xOE xAx xYx Description 3State Output Enable Inputs (Active LOW) Data Inputs 3-State Outputs

NOTE: H = HIGH Voltage Level X = Don't Care L = LOW Voltage Level Z = High-Impedance

Following Conditions Apply Unless Otherwise Specified: Industrial: to +85C, VCC 5.0V 10%; Military: to +125C, VCC 5.0V 10%

Symbol VIH VIL IIH IIL IOZH IOZL VIK IOS VH ICCL ICCH ICCZ Parameter Input HIGH Level Input LOW Level Input HIGH Current (Input pins)(5) Input HIGH Current (I/O pins)(5) Input LOW Current (Input pins)(5) Input LOW Current (I/O pins)(5) High Impedance Output Current (3-State Output pins)(5) Clamp Diode Voltage Short Circuit Current Input Hysteresis Quiescent Power Supply Current VCC = Max. VIN = GND or VCC = Min., IIN = 18mA VCC = Max., = GND(3) VCC = Max. VI = GND Test Conditions(1) Guaranteed Logic HIGH Level Guaranteed Logic LOW Level VCC = Max. VI = VCC Min. 80 Typ.(2) Max. mV A Unit V A

Symbol IODL IODH VOH VOL Parameter Output LOW Current Output HIGH Current Output HIGH Voltage Output LOW Voltage Test Conditions(1) VCC = 5V, VIN = VIH or VIL, = 1.5V(3) VCC = 5V, VIN = VIH or VIL, = 1.5V(3) VCC = Min. VIN = VIH or VIL VCC = Min. VIN = VIH or VIL IOH = 16mA MIL IOH = 24mA IND. IOL = 16mA MIL IOL = 24mA IND.

NOTES: 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC 5.0V, +25C ambient. 3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. 4. Duration of the condition can not exceed one second. 5. The test limit for this parameter = -55C.


 

Related products with the same datasheet
IDT54FCT162240ATE
IDT54FCT162240ATEB
IDT54FCT162240ATPA
IDT54FCT162240ATPAB
IDT54FCT162240ATPF
IDT54FCT162240ATPFB
IDT54FCT162240ATPV
IDT54FCT162240ATPVB
IDT54FCT162240CT
IDT54FCT162240CTE
IDT54FCT162240CTEB
IDT54FCT162240CTPA
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT54FCT162240TPA Fast CMOS 16-bit Buffer/line Driver
IDT54FCT162244AT
IDT54FCT162245 Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT162245AT Fast CMOS 16-bit Bi-directional Transceiver
IDT54FCT162245ET Fast CMOS 16-bit Bidirectional Transceivers
IDT54FCT162245ETE Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT162245T Fast CMOS 16-bit Bi-directional Transceiver
IDT54FCT162260 Fast CMOS 12-bit Tri-port Bus Exchanger
IDT54FCT162260AT
IDT54FCT162260ET

IDT7143SA55FB : Multi-Ports 2K X 16 Dual-port RAM

ICS8302AMLF : Clock/timing - Clock Buffers, Driver Integrated Circuit (ics) Fanout Buffer (Distribution) Tube 3.135 V ~ 3.465 V; IC CLK FANOUT BUFFER 1:2 8SOIC Specifications: Type: Fanout Buffer (Distribution) ; Frequency - Max: 200MHz ; Input: LVCMOS, LVTTL ; Output: LVCMOS, LVTTL ; Voltage - Supply: 3.135 V ~ 3.465 V ; Package / Case: 8-SOIC (0.154", 3.90mm Width) ; Packaging: Tube ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ICS552R-01CI : OTHER CLOCK GENERATOR, PDSO20 Specifications: Device Type: Clock Generator ; Package Type: Surface Mount, SSOP, 0.150 INCH, SSOP-20 ; Supply Voltage: 3 to 5.5 volts ; Frequency: 27 MHz ; Operating Temperature: 0.0 to 70 C (32 to 158 F)

IDT70V08S20PFG : 64K X 8 DUAL-PORT SRAM, 15 ns, PQFP100 Specifications: Memory Category: SRAM Chip ; Density: 524 kbits ; Number of Words: 64 k ; Bits per Word: 8 bits ; Package Type: TQFP, 14 X 14 MM, 1.40 MM HEIGHT, TQFP-100 ; Pins: 100 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 15 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT71342SA45PFG8 : 4K X 8 MULTI-PORT SRAM, 35 ns, PQCC52 Specifications: Memory Category: SRAM Chip ; Density: 33 kbits ; Number of Words: 4 k ; Bits per Word: 8 bits ; Package Type: PLASTIC, LCC-52 ; Pins: 52 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 35 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT72401L45SO8 : 64 X 4 OTHER FIFO, 55 ns, CDIP16 Specifications: Memory Category: FIFO ; Density: 0 kbits ; Number of Words: 64 k ; Bits per Word: 4 bits ; Package Type: 0.300 INCH, CERDIP-16 ; Pins: 16 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 55 ns ; Cycle Time: 100 ns ; Operating Temperature: -55 to 125 C (-67 to 257 F)

IDT72V831L10TF : 2K X 9 BI-DIRECTIONAL FIFO, 6.5 ns, PQFP64 Specifications: Memory Category: FIFO ; Density: 18 kbits ; Number of Words: 2 k ; Bits per Word: 9 bits ; Package Type: TQFP, PLASTIC, TQFP-64 ; Pins: 64 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 6.5 ns ; Cycle Time: 10 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT74LVC08APY8 : LVC/LCX/Z SERIES, HEX 1-INPUT INVERT GATE, PDSO14 Specifications: Gate Type: NOT ; Supply Voltage: 3.3V ; Output Type: Open Drain ; Logic Family: CMOS ; Inputs: 1 ; Propagation Delay: 3.9 ns ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Pin Count: 14 ; IC Package Type: SOIC, Other, 1.27 MM PITCH, SOIC-14

SF0070BA03056S : 1 FUNCTIONS, 70 MHz, SAW FILTER Specifications: Filter Design: Saw Filter ; Insertion Loss: 22 dB ; Package Type: Surface Mount ; Operating Temperature: 32 to 158 F (273 to 343 K)

2308B-3PG8 : IC,1:8 OUTPUT,SOP,16PIN,PLASTIC Specifications: Device Type: Clock Driver

71V2556S133BGGI8 : 128K X 36 ZBT SRAM, 5 ns, PBGA119 Specifications: Memory Category: SRAM Chip ; Density: 4719 kbits ; Number of Words: 128 k ; Bits per Word: 36 bits ; Package Type: BGA, GREEN, BGA-119 ; Pins: 119 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 5 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

 
0-C     D-L     M-R     S-Z