Details, datasheet, quote on part number: IDT54FCT162245
CategoryLogic => Transceivers => 16/32-Bit Bus Transceiver->CMOS/BiCMOS->FCT/FCT-T
Title16/32-Bit Bus Transceiver->CMOS/BiCMOS->FCT/FCT-T
DescriptionFast CMOS 16-bit Bidirectional Transceiver
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT54FCT162245 datasheet
Find where to buy


Features, Applications

MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tSK(o) (Output Skew) < 250ps Low input and output leakage 1µ A (max.) ESD > 2000V per MIL-STD-883, Method > 200V using machine model 0) 25 mil pitch SSOP, 19.6 mil pitch TSSOP, 15.7 mil pitch TVSOP and 25 mil pitch CERPACK packages Extended commercial range to +85°C Balanced Output Drivers: ±24mA (commercial) ±16mA (military) Reduced system switching noise Typical VOLP (Output Ground Bounce) 0.6V at VCC = 25°C

The FCT162245T 16-bit transceiver is built using advanced dual metal CMOS technology. These high-speed, low-power transceivers are ideal for synchronous communication between two busses (A and B). The Direction and Output Enable controls operate these devices as either two independent 8-bit transceivers or one 16-bit transceiver. The direction control pin (xDIR) controls the direction of data flow. The output enable pin (xOE) overrides the direction control and disables both ports. All inputs are designed with hysteresis for improved noise margin. The FCT162245T has balanced output drive with current limiting resistors. This offers low ground bounce, minimal undershoot, and controlled output fall times­ reducing the need for external series terminating resistors. The FCT162245T are plug-in replacements for the FCT16245T and ABT16245 for on-board interface applications.

Description Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Storage Temperature DC Output Current

NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. All terminals except exceptFCT162XXXT FCT162XXXT and FCT166XXXT (APort) Output and I/O terminals. All device terminals terminals.for FCT162XXXT. 3. Output and I/O terminals 3. Output and I/O terminals for FCT162XXXT and FCT166XXXT (A-Port).

Symbol CIN COUT Parameter(1) Input Capacitance Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 3.5 Max. 6 8 Unit pF

NOTE: 1. This parameter is measured at characterization but not tested.

Pin Names xOE xDIR xAx xBx Description Output Enable Input (Active LOW) Direction Control Input Side A Inputs or 3-State Outputs Side B Inputs or 3-State Outputs

Inputs xOE L H xDIR H X Outputs Bus B Data to Bus A Bus A Data to Bus B High Z State
NOTE: H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care Z = High-Impedance

Following Conditions Apply Unless Otherwise Specified: Commercial: to +85°C, VCC 5.0V ±10%; Military: to +125°C, VCC 5.0V ±10%

Symbol VIH VIL IIH IIL IOZH IOZL VIK IOS VH ICCL ICCH ICCZ Parameter Input HIGH Level Input LOW Level Input HIGH Current (Input pins)(5) Input HIGH Current (I/O pins)(5) Input LOW Current (Input pins)(5) Input LOW Current (I/O pins)(5) High Impedance Output Current (3-State Output pins)(5) Clamp Diode Voltage Short Circuit Current Input Hysteresis Quiescent Power Supply Current VCC = Max. VIN = GND or VCC = Min., IIN = ­18mA VCC = Max., = GND(3) VCC = Max. VI = GND Test Conditions(1) Guaranteed Logic HIGH Level Guaranteed Logic LOW Level VCC = Max. VI = VCC Min. ­80 Typ.(2) Max. mV µA Unit V µA

Symbol IODL IODH VOH VOL Parameter Output LOW Current Output HIGH Current Output HIGH Voltage Output LOW Voltage Test Conditions(1) VCC = 5V, VIN = VIH or VIL, = 1.5V(3) VCC = 5V, VIN = VIH or VIL, = 1.5V(3) VCC = Min. VIN = VIH or VIL VCC = Min. VIN = VIH or VIL IOH = ­16mA MIL IOH = ­24mA COM'L IOL = 16mA MIL IOL = 24mA COM'L

NOTES: 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC 5.0V, +25°C ambient. 3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. 4. Duration of the condition can not exceed one second. 5. The test limit for this parameter = -55°C.


Related products with the same datasheet
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT54FCT162245AT Fast CMOS 16-bit Bi-directional Transceiver
IDT54FCT162245ET Fast CMOS 16-bit Bidirectional Transceivers
IDT54FCT162245ETE Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT162245T Fast CMOS 16-bit Bi-directional Transceiver
IDT54FCT162260 Fast CMOS 12-bit Tri-port Bus Exchanger
IDT54FCT162344 Fast CMOS Address/clock Driver
IDT54FCT162373 Fast CMOS 16-bit Transparent Latch

IDT72831L10PF : 2K X 9 Dualsync Fifo, 5.0V

IDT74FCT640TSO : Fast CMOS Octal Bidirectional Transceivers

ICS843252AGLF : Clock/timing - Clock Generators, Plls, Frequency Synthesizer Integrated Circuit (ics) Clock/Frequency Synthesizer, Clock Generator, Multiplexer Tube 3.135 V ~ 3.465 V; IC CLK GENERATOR LVPECL 16-TSSOP Specifications: Type: Clock/Frequency Synthesizer, Clock Generator, Multiplexer ; PLL: Yes with Bypass ; Input: LVCMOS, LVTTL, Crystal ; Output: LVPECL ; Frequency - Max: 187.5MHz ; Number of Circuits: 1 ; Ratio - Input Output: 2 2 ; Differential - Input Output: No/Yes ; Divider/Multiplier: Yes/No ;

IDT7200S80SO8 : 256 X 9 OTHER FIFO, 120 ns, PQCC32 Specifications: Memory Category: FIFO ; Density: 2 kbits ; Number of Words: 256 k ; Bits per Word: 9 bits ; Package Type: PLASTIC, LCC-32 ; Pins: 32 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 120 ns ; Cycle Time: 140 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT72V2103L7-5BC : 256K X 9 OTHER FIFO, 6.5 ns, PQFP64 Specifications: Memory Category: FIFO ; Density: 2359 kbits ; Number of Words: 256 k ; Bits per Word: 9 bits ; Package Type: TQFP, PLASTIC, TQFP-64 ; Pins: 64 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 6.5 ns ; Cycle Time: 10 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT72V831L10PF9 : 2K X 9 BI-DIRECTIONAL FIFO, 6.5 ns, PQFP64 Specifications: Memory Category: FIFO ; Density: 18 kbits ; Number of Words: 2 k ; Bits per Word: 9 bits ; Package Type: TQFP, PLASTIC, TQFP-64 ; Pins: 64 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 6.5 ns ; Cycle Time: 10 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT74ALVCH162245PAG : ALVC/VCX/A SERIES, HEX 1-INPUT INVERT GATE, PDSO14 Specifications: Gate Type: NOT ; Supply Voltage: 3.3V ; Logic Family: CMOS ; Inputs: 1 ; Propagation Delay: 3.7 ns ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Pin Count: 14 ; IC Package Type: SOIC, Other, SOIC-14

7134LA55JG : 4K X 8 DUAL-PORT SRAM, 55 ns, CDIP48 Specifications: Memory Category: SRAM Chip ; Density: 33 kbits ; Number of Words: 4 k ; Bits per Word: 8 bits ; Package Type: DIP, SIDE BRAZED, CERAMIC, DIP-48 ; Pins: 48 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 55 ns ; Operating Temperature: -55 to 125 C (-67 to 257 F)

Same catergory

AVGDV4002BN : Dual 4 Input NOR GATE, Plastic Dip, Through Hole.

CD54HCT257 : Multiplexers->CMOS/BiCMOS->HC/HCT Family. High Speed CMOS Logic Quad 2-input Multiplexer With Three-state Non-inverting Outputs.

DM54173J : Tri-state Quad Registers. These four-bit registers contain D-type flip-flops with totempole TRI-STATE outputs capable of driving highly capacitive or low-impedance loads The high-impedance state and increased high-logic-level drive provide these flip-flops with the capability of driving the bus lines in a bus-organized system without need for interface or pull-up components.

DM54LS74A : Bipolar->TTL Family. Dual Positive-edge-triggered D Flip-flop With Preset, Clear And Complementary Outputs.

MC100E241 : Bipolar->ECL 100 Family. 8-bit Scannable Register. The an 8-bit shiftable register. Unlike a standard universal shift register such as the E141, the E241 internal data feedback organized so that the SHIFT control overrides the HOLD/LOAD control. This enables the normal operations of HOLD and LOAD to be toggled with a single control line without the need for external gating. It also enables switching.

MC10EP16T : Line Receivers. The is a world­class differential receiver/driver. The device is functionally equivalent to the EP16 with internal termination resistors. 50 W resistor is connected from the D input to the VT pin and from the D input to the VT pin. Tie the VT and VT pins to VTT supply (VCC 2 V) for parallel termination or connect VT and VT pins for 100 W input series.

NC7SZ38 : CMOS/BiCMOS->4000 Family. Tinylogic Uhs 2-Input NAND Gate (Open Drain Output).

PI74ALVCH16825 : CMOS/BiCMOS->LVC/ALVC/VCX Family->Low Voltage. 18-Bit Buffer/line Driver.

SL74HC132 : Quad 2-input NAND Gate. The SL74HC132 is identical in pinout to the LS/ALS132. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. The SL74HC132 can be used to enhance noise immunity or to square up slowly changing waveforms. Outputs Directly Interface to CMOS, NMOS, and TTL Operating Voltage Range:.

SN54ABT245A : Bus Oriented Circuits. Octal Bus Transceivers With 3-state Outputs. Typical VOLP (Output Ground Bounce) V at VCC = 25°C Ioff and Power-Up 3-State Support Hot Insertion High-Drive Outputs (­32-mA IOH, 64-mA IOL) Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD 17 ESD Protection Exceeds JESD ­ 2000-V Human-Body Model ­ 200-V Machine Model (A115-A) These octal bus transceivers are designed for asynchronous communication.

SN54HC08FK : Quadruple 2-input Positive-and Gates. Package Options Include Plastic Small-Outline (D), Thin Shrink Small-Outline (PW), and Ceramic Flat (W) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs These devices contain four independent 2-input AND gates. They perform the Boolean function B in positive logic. The SN54HC08 is characterized for operation.

SN54S151 : Multiplexers.

SN74AHC00QDRQ1 : ti SN74AHC00Q-Q1, Automotive Catalog Quadruple 2-Input Positive-nand Gates.

SN74CBTLV3857 : Bus Oriented Circuits. Low-voltage 10-bit Fet Bus Switch With Internal Pulldown Resistors.

SY10/100E457 : . s Differential D and Q s Extended 100E VEE range to ­5.5V VBB output for single-ended use 700ps max. propagation delay High frequency outputs Separate and common select Internal 75K input pulldown resistors Available in 28-pin PLCC package The SY10/100E457 are 3-bit differential 2:1 multiplexers. The fully differential data path makes the devices ideal.

EP3CLS100F484 : FPGA, 47 CLBS, PBGA484. s: Device Type: FPGA ; Logic Cells / Logic Blocks: 47 ; Package Type: Other, FBGA-484 ; Pins: 484 ; Supply Voltage: 1.2V.

XCR3032XL-10CSG48C : EE PLD, 10 ns, PBGA48. s: Package Type: Other, 0.80 MM PITCH, LEAD FREE, CSP-48 ; Logic Family: CMOS ; Pins: 48 ; Internal Frequency: 95 MHz ; User I/Os: 36 pins ; Propagation Delay: 10 ns ; Operating Temperature: 0 to 70 C (32 to 158 F) ; Supply Voltage: 3.3V.

74AHCT3G04DP,125 : AHCT/VHCT/VT SERIES, TRIPLE 1-INPUT INVERT GATE, PDSO8. s: Gate Type: NOT ; Supply Voltage: 5V ; Logic Family: CMOS ; Inputs: 1 ; Propagation Delay: 10 ns ; Operating Temperature: -40 to 125 C (-40 to 257 F) ; Pin Count: 8 ; IC Package Type: TSSOP, Other, 3 MM, PLASTIC, SOT505-2, TSSOP-8.

935174680118 : HC/UH SERIES, QUAD 2 LINE TO 1 LINE MULTIPLEXER, TRUE OUTPUT, PDSO16. s: Output Characteristics: 3-State, TRUE ; Supply Voltage: 4.5 ; Package Type: TSSOP, 4.40 MM, PLASTIC, MO-153, SOT-403-1, TSSOP-16 ; Logic Family: CMOS ; Number of Pins: 16 ; Inputs: 2 ; Propagation Delay: 165 ns ; Operating Temperature: -40 to 125 C (-40 to 257 F).

0-C     D-L     M-R     S-Z