Details, datasheet, quote on part number: IDT54FCT162245ATPA
PartIDT54FCT162245ATPA
CategoryLogic => Bus Interface => Bus Oriented Circuits
TitleBus Oriented Circuits
DescriptionFast CMOS 16-bit Bi-directional Transceiver
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT54FCT162245ATPA datasheet
Quote
Find where to buy
 
  

 

Features, Applications

MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tSK(o) (Output Skew) < 250ps Low input and output leakage 1 A (max.) ESD > 2000V per MIL-STD-883, Method > 200V using machine model = 0) Balanced Output Drivers: 24mA (industrial) 16mA (military) Reduced system switching noise Typical VOLP (Output Ground Bounce) 0.6V at VCC = 25C Available in the following packages: Industrial: SSOP, TSSOP, TVSOP Military: CERPACK

The FCT162245T 16-bit transceiver is built using advanced dual metal CMOS technology. These high-speed, low-power transceivers are ideal for synchronous communication between two busses (A and B). The Direction and Output Enable controls operate these devices as either two independent 8-bit transceivers or one 16-bit transceiver. The direction control pin (xDIR) controls the direction of data flow. The output enable pin (xOE) overrides the direction control and disables both ports. All inputs are designed with hysteresis for improved noise margin. The FCT162245T has balanced output drive with current limiting resistors. This offers low ground bounce, minimal undershoot, and controlled output fall times reducing the need for external series terminating resistors. The is a plug-in replacement for the FCT16245T and ABT16245 for on-board interface applications.

Description Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Storage Temperature DC Output Current

NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. All terminals except exceptFCT162XXX FCT162XXXT and FCT166XXXT (APort) Output I/O terminals. All device terminals terminals.for FCT162XXX. 3. Output and I/O terminals 3. Output and I/O terminals for FCT162XXXT and FCT166XXXT (A-Port).

Symbol CIN COUT Parameter(1) Input Capacitance Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 3.5 Max. 6 8 Unit pF

NOTE: 1. This parameter is measured at characterization but not tested.

Pin Names xOE xDIR xAx xBx Description Output Enable Input (Active LOW) Direction Control Input Side A Inputs or 3-State Outputs Side B Inputs or 3-State Outputs

Inputs xOE L H xDIR H X Outputs Bus B Data to Bus A Bus A Data to Bus B High Z State
NOTE: H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care Z = High-Impedance

Following Conditions Apply Unless Otherwise Specified: Industrial: to +85C, VCC 5.0V 10%; Military: to +125C, VCC 5.0V 10%

Symbol VIH VIL IIH IIL IOZH IOZL VIK IOS VH ICCL ICCH ICCZ Parameter Input HIGH Level Input LOW Level Input HIGH Current (Input pins)(5) Input HIGH Current (I/O pins)(5) Input LOW Current (Input pins)(5) Input LOW Current (I/O pins)(5) High Impedance Output Current (3-State Output pins)(5) Clamp Diode Voltage Short Circuit Current Input Hysteresis Quiescent Power Supply Current VCC = Max. VIN = GND or VCC = Min., IIN = 18mA VCC = Max., = GND(3) VCC = Max. VI = GND Test Conditions(1) Guaranteed Logic HIGH Level Guaranteed Logic LOW Level VCC = Max. VI = VCC Min. 80 Typ.(2) Max. mV A Unit V A

Symbol IODL IODH VOH VOL Parameter Output LOW Current Output HIGH Current Output HIGH Voltage Output LOW Voltage Test Conditions(1) VCC = 5V, VIN = VIH or VIL, = 1.5V(3) VCC = 5V, VIN = VIH or VIL, = 1.5V(3) VCC = Min. VIN = VIH or VIL VCC = Min. VIN = VIH or VIL IOH = 16mA MIL IOH = 24mA IND. IOL = 16mA MIL IOL = 24mA IND.

NOTES: 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC 5.0V, +25C ambient. 3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. 4. Duration of the condition can not exceed one second. 5. The test limit for this parameter = -55C.


 

Related products with the same datasheet
IDT54FCT162245ATE
IDT54FCT162245ATEB
IDT54FCT162245ATPAB
IDT54FCT162245ATPF
IDT54FCT162245ATPFB
IDT54FCT162245ATPV
IDT54FCT162245ATPVB
IDT54FCT162245CT
IDT54FCT162245CTE
IDT54FCT162245CTEB
IDT54FCT162245CTPA
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT54FCT162245ATPAB Fast CMOS 16-bit Bi-directional Transceiver
IDT54FCT162245ET Fast CMOS 16-bit Bidirectional Transceivers
IDT54FCT162245ETE Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT162245T Fast CMOS 16-bit Bi-directional Transceiver
IDT54FCT162260 Fast CMOS 12-bit Tri-port Bus Exchanger
IDT54FCT162260AT
IDT54FCT162260ET
IDT54FCT162344 Fast CMOS Address/clock Driver
IDT54FCT162344AT
IDT54FCT162373 Fast CMOS 16-bit Transparent Latch
IDT54FCT162373AT

IDT74FCT16240CTPFB : Bus Oriented Circuits Fast CMOS 16-bit Buffer/line Driver

IDT74LVCH32244A : CMOS/BiCMOS->LVC/ALVC/VCX Family->Low Voltage 3.3v CMOS 32-bit Buffer/line Driver With 3-state Outputs, 5v Tolerant I/o, Bus-hold

IDT79RC4650 : RISC->RISC 64-bit Riscontroller With DSP Capability

ICS840051AGLF : Clock/timing - Clock Generators, Plls, Frequency Synthesizer Integrated Circuit (ics) Clock/Frequency Synthesizer, Clock Generator Tube 3.135 V ~ 3.465 V; IC CLOCK GENERATOR 8-TSSOP Specifications: Type: Clock/Frequency Synthesizer, Clock Generator ; PLL: Yes ; Input: Crystal ; Output: LVCMOS, LVTTL ; Frequency - Max: 170MHz ; Number of Circuits: 1 ; Ratio - Input Output: 1 1 ; Differential - Input Output: No/No ; Divider/Multiplier: Yes/No ; Voltage - Supply: 3.135 V ~ 3.465 V

IDT3CP0C02-8NSGET : Clock/timing - Programmable Timer And Oscillator Integrated Circuit (ics) Programmable Timer 1.62 V ~ 3.6 V; IC OSC PROGRAMMABLE TIMER 24MHZ Specifications: Type: Programmable Timer ; Frequency: 24MHz ; Count: - ; Voltage - Supply: 1.62 V ~ 3.6 V ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ICS951402YF-T : 210 MHz, PROC SPECIFIC CLOCK GENERATOR, PDSO48 Specifications: Device Type: Clock Generator ; Package Type: Surface Mount, SSOP, MO-118, SSOP-48 ; Supply Voltage: 3.14 to 3.46 volts ; Frequency: 14.32 MHz ; Operating Temperature: 0.0 to 70 C (32 to 158 F)

IDT7005S55GGI : 8K X 8 DUAL-PORT SRAM, 15 ns, PQFP68 Specifications: Memory Category: SRAM Chip ; Density: 66 kbits ; Number of Words: 8 k ; Bits per Word: 8 bits ; Package Type: QFP, 0.970 X 0.970 INCH, 0.080 INCH HEIGHT, GREEN, QFP-68 ; Pins: 68 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 15 ns ; Operating Temperature: 0 to 70 C (32 to

IDT7054S45GGB : 4K X 8 MULTI-PORT SRAM, 15 ns, PQFP120 Specifications: Memory Category: SRAM Chip ; Density: 33 kbits ; Number of Words: 4 k ; Bits per Word: 8 bits ; Package Type: TQFP, TQFP-120 ; Pins: 120 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 15 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT71V124HSA10YGI : 128K X 8 STANDARD SRAM, 10 ns, PDSO32 Specifications: Memory Category: SRAM Chip ; Density: 1049 kbits ; Number of Words: 128 k ; Bits per Word: 8 bits ; Package Type: TSOP, ROHS COMPLIANT, TSOP2-32 ; Pins: 32 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 10 ns ; Operating Temperature: -40 to 85 C (-40 to 185 F)

IDT74FBT2841BE : BCT/FBT SERIES, 10-BIT DRIVER, TRUE OUTPUT, CDIP24 Specifications: Technology: BICMOS ; Device Type: Line / Bus Driver ; Supply Voltage: 5V ; Operating Temperature: 0 to 70 C (32 to 158 F) ; Package Type: 0.300 INCH, CERDIP-24 ; Pins: 24

7016L25JB : 16K X 9 DUAL-PORT SRAM, 25 ns, PQCC68 Specifications: Memory Category: SRAM Chip ; Density: 147 kbits ; Number of Words: 16 k ; Bits per Word: 9 bits ; Package Type: PLASTIC, LCC-68 ; Pins: 68 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 25 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

7034S15PF : 4K X 18 DUAL-PORT SRAM, 15 ns, PQFP100 Specifications: Memory Category: SRAM Chip ; Density: 74 kbits ; Number of Words: 4 k ; Bits per Word: 18 bits ; Package Type: TQFP, 14 X 14 MM, 1.40 MM HEIGHT, TQFP-100 ; Pins: 100 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 15 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

 
0-C     D-L     M-R     S-Z