Details, datasheet, quote on part number: IDT54FCT162245ETPFB
PartIDT54FCT162245ETPFB
CategoryLogic => Transceivers => 16/32-Bit Bus Transceiver->CMOS/BiCMOS->FCT/FCT-T
Title16/32-Bit Bus Transceiver->CMOS/BiCMOS->FCT/FCT-T
DescriptionFast CMOS 16-bit Bidirectional Transceiver
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT54FCT162245ETPFB datasheet
Quote
Find where to buy
 
  

 

Features, Applications

MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tSK(o) (Output Skew) < 250ps Low input and output leakage 1 A (max.) ESD > 2000V per MIL-STD-883, Method > 200V using machine model 0) 25 mil pitch SSOP, 19.6 mil pitch TSSOP, 15.7 mil pitch TVSOP and 25 mil pitch CERPACK packages Extended commercial range to +85C Balanced Output Drivers: 24mA (commercial) 16mA (military) Reduced system switching noise Typical VOLP (Output Ground Bounce) 0.6V at VCC = 25C

The FCT162245T 16-bit transceiver is built using advanced dual metal CMOS technology. These high-speed, low-power transceivers are ideal for synchronous communication between two busses (A and B). The Direction and Output Enable controls operate these devices as either two independent 8-bit transceivers or one 16-bit transceiver. The direction control pin (xDIR) controls the direction of data flow. The output enable pin (xOE) overrides the direction control and disables both ports. All inputs are designed with hysteresis for improved noise margin. The FCT162245T has balanced output drive with current limiting resistors. This offers low ground bounce, minimal undershoot, and controlled output fall times reducing the need for external series terminating resistors. The FCT162245T are plug-in replacements for the FCT16245T and ABT16245 for on-board interface applications.

Description Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Storage Temperature DC Output Current

NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. All terminals except exceptFCT162XXXT FCT162XXXT and FCT166XXXT (APort) Output and I/O terminals. All device terminals terminals.for FCT162XXXT. 3. Output and I/O terminals 3. Output and I/O terminals for FCT162XXXT and FCT166XXXT (A-Port).

Symbol CIN COUT Parameter(1) Input Capacitance Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 3.5 Max. 6 8 Unit pF

NOTE: 1. This parameter is measured at characterization but not tested.

Pin Names xOE xDIR xAx xBx Description Output Enable Input (Active LOW) Direction Control Input Side A Inputs or 3-State Outputs Side B Inputs or 3-State Outputs

Inputs xOE L H xDIR H X Outputs Bus B Data to Bus A Bus A Data to Bus B High Z State
NOTE: H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care Z = High-Impedance

Following Conditions Apply Unless Otherwise Specified: Commercial: to +85C, VCC 5.0V 10%; Military: to +125C, VCC 5.0V 10%

Symbol VIH VIL IIH IIL IOZH IOZL VIK IOS VH ICCL ICCH ICCZ Parameter Input HIGH Level Input LOW Level Input HIGH Current (Input pins)(5) Input HIGH Current (I/O pins)(5) Input LOW Current (Input pins)(5) Input LOW Current (I/O pins)(5) High Impedance Output Current (3-State Output pins)(5) Clamp Diode Voltage Short Circuit Current Input Hysteresis Quiescent Power Supply Current VCC = Max. VIN = GND or VCC = Min., IIN = 18mA VCC = Max., = GND(3) VCC = Max. VI = GND Test Conditions(1) Guaranteed Logic HIGH Level Guaranteed Logic LOW Level VCC = Max. VI = VCC Min. 80 Typ.(2) Max. mV A Unit V A

Symbol IODL IODH VOH VOL Parameter Output LOW Current Output HIGH Current Output HIGH Voltage Output LOW Voltage Test Conditions(1) VCC = 5V, VIN = VIH or VIL, = 1.5V(3) VCC = 5V, VIN = VIH or VIL, = 1.5V(3) VCC = Min. VIN = VIH or VIL VCC = Min. VIN = VIH or VIL IOH = 16mA MIL IOH = 24mA COM'L IOL = 16mA MIL IOL = 24mA COM'L

NOTES: 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC 5.0V, +25C ambient. 3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. 4. Duration of the condition can not exceed one second. 5. The test limit for this parameter = -55C.


 

Related products with the same datasheet
IDT54FCT162245ETE
IDT54FCT162245ETEB
IDT54FCT162245ETPA
IDT54FCT162245ETPAB
IDT54FCT162245ETPF
IDT54FCT162245ETPV
IDT54FCT162245ETPVB
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT54FCT162245ETPV Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT162245T Fast CMOS 16-bit Bi-directional Transceiver
IDT54FCT162260 Fast CMOS 12-bit Tri-port Bus Exchanger
IDT54FCT162260AT
IDT54FCT162260ET
IDT54FCT162344 Fast CMOS Address/clock Driver
IDT54FCT162344AT
IDT54FCT162373 Fast CMOS 16-bit Transparent Latch
IDT54FCT162373AT

IDT54FCT162952BTPAB : Bus Oriented Circuits Fast CMOS 16-bit Registered Transceiver

IDT71342 : Multi-Ports 4K X 8 Dual-port RAM W/semphore

IDT72251L25JI : CMOS Supersync FIFO

IDT71V546XS133PF : Memory Integrated Circuit (ics) SRAM - Synchronous ZBT Tray 3.135 V ~ 3.465 V; IC SRAM 4MBIT 133MHZ 100TQFP Specifications: Memory Type: SRAM - Synchronous ZBT ; Memory Size: 4M (128K x 36) ; Speed: 133MHz ; Interface: Parallel (Byte-wide) ; Package / Case: 100-LQFP ; Packaging: Tray ; Voltage - Supply: 3.135 V ~ 3.465 V ; Operating Temperature: 0C ~ 70C ; Format - Memory: RAM ; Lead Free Status: Contai

ICS525RI-11LFT : 195 MHz, OTHER CLOCK GENERATOR, PDSO28 Specifications: Device Type: Clock Generator ; Bus Interface: CMOS ; Package Type: Surface Mount, SSOP, 0.150 INCH, 0.025 INCH PITCH, ROHS COMPLIANT, MO-153, SSOP-28 ; Supply Voltage: 4.5 to 5.5 volts ; Frequency: 50 MHz ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Features / Standards: RoH

IDT6116SA20SOGI8 : 2K X 8 STANDARD SRAM, 120 ns, CDIP24 Specifications: Memory Category: SRAM Chip ; Density: 16 kbits ; Number of Words: 2 k ; Bits per Word: 8 bits ; Package Type: DIP, 0.600 INCH, CERAMIC, DIP-24 ; Pins: 24 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 120 ns ; Operating Temperature: -55 to 125 C (-67 to 257 F)

IDT72221L25PFI : 1K X 8 OTHER FIFO, 6.5 ns, UUC28 Specifications: Memory Category: FIFO ; Density: 8 kbits ; Number of Words: 1 k ; Bits per Word: 8 bits ; Package Type: DIE ; Pins: 28 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 6.5 ns ; Cycle Time: 10 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT72291L20PFI9 : 128K X 9 OTHER FIFO, 6.5 ns, PQFP64 Specifications: Memory Category: FIFO ; Density: 1180 kbits ; Number of Words: 128 k ; Bits per Word: 9 bits ; Package Type: TQFP, PLASTIC, TQFP-64 ; Pins: 64 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 6.5 ns ; Cycle Time: 10 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT72V8980J8 : TELECOM, DIGITAL TIME SWITCH, PQFP44 Specifications: Supply Voltage (VS): 3.3 volts ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Number of Pins: 44 ; Package Type: QFP, 10 X 10 MM, 0.80 MM PITCH, PLASTIC, QFP-44 ; Standards and Certifications: RoHS

70V24S20PFGI : IC,SRAM,4KX16,CMOS,PGA,84PIN,CERAMIC Specifications: Memory Category: SRAM Chip

7133SA90FB : 2K X 16 DUAL-PORT SRAM, 90 ns, CQFP68 Specifications: Memory Category: SRAM Chip ; Density: 33 kbits ; Number of Words: 2 k ; Bits per Word: 16 bits ; Package Type: 1.180 X 1.180 INCH, 0.160 INCH HEIGHT, FP-68 ; Pins: 68 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 90 ns ; Operating Temperature: -55 to 125 C (-67 to 257 F)

71T75802S200PFGI : 1M X 18 ZBT SRAM, PBGA119 Specifications: Memory Category: SRAM Chip ; Density: 18874 kbits ; Number of Words: 1000 k ; Bits per Word: 18 bits ; Package Type: BGA, 14 X 22 MM, MS-028AA, BGA-119 ; Pins: 119 ; Supply Voltage: 2.5V ; Operating Temperature: 0 to 70 C (32 to 158 F)

 
0-C     D-L     M-R     S-Z