|Category||Logic => Bus Interface => CMOS/BiCMOS->FCT/FCT-T Family|
|Description||Fast CMOS 12-bit Tri-port Bus Exchanger|
|Company||Integrated Device Technology, Inc.|
|Datasheet||Download IDT54FCT162260ETPA datasheet
MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tSK(o) (Output Skew) < 250ps Low input and output leakage 1µ A (max.) ESD > 2000V per MIL-STD-883, Method > 200V using machine model 0) 25 mil pitch SSOP, 19.6 mil pitch TSSOP,15.7 mil pitch TVSOP and 25 mil pitch CERPACK packages Extended commercial range to +85°C VCC 5V ±10% Balanced Output Drivers: ±24mA (commercial) ±16mA (military) Reduced system switching noise Typical VOLP (Output Ground Bounce) 0.6V at VCC = 25°C
The FCT162260AT/CT/ET Tri-Port Bus Exchangers are high-speed 12-bit latched bus multiplexers/transceivers for use in high-speed microprocessor applications. These Bus Exchangers support memory interleaving with latched outputs on the B ports and address multiplexing with latched inputs on the B ports. The Tri-Port Bus Exchanger has three 12-bit ports. Data may be transferred between the A port and either/both of the B ports. The latch enable LE2B, LEA1B and LEA2B) inputs control data storage. When a latch-enable input is high, the latch is transparent. When a latchenable input is low, the data at the input is latched and remains latched until the latch enable input is returned high. Independent output enables (OE1B and OE2B) allow reading from one port while writing to the other port. The FCT162260AT/CT/ET have balanced output drive with current limiting resistors. This offers low ground bounce, minimal undershoot, and controlled output fall times - reducing the need for external series terminating resistors.
Symbol VTERM(2) VTERM(3) TSTG IOUT Description Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Storage Temperature DC Output Current Max to +120 Unit °C mA
NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. All device terminals except FCT162XXXT Output and I/O terminals. 3. Output and I/O terminals for FCT162XXXT.
Symbol CIN COUT Parameter(1) Input Capacitance Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 3.5 Max. 6 8 Unit pFNOTE: 1. This parameter is measured at characterization but not tested.
Signal LE1B LE2B SEL OEA OE1B OE2B I/O Description Bidirectional Data Port A. Usually connected to the CPU's Address/Data bus. Bidirectional Data Port 1B. Connected to the even path or even bank of memory. Bidirectional Data Port 2B. Connected to the odd path or odd bank of memory. Latch Enable Input for A-1B Latch. The Latch is open when LEA1B is HIGH. Data from the A-port is latched on the HIGH to LOW transition of LEA1B. Latch Enable Input for A-2B Latch. The Latch is open when LEA2B is HIGH. Data from the A-Port is latched on the HIGH to LOW transition of LEA2B. Latch Enable Input for the 1B-A Latch. The Latch is open when LE1B is HIGH. Data from the 1B port is latched on the HIGH to LOW transition of LE1B. Latch Enable Input for the 2B-A Latch. The Latch is open when LE2B is HIGH. Data from the 2B port is latched on the HIGH to LOW transition or 2B Path Selection. When HIGH, SEL enables data transfer from 1B Port to A Port. When LOW, SEL enables data transfer from 2B Port to A Port. Output Enable for A Port (Active LOW). Output Enable for 1B Port (Active LOW). Output Enable for 2B Port (Active LOW).
NOTES: 1. Output level before the indicated steady-state input conditions were established. H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care Z = High-Impedance
|Related products with the same datasheet|
|Some Part number from the same manufacture Integrated Device Technology, Inc.|
|IDT54FCT162260ETPAB Fast CMOS 12-bit Tri-port Bus Exchanger|
|IDT54FCT162344 Fast CMOS Address/clock Driver|
|IDT54FCT162373 Fast CMOS 16-bit Transparent Latch|
|IDT54FCT162374 Fast CMOS 16-bit Register (3-state)|
IDT54FCT2645CTLB : Fast CMOS Octal Bidirectional Transceivers
IDT7027L25G : High-speed 32k X 16 Dual-port Static RAM
IDT75K62413 : 9M Integrated Network Search Engine (NSE) With Quad Amcc XSC Interface
IDT54240DTP : FAST CMOS Octal Buffer/line Drivers
IDT71256TTSA25Y : Memory Integrated Circuit (ics) SRAM - Asynchronous Tube 4.5 V ~ 5.5 V; IC SRAM 256KBIT 25NS 28SOJ Specifications: Memory Type: SRAM - Asynchronous ; Memory Size: 256K (32K x 8) ; Speed: 25ns ; Interface: Parallel (Byte-wide) ; Package / Case: 28-BSOJ ; Packaging: Tube ; Voltage - Supply: 4.5 V ~ 5.5 V ; Operating Temperature: 0°C ~ 70°C ; Format - Memory: RAM ; Lead Free Status: Contains Lead ;
IDT70V631S12PRF8 : 256K X 18 3.3V Dual-port RAM, Interleaved I/o's
TTS92256GK-25I-1 : IC,SRAM,32KX8,CMOS,FP,28PIN,CERAMIC Specifications: Memory Category: SRAM Chip
5V928PGGI : 160 MHz, OTHER CLOCK GENERATOR, PDSO24 Specifications: Device Type: Clock Generator ; Package Type: Surface Mount, TSSOP, GREEN, TSSOP-24 ; Supply Voltage: 3 to 3.6 volts ; Frequency: 80 MHz ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Features / Standards: RoHS, Lead-Free
71V65903S80PFGI8 : 512K X 18 ZBT SRAM, 7.5 ns, PBGA119 Specifications: Memory Category: SRAM Chip ; Density: 9437 kbits ; Number of Words: 512 k ; Bits per Word: 18 bits ; Package Type: BGA, 14 X 22 MM, PLASTIC, MS-026AA, BGA-119 ; Pins: 119 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 7.5 ns ; Operating Temperature: 0 to 70 C (32 to 158 F
8440258AKI-45LFT : 125 MHz, OTHER CLOCK GENERATOR, QCC32 Specifications: Device Type: Clock Generator ; Package Type: Surface Mount, 5 X 5 MM, 0.925 MM HEIGHT, ROHS COMPLIANT, MO-220VHHD-2, VFQFN-32 ; Supply Voltage: 2.38 to 2.62 volts ; Frequency: 25 MHz ; Operating Temperature: 0.0 to 70 C (32 to 158 F) ; Features / Standards: RoHS, Lead-Free