Details, datasheet, quote on part number: IDT54FCT162344CTPAB
PartIDT54FCT162344CTPAB
CategoryLogic => Clock Drivers/Distribution => CMOS/BiCMOS->FCT/FCT-T Family
TitleCMOS/BiCMOS->FCT/FCT-T Family
DescriptionFast CMOS Address/clock Driver
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT54FCT162344CTPAB datasheet
Quote
Find where to buy
 
  

 

Features, Applications

0.5 MICRON CMOS Technology Ideal for address line driving and clock distribution 8 banks with 1:4 fanout and 3-state Typical tSK(o) (Output Skew) < 500ps Balanced Output Drivers (24mA) Reduced system switching noise ESD > 2000V per MIL-STD-883, Method > 200V using machine model = 0) VCC 10% Low input and output leakage 1A (max.) Available in SSOP and TSSOP packages

The a 1:4 address/clock driver built using advanced dual metal CMOS technology. This high-speed, low power device provides the ability to fanout to memory arrays. Eight banks, each with a fanout of 4, and 3-state control provide efficient address distribution. One or more banks may be used for clock distribution. The FCT162344T has balanced output drive with current limiting resistors. This offers low ground bounce, minimal undershoot and controlled output fall times reducing the need for external series terminating resistors. A large number of power and ground pins and TTL output swings also ensure reduced noise levels. All inputs are designed with hysteresis for improved noise margins.


The IDT logo is a registered trademark of Integrated Device Technology, Inc.

Symbol VTERM(2) VTERM(3) TSTG IOUT Description Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Storage Temperature DC Output Current Max to +120 Unit C mA

NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. All device terminals except FCT162XXX Output and I/O terminals. 3. Output and I/O terminals for FCT162XXX.

Symbol CIN COUT Parameter(1) Input Capacitance Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 3.5 Max. 6 8 Unit pF

NOTE: 1. This parameter is measured at characterization but not tested.
Pin Names x Ax Bxx Inputs 3-State Outputs Description 3-State Output Enable Inputs (Active LOW)
NOTE: H = HIGH Voltage Level X = Don't Care L = LOW Voltage Level Z = High-Impedance
Following Conditions Apply Unless Otherwise Specified: Industrial: to +85C, VCC 5.0V 10%

Symbol VIH VIL IIH Parameter Input HIGH Level Input LOW Level Input HIGH Current (Input pins)(4) Input HIGH Current (I/O pins)(4) IIL Input LOW Current (Input pins)(4) Input LOW Current (I/O pins)(4) IOZH IOZL VIK IOS VH ICCL ICCH ICCZ High Impedance Output Current (3-State Output pins)(4) Clamp Diode Voltage Short Circuit Current Input Hysteresis Quiescent Power Supply Current VCC = Max. VIN = GND or VCC = Min., IIN = 18mA VCC = Max., = GND(3) VCC = Max. VI = GND Test Conditions(1) Guaranteed Logic HIGH Level Guaranteed Logic LOW Level VCC = Max. VI = VCC Min. 80 Typ.(2) Max. mV A Unit V A

Symbol IODL IODH VOH VOL Parameter Output LOW Current Output HIGH Current Output HIGH Voltage Output LOW Voltage Test Conditions(1) VCC = 5V, VIN = VIH or VIL, = 1.5V(3) VCC = 5V, VIN = VIH or VIL, = 1.5V(3) VCC = Min IOH = 24mA VIN = VIH or VIL VCC = Min IOH = 24mA VIN = VIH or VIL Min. 2.4 Typ.(2) Max. 200 0.55 Unit mA V

NOTES: 1. For conditions shown as Min. or Max., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC 5.0V, +25C ambient. 3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. 4. This test limit for this parameter = 55C.


 

Related products with the same datasheet
IDT54FCT162344ATE
IDT54FCT162344ATEB
IDT54FCT162344ATPA
IDT54FCT162344ATPAB
IDT54FCT162344ATPF
IDT54FCT162344ATPFB
IDT54FCT162344ATPV
IDT54FCT162344ATPVB
IDT54FCT162344CT
IDT54FCT162344CTE
IDT54FCT162344CTEB
IDT54FCT162344CTPA
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT54FCT162344CTPF Fast CMOS Address/clock Driver
IDT54FCT162373 Fast CMOS 16-bit Transparent Latch
IDT54FCT162373AT
IDT54FCT162374 Fast CMOS 16-bit Register (3-state)
IDT54FCT162374AT
IDT54FCT16240 Fast CMOS 16-bit Buffer/line Driver
IDT54FCT16240AT

IDT7016S12J : Multi-Ports 16K X 9 Dual-port RAM

IDT70T631S8BCI : High-speed 2.5v 512/256k X 18 Asynchronous Dual-port Static RAM With 3.3v 0r 2.5v Interface

IDT7201LA65TD : CMOS Asynchronous Fifo 256 X 9, 512 X 9, 1k X 9

MK3724G : Clock/timing - Clock Generators, Plls, Frequency Synthesizer Integrated Circuit (ics) PLL Clock Synthesizer, VCXO Tube 3.135 V ~ 3.465 V; IC VCXO DTV/SET-TOP 16-TSSOP Specifications: Type: PLL Clock Synthesizer, VCXO ; PLL: Yes with Bypass ; Input: Crystal ; Output: LVCMOS ; Frequency - Max: 73.728MHz ; Number of Circuits: 1 ; Ratio - Input Output: 1 2 ; Differential - Input Output: No/No ; Divider/Multiplier: No/No ; Voltage - Supply: 3.135 V ~ 3.465 V ; Operati

IDT7006L20JGB : 16K X 8 DUAL-PORT SRAM, 15 ns, PQFP68 Specifications: Memory Category: SRAM Chip ; Density: 131 kbits ; Number of Words: 16 k ; Bits per Word: 8 bits ; Package Type: 0.970 X 0.970 INCH, 0.080 INCH HEIGHT, GREEN, FP-68 ; Pins: 68 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 15 ns ; Operating Temperature: 0 to 70 C (32 to 158

IDT71V65603S100PFG : 256K X 36 ZBT SRAM, 5 ns, PBGA119 Specifications: Memory Category: SRAM Chip ; Density: 9437 kbits ; Number of Words: 256 k ; Bits per Word: 36 bits ; Package Type: BGA, 14 X 22 MM, MS-028AA, BGA-119 ; Pins: 119 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 5 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT72205LB10TF9 : 256 X 8 OTHER FIFO, 6.5 ns, UUC28 Specifications: Memory Category: FIFO ; Density: 2 kbits ; Number of Words: 256 k ; Bits per Word: 8 bits ; Package Type: DIE ; Pins: 28 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 6.5 ns ; Cycle Time: 10 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT72285L15PFG : 64K X 18 OTHER FIFO, 6.5 ns, PQFP64 Specifications: Memory Category: FIFO ; Density: 1180 kbits ; Number of Words: 64 k ; Bits per Word: 18 bits ; Package Type: TQFP, PLASTIC, TQFP-64 ; Pins: 64 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 6.5 ns ; Cycle Time: 10 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

71256S70DB : 32K X 8 STANDARD SRAM, 70 ns, CDIP28 Specifications: Memory Category: SRAM Chip ; Density: 262 kbits ; Number of Words: 32 k ; Bits per Word: 8 bits ; Package Type: DIP, 0.600 INCH, CERAMIC, DIP-28 ; Pins: 28 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 70 ns ; Operating Temperature: -55 to 125 C (-67 to 257 F)

71V321S35J8 : 2K X 8 DUAL-PORT SRAM, 35 ns, PQCC52 Specifications: Memory Category: SRAM Chip ; Density: 16 kbits ; Number of Words: 2 k ; Bits per Word: 8 bits ; Package Type: 0.750 X 0.750 INCH, 0.170 INCH HEIGHT, GREEN, PLASTIC, LCC-52 ; Pins: 52 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 35 ns ; Operating Temperature: 0 to 70 C (

 
0-C     D-L     M-R     S-Z