Details, datasheet, quote on part number: IDT54FCT166245TPF
PartIDT54FCT166245TPF
CategoryLogic => Transceivers => 16/32-Bit Bus Transceiver->CMOS/BiCMOS->FCT/FCT-T
Title16/32-Bit Bus Transceiver->CMOS/BiCMOS->FCT/FCT-T
DescriptionFast CMOS 16-bit Bidirectional Transceiver
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT54FCT166245TPF datasheet
Quote
Find where to buy
 
  

 

Features, Applications

MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tSK(o) (Output Skew) < 250ps Low input and output leakage 1 A (max.) ESD > 2000V per MIL-STD-883, Method > 200V using machine model 0) 25 mil pitch SSOP, 19.6 mil pitch TSSOP, 15.7 mil pitch TVSOP and 25 mil pitch CERPACK packages Extended commercial range to +85C Light Drive A Port: 8mA (commercial) 6mA (military) High Drive B Port: +64mA, 32mA (commercial) +48mA, 24mA (military) Minimal system switching noise Typical VOLP (Output Ground Bounce) 0.25V at VCC 25C (A Port Switching)

The 16-bit transceivers are built using advanced dual metal CMOS technology. These high-speed, low-power transceivers are ideal for synchronous communication between two buses (A and B). The Direction and Output Enable controls operate these devices as either two independent 8-bit transceivers or one 16-bit transceiver. The direction control pin (xDIR) controls the direction of data flow. The output enable pin (xOE) overrides the direction control and disables both ports. All inputs are designed with hysteresis for improved noise margin. The FCT166245T is suited for very low noise, point-to-point driving where there is a single receiver, or a light lumped load (<100pF). The buffers are designed to limit the output current to levels which will avoid noise and ringing on the signal lines without using external series terminating resistors. These parts have a 8mA driver on the "A" Port and a +64/32mA driver on the "B" Port, making them ideal for interfacing noisy system busses to noise sensitive interfaces.

Description Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Storage Temperature DC Output Current

NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. All terminals except exceptFCT162XXXT FCT162XXXT and FCT166XXXT (APort) Output and I/O terminals. All device terminals terminals.for FCT162XXXT. 3. Output and I/O terminals 3. Output and I/O terminals for FCT162XXXT and FCT166XXXT (A-Port).

Symbol CIN COUT Parameter(1) Input Capacitance Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 3.5 Max. 6 8 Unit pF

NOTE: 1. This parameter is measured at characterization but not tested.

Pin Names xOE xDIR xAx xBx Description Output Enable Input (Active LOW) Direction Control Input Side A Inputs 3-State Outputs(1) Side B Inputs 3-State Outputs(2)

Inputs xOE L H xDIR H X Outputs Bus B Data to Bus A Bus A Data to Bus B High Z State
NOTE: H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care Z = High-Impedance
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE (STANDARD PARTS)

Following Conditions Apply Unless Otherwise Specified: Commercial: to +85C, VCC 5.0V 10%; Military: to +125C, VCC 5.0V 10%

Symbol VIH VIL IIH IIL IOZH IOZL VIK IOS VH ICCL ICCH ICCZ Parameter Input HIGH Level Input LOW Level Input HIGH Current (Input pins)(5) Input HIGH Current (I/O pins)(5) Input LOW Current (Input pins)(5) Input LOW Current (I/O pins)(5) High Impedance Output Current (3-State Output pins)(5) Clamp Diode Voltage Short Circuit Current Input Hysteresis Quiescent Power Supply Current VCC = Max. VIN = GND or VCC = Min., IIN = 18mA VCC = Max., = GND(3) VCC = Max. VI = GND Test Conditions(1) Guaranteed Logic HIGH Level Guaranteed Logic LOW Level VCC = Max. VI = VCC Min. 80 Typ.(2) Max. mV A Unit V A

Symbol IODL IODH VOH VOL Parameter Output LOW Current Output HIGH Current Output HIGH Voltage Output LOW Voltage Test Conditions(1) VCC = 5V, VIN = VIH or VIL, = 1.5V(3) VCC = 5V, VIN = VIH or VIL, = 1.5V(3) VCC = Min. VIN = VIH or VIL VCC = Min. VIN = VIH or VIL IOH = 6mA MIL IOH = 8mA COM'L IOL = 6mA MIL IOL = 8mA COM'L 0.55 V Min. 48 3.3 Max. 96 96 Unit mA V

Symbol IO VOH Parameter Output Drive Current Output HIGH Voltage Test Conditions(1) VCC = Max., = 2.5V(3) VCC = Min. VIN = VIH or VIL IOH = 3mA IOH = 12mA MIL IOH = 15mA COM'L IOH = 24mA MIL IOH 32mA COM'L(4) VOL IOFF Output LOW Voltage Input/Output Power Off Leakage(5) VCC = Min. VIN = VIH or VIL VCC = 0V, VIN VO 4.5V IOL = 48mA MIL IOL = 64mA COM'L 0.2 0.55 Min. Typ.(2) 3.5 Max. 180 Unit mA V

NOTES: 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC 5.0V, +25C ambient. 3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. 4. Duration of the condition can not exceed one second. 5. The test limit for this parameter = -55C.


 

Related products with the same datasheet
IDT54FCT166245ATE
IDT54FCT166245ATEB
IDT54FCT166245ATPA
IDT54FCT166245ATPAB
IDT54FCT166245ATPF
IDT54FCT166245ATPFB
IDT54FCT166245ATPV
IDT54FCT166245ATPVB
IDT54FCT166245CTE
IDT54FCT166245CTEB
IDT54FCT166245CTPA
IDT54FCT166245CTPAB
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT54FCT166245TPFB Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT16646AT Fast CMOS 16-bit Bus Transceiver/ Register (3-state)
IDT54FCT16646CT Fast CMOS 16-bit Bidirectional Transceivers
IDT54FCT16646ET Fast CMOS 16-bit Bus Transceiver/ Register (3-state)
IDT54FCT16652AT Fast CMOS 16-bit Bus Transceiver/register
IDT54FCT16652ET
IDT54FCT16652T
IDT54FCT166H244ATE Fast CMOS 16-bit Buffer/line Driver
IDT54FCT166H244ATPB
IDT54FCT166H244ATPF

IDT54FCT623CTSOB : Fast CMOS Octal Bus Transceivers ( 3-state )

IDT54FCT825ATPY : High-performance CMOS Bus Interface Registers

IDT6167SA35PB : CMOS Static RAM 16k ( 16k X 1-bit )

IDT7005L55PFB : Multi-Ports 8K X 8 Dual-port RAM

IDT72T18115L10BB : 128K X 18 / 256K X 9 Terasync Fifo, 2.5V - Best Value!

IDT72V205L20PF8 : 3.3 VOLT HIGH Density CMOS Supersync FIFO 131,072 x 18 262,144 x 18

ICS8431EM-11T : OTHER CLOCK GENERATOR, PDSO16 Specifications: Device Type: Clock Generator ; Package Type: Surface Mount, TSSOP, 4.40 X 5 MM, 0.92 MM HEIGHT, MO-153, TSSOP-16 ; Supply Voltage: 2.38 to 2.62 volts ; Frequency: 50 MHz ; Operating Temperature: -40 to 85 C (-40 to 185 F)

IDT71T75602S133PFG8 : 512K X 36 ZBT SRAM, 5 ns, PBGA119 Specifications: Memory Category: SRAM Chip ; Density: 18874 kbits ; Number of Words: 512 k ; Bits per Word: 36 bits ; Package Type: BGA, 14 X 22 MM, MS-028-AA, BGA-119 ; Pins: 119 ; Logic Family: CMOS ; Supply Voltage: 2.5V ; Access Time: 5 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT74FCT2240ATE : FCT SERIES, DUAL 8-BIT DRIVER, TRUE OUTPUT, PDSO48 Specifications: Technology: CMOS ; Device Type: Line / Bus Driver ; Supply Voltage: 5V ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Package Type: TVSOP, TVSOP-48 ; Pins: 48 ; Features: RoHS

72V825L15PFI9 : 1K X 18 BI-DIRECTIONAL FIFO, 6.5 ns, PQFP128 Specifications: Memory Category: FIFO ; Density: 18 kbits ; Number of Words: 1 k ; Bits per Word: 18 bits ; Package Type: TQFP, TQFP-128 ; Pins: 128 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 6.5 ns ; Cycle Time: 10 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

85454AKT : 85454 SERIES, LOW SKEW CLOCK DRIVER, 3 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), QCC16 Specifications: Device Type: Clock Driver ; Package Type: Surface Mount, 3 X 3 MM, 0.95 MM HEIGHT, MO-220, VFQFN-16 ; Supply Voltage: 2.38 to 2.62 volts ; Operating Temperature: -40 to 85 C (-40 to 185 F)

 
0-C     D-L     M-R     S-Z