Details, datasheet, quote on part number: IDT54FCT16652ATPVB
PartIDT54FCT16652ATPVB
CategoryLogic => Bus Interface => Bus Oriented Circuits
TitleBus Oriented Circuits
DescriptionFast CMOS 16-bit Bus Transceiver/register
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT54FCT16652ATPVB datasheet
Quote
Find where to buy
 
  

 

Features, Applications

MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tSK(o) (Output Skew) < 250ps Low input and output leakage 1 A (max.) ESD > 2000V per MIL-STD-883, Method > 200V using machine model = 0) VCC 5V 10% High drive outputs (-32mA IOH, 64mA IOL) Power off disable outputs permit "live insertion" Typical VOLP (Output Ground Bounce) 1.0V at VCC = 25C Available in the following packages: Industrial: SSOP, TSSOP, TVSOP Military: CERPACK

The FCT16652T 16-bit registered transceivers are built using advanced dual metal CMOS technology. These high-speed, low-power devices are organized as two independent 8-bit bus transceivers with 3-state D-type registers. For example, the xOEAB and xOEBA signals control the transceiver functions. The xSAB and xSBA control pins are provided to select either real time or stored data transfer. The circuitry used for select control will eliminate the typical decoding glitch that occurs in a multiplexer during the transition between stored and real time data. A low input level selects real-time data and a high level selects stored data. Data on the or B data bus, or both, can be stored in the internal D-flipflops by low-to-high transitions at the appropriate clock pins (xCLKAB or xCLKBA), regardless of the select or enable control pins. Flow-through organization of signal pins simplifies layout. All inputs are designed with hysteresis for improved noise margin. The FCT16652T is ideally suited for driving high capacitance loads and low-impedance backplanes. The output buffers are designed with power off disable capability to allow "live insertion" of boards when used as backplane drivers.

Description Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Storage Temperature DC Output Current

NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. All device terminals except FCT162XXX Output and I/O terminals. 3. Output and I/O terminals for FCT162XXX.

Symbol CIN COUT Parameter(1) Input Capacitance Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 4.5 5.5 Max. 6 8 Unit pF

NOTE: 1. This parameter is measured at characterization but not tested.

Pin Names xAx xBx xCLKAB, xCLKBA xSAB, xSBA xOEAB, xOEBA Description Data Register A Inputs Data Register B Outputs Data Register B Inputs Data Register A Outputs Clock Pulse Inputs Output Data Source Select Inputs Output Enable Inputs

Inputs xOEAB xOEBA xCLKAB or L xCLKBA or L xSAB X X(2) xSBA X(2) xAx Input Unspecified(1) Output Input Output Data I/O(1) xBx Input Unspecified(1) Output Input Output Isolation Store A and B Data Store A, Hold B Store A in Both Registers Hold A, Store B Store B in both Registers Real Time B Data to A Bus Stored B Data to A Bus Real Time A Data to B Bus Stored A Data to B Bus Stored A Data to B Bus and Stored B Data to A Bus Operation or Function

NOTES: 1. The data output functions may be enabled or disabled by various signals at the xOEAB or xOEBA inputs. Data input functions are always enabled, i.e. data at the bus pins will be stored on every LOW-to-HIGH transition on the clocks inputs. 2. Select control = L: clocks can occur simultaneously. Select control = H: clocks must be staggered to load both registers. H = HIGH Voltage Level L = LOW Voltage Level X = Don't care = LOW-to-HIGH Transition


 

Related products with the same datasheet
IDT54FCT16652ATE
IDT54FCT16652ATEB
IDT54FCT16652ATPA
IDT54FCT16652ATPAB
IDT54FCT16652ATPF
IDT54FCT16652ATPFB
IDT54FCT16652ATPV
IDT54FCT16652CT
IDT54FCT16652CTE
IDT54FCT16652CTEB
IDT54FCT16652CTPA
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT54FCT16652CT Fast CMOS 16-bit Bus Transceiver/register
IDT54FCT16652ET
IDT54FCT16652T
IDT54FCT166H244ATE Fast CMOS 16-bit Buffer/line Driver
IDT54FCT166H244ATPB
IDT54FCT166H244ATPF
IDT54FCT166H245ATE Fast CMOS 16-bit Bidirectional Transceivers
IDT54FCT16823 Fast CMOS 18-bit Register
IDT54FCT16823AT

IDT54FCT162543TPF : Bus Oriented Circuits Fast CMOS 16-bit Latched Transceiver

IDT7133SA90J : Multi-Ports 2K X 16 Dual-port RAM

IDT72V235-20 : 3.3v CMOS Syncfifo (tm) 256x18; 512x18; 1,024x18; 2,048x18 And 4,096x18

QS3VH862 : Quickswitch Products 2.5V/3.3V 10-Bit High And Low Enable, High Bandwidth Bus Switch

IDT72V3612L20PF8 : 3.3v CMOS Syncbififo (tm) 64x36x2

IDT71V67803Z166BQG : 256K X 36 CACHE SRAM, 4.2 ns, PBGA119 Specifications: Memory Category: SRAM Chip ; Density: 9437 kbits ; Number of Words: 256 k ; Bits per Word: 36 bits ; Package Type: BGA, 14 X 22 MM, PLASTIC, BGA-119 ; Pins: 119 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 4.2 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT723611L20PQF9 : 64 X 36 OTHER FIFO, 10 ns, PQFP120 Specifications: Memory Category: FIFO ; Density: 2 kbits ; Number of Words: 64 k ; Bits per Word: 36 bits ; Package Type: TQFP, TQFP-120 ; Pins: 120 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 10 ns ; Cycle Time: 15 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT7285L20PAG : 8K X 9 BI-DIRECTIONAL FIFO, 12 ns, PDSO56 Specifications: Memory Category: FIFO ; Density: 74 kbits ; Number of Words: 8 k ; Bits per Word: 9 bits ; Package Type: TSSOP, GREEN, TSSOP-56 ; Pins: 56 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 12 ns ; Cycle Time: 20 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT72V51546L6BBG8 : 32K X 18 OTHER FIFO, 3.7 ns, PBGA256 Specifications: Memory Category: FIFO ; Density: 590 kbits ; Number of Words: 32 k ; Bits per Word: 18 bits ; Package Type: BGA, 17 X 17 MM, 1 MM PITCH, PLASTIC, BGA-256 ; Pins: 256 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 3.7 ns ; Cycle Time: 6 ns ; Operating Temperature: 0 to 70

IDT72V801L20TFG : 256 X 9 BI-DIRECTIONAL FIFO, 6.5 ns, PQFP64 Specifications: Memory Category: FIFO ; Density: 2 kbits ; Number of Words: 256 k ; Bits per Word: 9 bits ; Package Type: TQFP, PLASTIC, TQFP-64 ; Pins: 64 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 6.5 ns ; Cycle Time: 10 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT74FCT244CTQG8 : FCT SERIES, 8-BIT TRANSCEIVER, TRUE OUTPUT, PDSO20 Specifications: Technology: CMOS ; Device Type: Transceiver ; Supply Voltage: 5V ; Operating Temperature: 0 to 70 C (32 to 158 F) ; Package Type: SSOP, 5.30 MM, 0.65 MM PITCH, SSOP-20 ; Pins: 20

71V2556SA150BGGI : 128K X 36 ZBT SRAM, 5 ns, PBGA119 Specifications: Memory Category: SRAM Chip ; Density: 4719 kbits ; Number of Words: 128 k ; Bits per Word: 36 bits ; Package Type: BGA, GREEN, BGA-119 ; Pins: 119 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 5 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

 
0-C     D-L     M-R     S-Z