Details, datasheet, quote on part number: IDT54FCT16652T
CategoryLogic => Bus Interface => Bus Oriented Circuits
TitleBus Oriented Circuits
DescriptionFast CMOS 16-bit Bus Transceiver/register
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT54FCT16652T datasheet
Find where to buy


Features, Applications

MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tSK(o) (Output Skew) < 250ps Low input and output leakage 1µ A (max.) ESD > 2000V per MIL-STD-883, Method > 200V using machine model = 0) VCC 5V ±10% High drive outputs (-32mA IOH, 64mA IOL) Power off disable outputs permit "live insertion" Typical VOLP (Output Ground Bounce) 1.0V at VCC = 25°C Available in the following packages: Industrial: SSOP, TSSOP, TVSOP Military: CERPACK

The FCT16652T 16-bit registered transceivers are built using advanced dual metal CMOS technology. These high-speed, low-power devices are organized as two independent 8-bit bus transceivers with 3-state D-type registers. For example, the xOEAB and xOEBA signals control the transceiver functions. The xSAB and xSBA control pins are provided to select either real time or stored data transfer. The circuitry used for select control will eliminate the typical decoding glitch that occurs in a multiplexer during the transition between stored and real time data. A low input level selects real-time data and a high level selects stored data. Data on the or B data bus, or both, can be stored in the internal D-flipflops by low-to-high transitions at the appropriate clock pins (xCLKAB or xCLKBA), regardless of the select or enable control pins. Flow-through organization of signal pins simplifies layout. All inputs are designed with hysteresis for improved noise margin. The FCT16652T is ideally suited for driving high capacitance loads and low-impedance backplanes. The output buffers are designed with power off disable capability to allow "live insertion" of boards when used as backplane drivers.

Description Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Storage Temperature DC Output Current

NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. All device terminals except FCT162XXX Output and I/O terminals. 3. Output and I/O terminals for FCT162XXX.

Symbol CIN COUT Parameter(1) Input Capacitance Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 4.5 5.5 Max. 6 8 Unit pF

NOTE: 1. This parameter is measured at characterization but not tested.

Pin Names xAx xBx xCLKAB, xCLKBA xSAB, xSBA xOEAB, xOEBA Description Data Register A Inputs Data Register B Outputs Data Register B Inputs Data Register A Outputs Clock Pulse Inputs Output Data Source Select Inputs Output Enable Inputs

Inputs xOEAB xOEBA xCLKAB or L xCLKBA or L xSAB X X(2) xSBA X(2) xAx Input Unspecified(1) Output Input Output Data I/O(1) xBx Input Unspecified(1) Output Input Output Isolation Store A and B Data Store A, Hold B Store A in Both Registers Hold A, Store B Store B in both Registers Real Time B Data to A Bus Stored B Data to A Bus Real Time A Data to B Bus Stored A Data to B Bus Stored A Data to B Bus and Stored B Data to A Bus Operation or Function

NOTES: 1. The data output functions may be enabled or disabled by various signals at the xOEAB or xOEBA inputs. Data input functions are always enabled, i.e. data at the bus pins will be stored on every LOW-to-HIGH transition on the clocks inputs. 2. Select control = L: clocks can occur simultaneously. Select control = H: clocks must be staggered to load both registers. H = HIGH Voltage Level L = LOW Voltage Level X = Don't care = LOW-to-HIGH Transition


Related products with the same datasheet
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT54FCT16652TE Fast CMOS 16-bit Bus Transceiver/register
IDT54FCT166H244ATE Fast CMOS 16-bit Buffer/line Driver
IDT54FCT166H245ATE Fast CMOS 16-bit Bidirectional Transceivers
IDT54FCT16823 Fast CMOS 18-bit Register

IDT54FCT162374ETPF : Bus Oriented Circuits Fast CMOS 16-bit Register (3-state)

IDT54FCT241APB : Fast CMOS Octal Buffer/line Driver

IDT7203L40TPG : CMOS Asynchronous FIFO

IDT74FST1632861PVG : QUAD 2:1 Mux/demux BUS Switch

ICS387G-XX-LF : 200 MHz, OTHER CLOCK GENERATOR, PDSO16 Specifications: Device Type: Clock Generator ; Bus Interface: CMOS ; Package Type: Surface Mount, TSSOP, TSSOP-16 ; Supply Voltage: 3.13 to 5.5 volts ; Frequency: 50 MHz ; Operating Temperature: 0.0 to 70 C (32 to 158 F)

IDT72141L65J8 : 4K X 9 OTHER FIFO, PQCC32 Specifications: Memory Category: FIFO ; Density: 37 kbits ; Number of Words: 4 k ; Bits per Word: 9 bits ; Package Type: PLASTIC, LCC-32 ; Pins: 32 ; Logic Family: CMOS ; Supply Voltage: 5V ; Cycle Time: 40 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT72851L15TFI : 8K X 9 BI-DIRECTIONAL FIFO, 6.5 ns, PQFP64 Specifications: Memory Category: FIFO ; Density: 74 kbits ; Number of Words: 8 k ; Bits per Word: 9 bits ; Package Type: TQFP, TQFP-64 ; Pins: 64 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 6.5 ns ; Cycle Time: 10 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

7134SA25L48GI : IC,SRAM,4KX8,CMOS,DIP,48PIN,CERAMIC Specifications: Memory Category: SRAM Chip

71V3559S80BGI : IC,SYNC SRAM,256KX18,CMOS,BGA,119PIN,PLASTIC Specifications: Memory Category: SRAM Chip

7280L12PA8 : 256 X 9 BI-DIRECTIONAL FIFO, 12 ns, PDSO56 Specifications: Memory Category: FIFO ; Density: 2 kbits ; Number of Words: 256 k ; Bits per Word: 9 bits ; Package Type: TSSOP, TSSOP-56 ; Pins: 56 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 12 ns ; Cycle Time: 20 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

74FCT244TSOG : FCT SERIES, DUAL 4-BIT DRIVER, TRUE OUTPUT, PDSO20 Specifications: Technology: CMOS ; Device Type: Line / Bus Driver ; Supply Voltage: 5V ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Package Type: TSSOP, GREEN, TSSOP-20 ; Pins: 20 ; Features: RoHS

Same catergory

74AC377 : CMOS/BiCMOS->AC/ACT Family. Octal D-type Flip-flop With Clock Enable.

74F2245 : Bus Oriented Circuits. Octal Transceiver With 30 Ohms Equivalent Output Termination (3-state).

74F2620PCQR : Inverting Octal Bus Transceiver With 25 Series Resistors in The Output.

AVGDV74HCT573AD : Octal 3 State Noninverting Transparent Latch, Plastic Sop, Surface Mount.

FM24C02U/03U : 2k-bit Standard 2-wire Bus Interface Serial EePROM. The FM24C02U/03U devices are 2048 bits of CMOS non-volatile electrically erasable memory. These devices conform to all s in the Standard IIC 2-wire protocol. They are designed to minimize device pin count and simplify PC board layout requirements. The upper half (upper 1Kbit) of the memory of the FM24C03U can be write protected by connecting the WP pin to VCC.

GA1088 : 11-output Configurable Clock Buffer. Wide frequency range: 18 MHz to 105 MHz Output configurations: three outputs at 1/2 fREF three outputs at fREF four outputs at fREF with adjustable phase or two outputs at fREF four outputs at 2x fREF four outputs at 2x fREF with adjustable phase TriQuint's is a configurable clock buffer which generates 11 outputs, operating over a wide range of frequencies.


MC14562BCL : 128-bit Static Shift Register. The a 128­bit static shift register constructed with MOS P­channel and N­channel enhancement mode devices in a single monolithic structure. Data is clocked in and out of the shift register on the positive edge of the clock input. Data outputs are available every 16 bits, from 16 through bit 128. This complementary MOS shift register is primarily used.

MC74AC244DT : Buffers. Octal Buffer/line Driver With 3 State Outputs, Package: Tssop, Pins=20.

NL17SZ14XV5T2 : Single Inverter With Schmitt Trigger , Package: SOT-553, Pins=5. The is a single inverter with Schmitt trigger in two tiny footprint packages. The device performs much as LCX multi-gate products in speed and drive. Tiny SOT- 353 and SOT- 553 Packages Source/Sink 3.0 V Over-Voltage Tolerant Inputs and Outputs Pin For Pin with NC7SZ14 Designed for 5.5 V VCC Operation Chip Complexity: FET = 20 SOT-553 XV5 SUFFIX CASE.

SN54AHCT16540 : CMOS/BiCMOS->HC/HCT Family. 16-bit Buffer/driver With 3-state Outputs.

SN54S124J : Oscillators. ti SN54S124, Dual Voltage-controlled Oscillators.

SN74HC4075 : CMOS/BiCMOS->HC/HCT Family. Triple 3-input OR GATEs.

SN74S253N : Multiplexers. ti SN74S253, Dual 4-line to 1-line Data Selectors / Multiplexers.

TC4S71F : 4000-series Equiv. (TC4Sxx, TC4Wxx). Function = or ;; Package = SMV.

TC74HC125A : CMOS/BiCMOS->HC/HCT Family. Quad Bus Buffer.

PCK9448 : 3.3 V/2.5 V LVCMOS 1 : 12 clock fan-out buffer The PCK9448 is a 3.3 V or 2.5 V compatible, 1 : 12 clock fan-out buffer targeted for high performance clock tree applications. With output frequencies up to 350 MHz and output skews less than 150 ps, the device meets the needs of most demanding clock applications. The PCK9448 is specifically designed to distribute.

A2F200M3B-CS288YI : FPGA, 4608 CLBS, 200000 GATES, PBGA288. s: System Gates: 200000 ; Logic Cells / Logic Blocks: 4608 ; Package Type: Other, 0.50 MM PITCH, CSP-288 ; Logic Family: CMOS ; Pins: 288 ; Supply Voltage: 1.5V.

NC7SZ05CW : LVC/LCX/Z SERIES, 1-INPUT INVERT GATE, UUC4. s: Gate Type: NOT ; Output Type: Open Drain ; Logic Family: CMOS ; Inputs: 1 ; Pin Count: 4.

0-C     D-L     M-R     S-Z