Details, datasheet, quote on part number: IDT54FCT16823AT
PartIDT54FCT16823AT
CategoryLogic => Bus Interface => Bus Oriented Circuits
TitleBus Oriented Circuits
DescriptionFast CMOS 18-bit Register
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT54FCT16823AT datasheet
Quote
Find where to buy
 
  

 

Features, Applications

0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tSK(o) (Output Skew) < 250ps Low input and output leakage 1A (max.) VCC 10% High drive outputs (-32mA IOH, 64mA IOL) Power off disable outputs permit "live insertion" Typical VOLP (Output Ground Bounce) 1.0V at VCC = 25C Available in SSOP and TSSOP packages

The FCT16823T 18-bit bus interface registers are built using advanced, dual metal CMOS technology. These high-speed, low-power registers with clock enable (xCLKEN) and clear (xCLR) controls are ideal for parity bus interfacing in high-performance synchronous systems. The control inputs are organized to operate the device as two 9-bit registers or one 18-bit register. Flow-through organization of signal pins simplifies layout. All inputs are designed with hysteresis for improved noise margin. The FCT16823T is ideally suited for driving high-capacitance loads and low-impedance backplanes. The output buffers are designed with power off disable capability to allow "live insertion" of boards when used as backplane drivers.

The IDT logo is a registered trademark of Integrated Device Technology, Inc.

Symbol Description Terminal Voltage with Respect to GND Storage Temperature DC Output Current Max to +120 Unit C mA

NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. All device terminals except FCT162XXX Output and I/O terminals. 3. Output and I/O terminals for FCT162XXX.

Symbol CIN COUT Parameter(1) Input Capacitance Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 3.5 Max. 6 8 Unit pF

NOTE: 1. This parameter is measured at characterization but not tested.

Pin Names xDx xCLK xCLKEN xCLR x OE xQx Description Data Inputs Clock Inputs Clock Enable Inputs (Active LOW) Asynchronous Clear Inputs (Active LOW) Output Enable Inputs (Active LOW) 3-State Outputs

xOE xCLR Inputs xCLKEN xCLK X xDx Outputs xQx L Q(2) Function High Z Clear Hold Load

NOTES: H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care Z = High-Impedance 2. Output level before indicated steady-state input conditions were established.

Following Conditions Apply Unless Otherwise Specified: Industrial: to +85C, VCC 5.0V 10%

Symbol VIH VIL IIH IIL IOZH IOZL VIK IOS VH ICCL ICCH ICCZ Parameter Input HIGH Level Input LOW Level Input HIGH Current (Input pins)(5) Input HIGH Current (I/O pins)(5) Input LOW Current (Input pins)(5) Input LOW Current (I/O pins)(5) High Impedance Output Current (3-State Output pins)(5) Clamp Diode Voltage Short Circuit Current Input Hysteresis Quiescent Power Supply Current VCC = Max. VIN = GND or VCC = Min., IIN = 18mA VCC = Max., = GND(3) VCC = Max. VI = GND Test Conditions(1) Guaranteed Logic HIGH Level Guaranteed Logic LOW Level VCC = Max. VI = VCC Min. 80 Typ.(2) Max. mV A Unit V A

Symbol IO VOH Parameter Output Drive Current Output HIGH Voltage VCC = Min. VIN = VIH or VIL VOL IOFF Output LOW Voltage Input/Output Power Off Leakage(5) VCC = Min. VIN = VIH or VIL VCC = 0V, VIN 1 A

NOTES: 1. For conditions shown as Min. or Max., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC 5.0V, +25C ambient. 3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. 4. Duration of the condition can not exceed one second. 5. This test limit for this parameter = 55C.


 

Related products with the same datasheet
IDT54FCT16823ATE
IDT54FCT16823ATEB
IDT54FCT16823ATPA
IDT54FCT16823ATPAB
IDT54FCT16823ATPF
IDT54FCT16823ATPFB
IDT54FCT16823ATPV
IDT54FCT16823ATPVB
IDT54FCT16823BT
IDT54FCT16823BTE
IDT54FCT16823BTEB
IDT54FCT16823BTPA
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT54FCT16823ATE Fast CMOS 18-bit Register
IDT54FCT16827 Fast CMOS 20-bit Buffer
IDT54FCT16827AT
IDT54FCT16827ET Fast CMOS 20-bit Buffers
IDT54FCT16827ETE Fast CMOS 20-bit Buffer
IDT54FCT16841 Fast CMOS 20-bit Transparent Latch
IDT54FCT16841AT

5429FCT52ATSOB : Fast CMOS Octal Registered Transceivers

IDT7142SA100J : Multi-Ports 2K X 8 Dual-port RAM

IDT7200LA15TP : CMOS Asynchronous Fifo 256 X 9, 512 X 9, 1k X 9

IDT74FCT139TL : Fast Smos Dual 1-of-4 Decoder With Enable

IDT74FCT3574ASOB : 3.3V Octal D Register W/3-STATE Outputs

IDT71T75802S133BGI : 512K x 36, 1M x 18 2.5V Synchronous Zbt Srams 2.5V I/O, Burst Counter Pipelined Outputs

IDT74FCT162511CTPVG8 : CMOS/BiCMOS->FCT/FCT-T Family Fast CMOS 16-bit Buffer/line Driver

IDT72825LB25PF8 : 1K X 18 BI-DIRECTIONAL FIFO, 6.5 ns, PBGA121 Specifications: Memory Category: FIFO ; Density: 18 kbits ; Number of Words: 1 k ; Bits per Word: 18 bits ; Package Type: BGA, 16 X 16 MM, GREEN, PLASTIC, BGA-121 ; Pins: 121 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 6.5 ns ; Cycle Time: 10 ns ; Operating Temperature: 0 to 70 C (32 to

IDT74FCT257ATDC : FCT SERIES, 8-BIT REGISTERED TRANSCEIVER, TRUE OUTPUT, CQCC28 Specifications: Technology: CMOS ; Device Type: Transceiver ; Supply Voltage: 5V ; Operating Temperature: 0 to 70 C (32 to 158 F) ; Package Type: LCC-28 ; Pins: 28 ; Features: RoHS

IDT74FCT3573SOG8 : FCT SERIES, 10-BIT DRIVER, INVERTED OUTPUT, CQCC28 Specifications: Technology: CMOS ; Device Type: Line / Bus Driver ; Supply Voltage: 5V ; Operating Temperature: 0 to 70 C (32 to 158 F) ; Package Type: LCC-28 ; Pins: 28 ; Features: RoHS

71V424VS10YGI : 512K X 8 STANDARD SRAM, 10 ns, PDSO44 Specifications: Memory Category: SRAM Chip ; Density: 4194 kbits ; Number of Words: 512 k ; Bits per Word: 8 bits ; Package Type: TSOP, 0.400 INCH, ROHS COMPLIANT, TSOP2-44 ; Pins: 44 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 10 ns ; Operating Temperature: -40 to 85 C (-40 to 185 F)

74FCT163CTL : FCT SERIES, QUAD 4-BIT DRIVER, TRUE OUTPUT, PDSO48 Specifications: Technology: CMOS ; Device Type: Line / Bus Driver ; Supply Voltage: 3.3V ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Package Type: TSSOP, GREEN, TSSOP-48 ; Pins: 48 ; Features: RoHS

Same catergory

5962-8752501M2A : D-Type Flip-Flops. ti SN54ACT74, Dual Positive-edge-triggered D-type Flip-flops With Clear And Preset.

AVGDV74HC20D : Dual 4 Input NAND Gate, Plastic Sop, Surface Mount.

CD4009UB : CMOS/BiCMOS->4000 Family. CMOS Hex Buffers/converters. Data sheet acquired from Harris Semiconductor SCHS020B Revised February 2003 The CD4009UB and CD4010B types are supplied in 16-lead hermetic dual-in-line ceramic packages (F3A suffix), 16-lead dual-in-line plastic packages (E suffix), 16-lead small-outline packages (M, M96, and NSR suffixes), and 16-lead thin shink small-outline packages (PW and PWR suffixes).

CD54HC14 : CMOS/BiCMOS->HC/HCT Family. High Speed CMOS Logic Hex Inverting Schmitt Trigger.

HCF4089 : HCF->CMOS 4000B Series. Binary Rate Multiplier. CASCADABLE IN MULTIPLES OF 4-BITS SET TO "15" INPUT AND "15" DETECT OUTPUT QUIESCENT CURRENT SPECIFIED TO 20V STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS 5V, 10V AND 15V PARAMETRIC RATINGS INPUT LEAKAGE CURRENT = 100nA (MAX) AT VDD 25C 100% TESTED FOR QUIESCENT CURRENT MEETS ALL REQUIREMENTS OF JEDEC JESD13B "STANDARD S FOR OF B SERIES CMOS DEVICES".

IDT74FST3384 : Bus Oriented Circuits. 10-bit Bus Switch. Bus switches provide zero delay paths Extended commercial range to +85C Low switch on-resistance: 5 TTL-compatible input and output levels ESD > 2000V per MIL-STD-883, Method > 200V using machine model = 0) Available in QSOP, TSSOP, SOIC, and PDIP Packages The FST3384 belongs to IDT's family of Bus switches. Bus Switch devices perform the function.

IDTQS3VH800PA : 2.5V/3.3V 10-Bit High Bandwidth Bus Switch With Precharged Outputs. 3.3V 10-BIT HIGH BANDWIDTH BUS SWITCH WITH PRECHARGED OUTPUTS QUICKSWITCH PRODUCTS 3.3V 10-BIT HIGH BANDWIDTH BUS SWITCH WITH PRECHARGED OUTPUTS N channel FET switches with no parasitic diode to VCC Isolation under power-off conditions No DC path to VCC or GND 5V tolerant in OFF and ON state 5V tolerant I/Os B port precharged to user-selectable.

MC74HCT244A : Bus Oriented Circuits. Octal With 3-state Outputs Non-inverting Buffer/line Driver/line Receiver.

MC74VHC573DW : Octal 3-State Non-inverting D-type Type, Package: Soic, Pins=20. The is an advanced high speed CMOS octal latch with 3state output fabricated with silicon gate CMOS technology. It achieves high speed operation similar to equivalent Bipolar Schottky TTL while maintaining CMOS low power dissipation. This 8bit Dtype latch is controlled by a latch enable input and an output enable input. When the output enable input.

SN54122J : Monostable Multivibrators. ti SN54122, Retriggerable Monostable Multivibrators.

SN74BCT29834DW : Parity Transceivers. ti SN74BCT29834, 8-Bit to 9-Bit Parity Transceivers.

SN74HC377 : CMOS/BiCMOS->HC/HCT Family. Octal D-type Flip-flops With Clock Enable.

SN74LS592 : Bipolar->LS Family. Binary Counter With Input Registers.

TC74LCX138FN : TC74LCX Series. Function = 3-to-8 Line Decoder ;; Pins = 16 ;; Additional Information = More Info.

U74HC138G-P16-R : MULTIPLEXER AND DEMUX/DECODER. The U74HC138 decodes a three-bit Address to 1-of-8 active-low outputs. This device three Chip Select inputs, two active-low and one active-high, to facilitate the demultiplexing, cascading, and chip-selecting functions. The demultiplexing function is accomplished by using the address inputs to select the desired device output. One of the Chip Selects.

933715120652 : HCT SERIES, OTHER DECODER/DRIVER, TRUE OUTPUT, PDSO16. s: Function: Decoder ; Supply Voltage: 5V ; Package Type: SO-16 ; Logic Family: CMOS ; Number of Pins: 16 ; Propagation Delay: 53 ns ; Operating Temperature: -40 to 125 C (-40 to 257 F).

 
0-C     D-L     M-R     S-Z