|
Details, datasheet, quote on part number:ZT5515
| |
| Part: | ZT5515 |
| Category: | Communication => Others => Broadband & Access |
| Description: | Networking & Communications - Compute Boards & Platforms - CompactPCI* Processor Boards - Intel Netstructure ZT 5515 |
| Company: | Intel Corporation |
| Datasheet: | Download ZT5515 datasheet File size : 87 kB |
| Request For quote: | Find where to buy ZT5515
|
| |
Datasheet text preview:
Product Brief
Intel NetStructure ZT 5515 Compute Processor Board
® TM
Product Overview
This PICMG* 2.16-compliant, compute-centric processor board combines low price and performance with an optimized feature set to support a broad range of telecom and Internet applications. Modular and standards-based, the Intel® NetStructureTM ZT 5515 Compute Processor Board supports efficient time-tomarket development. It is validated with the Intel NetStructure family of Packet Switched Backplane (PSB) products, and is designed to be interoperable with third-party PICMG 2.16compliant components. The single-slot ZT 5515 processor board is
Product Highlights
Computing Core
I I
Mobile Intel Pentium 4 Processor M 400 MHz processor side bus and 512 KB L2 cache
Intel in Communications
Intelligent Peripheral Management Interface (IPMI)-based to increase management capabilities and reliability. Performance comes from the Mobile Intel® Pentium® 4 Processor M and Gigabit Ethernet channels. The PICMG 2.16 specification builds on existing standards, providing an economical, scalable path to the next-generation Internet and voice communications network. It is designed to accelerate the convergence of telecom and Internet IP-based applications including Web servers, mail servers, cache servers, VPN switches, media gateways, 2.5G and 3G wireless, server clusters, IP DSLAM and voice/video/data servers. The modular design simplifies development with standards-based modules, and backplane interconnect speeds are user-definable and scalable from 10 Mbps to 4 GB per node slot.
I
Supports 256 MB, 512 MB, 1 GB and 2 GB** ECC DDR SDRAM memory configurations
I
Intel® 845E chipset
**2 GB only achievable with 512 MB addressing
Peripherals and I/O
I
16 MB on-board flash memory to support embedded applications
I
Optional EIDE hard drive (up to 40 GB) or 32/33 PMC site
I I I I I
Dual GB Ethernet Front USB, serial, and Ethernet ports Optional CompactFlash* support Onboard video RAM options are Error-Correcting Code (ECC) DDR SDRAM (non-registered)
I
Optional Rear-Panel Transition board for additional I/O
Product Brief
Intel® NetStructureTM ZT 5515 Compute Processor Board
Key Design Elements
Interoperability The ZT 5515 processor board is designed to operate in a PICMG 2.16-compliant system such as the Intel® NetStructureTM ZT 5090 4U General Purpose Packet Switched Platform or ZT 5088 12U General Purpose Packet Switched Platform, both high-density computing platforms for carrier-grade telecom and Internet applications. It is also designed to interoperate with third-party Packet Switched Backplane (PSB) products. The ZT 5515 processor board features an integrated IPMI-based Baseboard Management Controller (BMC), compliant with the PICMG 2.9 System Management Specification. When used in a system with the Intel® NetStructureTM ZT 7102 Chassis Management Module (CMM), a comprehensive, protected lights-out management scheme can be achieved. Flash Memory and CompactFlash The ZT 5515 processor board includes 16 Mbytes on-board Intel StrataFlash® memory, which supports the field-upgradeable system BIOS, and may store a bootable operating system image. Additional CompactFlash memory capacity can be added with an optional CompactFlash carrier mezzanine card, available in lieu of a hard drive. This rugged, solid-state storage solution provides software compatibility with operating systems and applications supporting standard IDE devices. Ethernet Two GB Ethernet channels, provided via on-board 10/100/1000 Mbps Ethernet LAN interfaces, deliver high-speed networking performance and can be routed to the backplane through the BIOS setup configuration. Link and activity status LEDs indicate Ethernet operation. One of the two Ethernet channels is also available on the front panel. Watchdog Timer An on-board, two-stage watchdog timer enhances system reliability. Once enabled, failure to strobe the watchdog timer within a programmable time period (1s, 8s, 64s, 256s) generates a non-maskable interrupt (NMI or processor "INIT"), followed by a hardware reset. Software and Support The ZT 5515 processor board comes standard with an embedded BIOS loaded in on-board flash. The BIOS is user-configurable to boot an operating system residing in local flash memory, on a local hard drive, or over a network. The ZT 5515 processor board is PCcompatible and will run operating systems developed for the PC. Enhanced support is also provided for Windows* 2000 Server, Windows* .NET Server, MontaVista* Linux*, and VxWorks*, including additional drivers for select peripherals and flash drives.
Intel® NetStructureTM ZT 5515 Compute Processor Board - Block Diagram
Mobile Intel® Pentium® 4 Processor - M
Hz FS B
C ine z PM nn H aM ez 3 M 2/3 3
Ba
ck
pl
an
e
Intel® 845E North Bridge Intel® 82546 10/100/1000 Ether net
IP M B1 B0 Co IP M E tor ID ec nn l ne Pa 5) ar (J Re I/O r pe Su I/O
X BU S
40
0
M
Hu
bl
in
k
Vi de o
em st k or Sy loc rat Ce n Ge M RA ot SD Sl 6) R 6 D M2 D IM 0/ D0 (2
Intel® 845E South Bridge (ICH4)
LP C BU S
/O lI , ne OM t, Pa C ne ) t , 1 er ns on SB th tto Fr U E Bu ( 1 G B S, 1D LE
B a s e b o a rd Management Controller
B Ma t 16 tra sh S la F
Intel® NetStructureTM ZT 5515 Compute Processor Board
Product Brief
Specifications
The most current product specifications and order options are posted on the Web version of this data sheet: developer.intel.com/design/network/products/cbp/zt515.htm
The ZT 5515 Compute Processor Board is compliant with the following specifications:
I I
CompactPCI Core Specification, PICMG* 2.0 R3.0 CompactPCI Hot Swap Specification, PICMG 2.1 R2.0 I CompactPCI System Management, PICMG 2.9 R1.0 I CompactPCI Packet Switching Backplane Specification, PICMG 2.16 R1.0 I IPMI 1.5-compliant for standards-based management I Designed for NEBS 3
Power Req.
I
Typical
+5VDC +5%, -3% 22A +3.3VDC +5%, -3% 13A +12VDC ±10% 20mA
Supply Voltage, Vcc I Supply Current, Vcc=5.0VDC I Supply Voltage, V3.3V I Supply Current, V3.3V=3.3VDC I Supply Voltage, V12.0V I Supply Current, V12V=12.0V
Mechanical
I I
Measures 9.2" x 6.3" (233.35 mm x 160 mm) Width: 0.8" (1 slot - 4HP) I Connector: IEC-1076-4-101 (J1-J5)
Environmental
I I
Operating Temperature (requires 200 LFM airflow): 0° to 50° C Storage Temperature: (with hard disk) -40° to +65° C (without hard disk) -40° to +85° C I Non-Condensing Relative Humidity: less than 95% at 40° C
Peripherals and I/O Interfaces
I/O Interface I COM 1 I COM 2 I LPT 1 I VGA I Keyboard I Mouse I Floppy I EIDE I Ethernet A I Ethernet B I USB 0 I USB 1 Front Panel RJ-45 N/A N/A 15-pin D-shell N/A N/A N/A 2.5" RJ-45 N/A 4-pin USB N/A Rear Panel J5 J5 N/A J5 J5 J5 J5 J5 J3 J3 J5+ J5+ Compatibility 16550 16550 IEEE 1284 Standard PS/2-style PS/2-style PC/AT UltraDMA/100 Intel® 82546 Intel® 82546 USB Type A USB Type A
The ZT 5515 processor board may be configured with a companion rear-panel transition board. The Intel® NetStructureTM ZT 4807 Rear-Panel Transition Board is specifically designed to support the available I/O signals. + Custom configuration only.
|
|
