Details, datasheet, quote on part number: 5962F9666301VXC
CategoryCommunication and Interfaces => IC Interfaces => IC Interfaces => 8599065
CompanyIntersil Corporation
DatasheetDownload 5962F9666301VXC datasheet
Cross ref.Similar parts: AM26C31, AM26C31-EP, AM26C32, AM26C32-EP, AM26C32M, AM26LS31, AM26LS31M, AM26LS32A, AM26LS32AC, AM26LS32AM
Find where to buy
TechnologyRS422, CMOS
Device TypeLine / Bus Driver
Supply Voltage5V
Operating Temperature-55 to 125 C (-67 to 257 F)


Features, Applications

Radiation Hardened Quad Differential Line Driver

The Intersil is a quad differential line driver designed for digital data transmission over balanced lines and meets the requirements of EIA standard RS-422. Radiation hardened CMOS processing assures low power consumption, high speed, and reliable operation in the most severe radiation environments. The HS-26C31RH accepts CMOS signal levels and converts them to RS-422 compatible outputs. This circuit uses special outputs that enable the drivers to power down without loading down the bus. Enable and disable pins allow several devices to be connected to the same data source and addressed independently. Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). The SMD numbers listed here must be used when ordering. Detailed Electrical Specifications for these devices are contained in SMD 5962-96663. A "hot-link" is provided on our homepage for downloading.


Electrically Screened to SMD # 5962-96663 QML Qualified per MIL-PRF-38535 Requirements 1.2 Micron Radiation Hardened CMOS - Total Dose Up to. 300kRAD(Si) - Dose Rate Upset. > 1x109 RAD/s (20ns Pulse) Latchup Free EIA RS-422 Compatible Outputs (Except for IOS) CMOS Inputs High Impedance Outputs when Disabled or Powered Down Low Power Dissipation. 2.75mW Standby (Max) Single 5V Supply Low Output Impedance. 10 or Less Full to 125oC Military Temperature Range


CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 407-727-9207 | Copyright Intersil Corporation 1999

DIE DIMENSIONS: 96.5 mils x 195 mils x 21 mils x 4950) INTERFACE MATERIALS: Glassivation: Type: PSG (Phosphorus Silicon Glass) Thickness: 10k 1k Metallization: M1: Mo/TiW Thickness: 5800 M2: Al/Si/Cu (Top) Thickness: 10k 1k Substrate: AVLSI1RA Backside Finish: Silicon ASSEMBLY RELATED INFORMATION: Substrate Potential (Powered Up): VDD ADDITIONAL INFORMATION: Worst Case Current Density: x 105A/cm2 Bond Pad Size: x 100m

All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.

Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.

For information regarding Intersil Corporation and its products, see web site


Related products with the same datasheet
Some Part number from the same manufacture Intersil Corporation
5962F9666301VXX Specifications: Technology: RS422, CMOS ; Device Type: Line / Bus Driver ; Supply Voltage: 5V ; Operating Temperature: -55 to 125 C (-67 to 257 F) ; Package Type: DIP, SIDE BRAZED, CERAMIC, DIP-16 ; Pins:
5962F9853401VEC Specifications: Function: Decoder ; Package Type: DIP, SIDE BRAZED, CERAMIC, DIP-16 ; Logic Family: CMOS ; Number of Pins: 16 ; Propagation Delay: 15 ns ; Operating Temperature: -55 to 125 C (-67 to 257 F)
5962F9951101QXC Specifications: Driver Type: BUF OR INV BASED MOSFET DRIVER ; Output Current: 2 amps ; Supply Voltage: 12 to 18 volts ; Rise Time: 250 ns ; Fall Time: 250 ns ; Operating Temperature: -55 to 125 C (-67

ICL3245ECV-T : +/-15kV Esd Protected, +3V to +5.5V, 1 Microamp, 1Mbps, RS-232 Transceivers With Enhanced Automatic Powerdown

ISL21007CFB812Z : Precision, Low Noise FGA Voltage References The ISL21007 FGA voltage references are extremely low power, high precision, and low noise voltage references fabricated on Intersils proprietary Floating Gate Analog technology. The ISL21007 features very low noise (4μVP-P for 0.1Hz to 10Hz) and

X4283V8Z-2.7 : CPU Supervisor with 128K Eeprom

ISL9205CIRZ : Li-ion Battery Charger

KAD5514P-12Q72 : 14-bit, 250/210/170/125msps ADC

ISL3873AIK : Wireless LAN Integrated Medium Access Controller with Baseband Processor

ISL6741IBZ : Flexible Double Ended Voltage and Current Mode PWM Controllers

HIP2121 : 100V, 2A Peak, High Frequency Half-Bridge Drivers With Adjustable Dead Time Control And PWM Input The HIP2120 and HIP2121 are 100V, high frequency, half-bridge MOSFET driver ICs. They are based on the popular ISL2100A and ISL2101A half-bridge drivers. These drivers have a programmable dead-time

ICL3222CAZ-T : Interface - Drivers, Receivers, Transceiver Integrated Circuit (ics) Transceiver Tape & Reel (TR) 3 V ~ 5.5 V; IC 2DRVR/2RCVR RS232 3V 20-SSOP Specifications: Number of Drivers/Receivers: 2/2 ; Type: Transceiver ; Voltage - Supply: 3 V ~ 5.5 V ; Package / Case: 20-SSOP (0.209", 5.30mm Width) ; Packaging: Tape & Reel (TR) ; Protocol: RS232 ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ISL32498EIUZ-T7A : Interface - Drivers, Receivers, Transceiver Integrated Circuit (ics) Transceiver Tube 4.5 V ~ 5.5 V; IC TXRX RS485 FAULT PROT 8MSOP Specifications: Number of Drivers/Receivers: 1/1 ; Type: Transceiver ; Voltage - Supply: 4.5 V ~ 5.5 V ; Package / Case: 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) ; Packaging: Tube ; Protocol: RS422, RS485 ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

5962R9578501VXC : 3 TIMER(S), PROGRAMMABLE TIMER, CDIP24 Specifications: Bus Interface: CMOS ; Package Type: DIP, SIDE BRAZED, METAL SEALED, CERAMIC, DIP-24 ; Supply Voltage: 4.5 to 5.5 volts ; Operating Temperature: -55 to 125 C (-67 to 257 F)

0-C     D-L     M-R     S-Z