|Category||Analog & Mixed-Signal Processing => Analog Multipliers|
|Description||Wideband Two Quadrant Analog Multiplier ( Voltage Output )|
|Datasheet||Download HA2546883 datasheet
Wideband Two Quadrant Analog Multiplier (Voltage Output)
The is a monolithic, high speed, two quadrant, analog multiplier constructed in the Intersil Dielectrically Isolated High Frequency Process. The HA-2546/883 has a voltage output with a 30MHz signal bandwidth, 300V/µs slew rate and a 17MHz control input bandwidth. High bandwidth and slew rate make this part an ideal component for use in video systems. The suitability for precision video applications is demonstrated further by the 0.1dB gain flatness 5MHz, 1.6% multiplication error, -52dB feedthrough and differential inputs with 1.2µA bias currents. The HA-2546/883 also has low differential gain (0.1% typ.) and phase (0.1o typ.) errors. The HA-2546/883 is well suited for AGC circuits as well as mixer applications for sonar, radar, and medical imaging equipment. The voltage output of the HA-2546/883 simplifies many designs by eliminating the current-to-voltage conversion stage required for current output multipliers.Features
This Circuit is Processed in Accordance to MIL-STD883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1. High Speed Voltage Output. 300V/µs (Min) Low Multiplication Error.3.0% (Max) 1.6% (Typ) Input Bias Currents. 5µA (Max) 1.2µA (Typ) Signal Input Feedthrough. -52dB (Typ) Wide Signal Bandwidth. 30MHz (Typ) Wide Control Bandwidth. 17MHz (Typ) Gain Flatness 5MHz. 0.10dB (Typ)Applications
Military Avionics Missile Guidance Systems Medical Imaging Displays Video Mixers Sonar AGC Processors
PART NUMBER HA1-2546/883 HA4-2546/883 TEMPERATURE RANGE to +125oC PACKAGE 16 Lead CerDIP 20 Lead Ceramic LCCRadar Signal Conditioning Voltage Controlled Amplifier Vector Generator
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. http://www.intersil.com 407-727-9207 | Copyright © Intersil Corporation 1999
Voltage Between V+ and V-. 35V Differential Input Voltage. 6V Output Current. 60mA Junction Temperature. +175oC Storage Temperature Range. TA +150oC ESD Rating. <2000V Lead Temperature (Soldering 10s). +300oC
Thermal Resistance JA JC CerDIP Package. 80oC/W 25oC/W Ceramic LCC. 61oC/W 12oC/W Maximum Package Power Dissipation CerDIP Package +75oC. 1.25W Ceramic LCC Package +75oC. 1.64W Package Power Dissipation Derating Factor above +75oC CerDIP Package. 12mW/oC Ceramic LCC Package. 16mW/oC
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.Operating Temperature Range. to +125oC Operating Supply Voltage. to ±15V
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS Device Tested at: VSUPPLY = ±15V, RLOAD 1k , CLOAD = 50pF, Unless Otherwise Specified. GROUP A SUBGROU 2, 3 Scale Factor Error Common Mode Range SF +CMR -CMR Input Offset Voltage (VY) Input Bias Current (VY) Input Offset Current (VY) Common Mode (VY) Rejection Ratio VIO(VY) IB(VY) IIO(VY) +CMRR(VY) -CMRR(VY) Input Offset Voltage (VX) Input Bias Current (VX) Input Offset Current (VX) Input Offset Voltage (VZ) Output Voltage Swing VIO(VX) IB(VX) IIO(VX) VIO(VZ) +VOUT -VOUT Output Current +IOUT -IOUT VCM = 0V VCM = 0V VCM = +2V VCM = 0V VCM = 0V VCM = +2.5V LIMITS TEMPERATURE +125oC, -55oC
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued) Device Tested at: VSUPPLY = ±15V, RLOAD 1k , CLOAD = 50pF, Unless Otherwise Specified. GROUP A SUBGROU PS -ICC = 0V, IOUT 2, 3 LIMITS TEMPERATURE +125oC, -55oC MIN MAX -29 UNITS dB mA
TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS Table 2 Intentionally Left Blank. See AC Specifications in Table 3.
TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS Device Tested at: VSUPPLY = ±15V, RLOAD = 1k, CLOAD = 50pF, Unless Otherwise Specified. LIMITS PARAMETER Slew Rate SYMBOL +SR CONDITIONS VOUT = 2VDC VOUT = 2VDC VOUT = 2VDC VOUT = 2VDC VOUT = 2VDC VOUT = 2VDC VPEAK = 2VDC NOTES 1 -SR 1 Rise and Fall Time TR NOTES: 1. Parameters listed in Table 3 are controlled via design or process parameters and are not directly tested at final production. These parameters are lab characterized upon initial design release, or upon design changes. These parameters are guaranteed by characterization based upon data from multiple production runs which reflect lot to lot and within lot variation. 2. Full Power Bandwidth guarantee based on Slew Rate measurement using FPBW = Slew Rate/(2VPEAK). 3. Measured between 10% and 90% points. TABLE 4. ELECTRICAL TEST REQUIREMENTS MIL-STD-883 TEST REQUIREMENTS Interim Electrical Parameters (Pre Burn-in) Final Electrical Test Parameters Group A Test Requirements Groups C and D Endpoints NOTE: 1. PDA applies to Subgroup 1 only. SUBGROUPS (SEE TABLE 1 1(Note TEMPERATURE +125oC, -55oC
|Some Part number from the same manufacture Intersil Corporation|
|HA2556 Wideband Four Quadrant Analog Multiplier ( Voltage Output )|
|HA2556/883 Wideband Four Quadrant Analog Multiplier (voltage Output)|
|HA2556883 Wideband Four Quadrant Analog Multiplier ( Voltage Output )|
|HA2557 Wideband Four Quadrant Analog Multiplier ( Current Output )|
|HA2557/883 Wideband Four Quadrant Analog Multiplier (current Output)|
|HA2557883 Wideband Four Quadrant Analog Multiplier ( Current Output )|
|HA2841 Window Comparator With Independent Adjustments|
|HA3-2405-5 40MHz, Pram Four Channel Programmable Amplifiers|
|HA3-2425-5 3.2 Microsecond Sample And Hold Amplifiers|
|HA3-2444-5 50MHz, Selectable, Four Channel Video Operational Amplifier|
|HA3-2525-5 20MHz, High Slew Rate, Uncompensated, High Input Impedance, Operational Amplifiers|
|HA3-2539-5 600MHz, Very High Slew Rate Operational Amplifier|
|HA3-2540-5 400MHz, Fast Settling Operational Amplifier|
HCTS32K : Radiation Hardened Quad 2-input OR GATE
ISL21007BFB830 : Precision, Low Noise FGA?? Voltage References The ISL21007 FGA?? voltage references are extremely low power, high precision, and low noise voltage references fabricated on Intersil’s proprietary Floating Gate Analog technology. The ISL21007 features very low noise (4.5?VP-P for 0.1Hz to 10Hz) and v
ISL6336IRZ-T : 6-Phase PWM Controller With Light Load Efficiency Enhancement And Current Monitoring The ISL6336, ISL6336A controls microprocessor core voltage regulation by driving up to 6 interleaved synchronous-rectified buck channels in parallel. Multiphase buck converter architecture uses interleaved timing t
ISL54210IRUZ-T : MP3/USB 2.0 High Speed Switch With Negative Signal Handling/Click And Pop Suppression The Intersil ISL54210 dual SPDT (Single Pole/Double Throw) switch combines low distortion audio and accurate USB 2.0 high speed data (480Mbps) signal switching in the same low voltage device. When operated with a
EL5327CRZ-T13 : 2.5mhz 4, 8, 10 & 12 Channel Rail-to-rail Buffers
X5083S8Z-2.7 : CPU Supervisor with 8kbit SPI Eeprom
EL5192CW-T7A : 600mhz Current Feedback Amplifier with Enable
ISLA214P12 : High Performance 14-Bit, 125MSPS ADC The ISLA214P12 is a high performance 14-bit 125MSPS analog-to-digital converter offering very high dynamic range and low power consumption. It carries the export control classification number 3A991.c.3 and can be exported without a license to most countries, inc
ADM8695 : Power. Microprocessor Supervisory Circuit.
CA3420A : Single. 0.5MHz, Low Supply Voltage, Low Input Current Bimos Operational Amplifiers.
CD22M3493 : Multiplexers. 12 X 8 X 1 Bimos-e Crosspoint Switch. The Intersil is an array of 96 analog switches capable of handling signals from DC to video. Because of the switch structure, input signals may swing through the total supply voltage range, VDD to VSS. Each of the 96 switches may be addressed via the ADDRESS input to the to 96 line decoder. The state of the addressed switch is established by the signal.
ICL7611 : Single. 1.4MHz, Low Power CMOS Operational Amplifiers. The ICL761X/762X/764X series is a family of monolithic CMOS operational amplifiers. These devices provide the designer with high performance operation at low supply voltages and selectable quiescent currents, and are an ideal design tool when ultra low input current and low power dissipation are desired. The basic amplifier will operate at supply voltages.
KA22241 : Dual Equalizer Amp With Alc.
LB1272 : 6-unit, Darlington Transistor Array.
M5234 : Quad Comparator.
MAX4377TAUA : Single/dual/quad High-side Current-sense Amplifiers With Internal Gain.
MAX941 : High-Speed, Low-Power, 3V/5V, Rail-to-rail Single-supply Comparators. The MAX941/MAX942/MAX944 are single/dual/quad high-speed comparators optimized for systems powered from or 5V supply. These devices combine high speed, low power, and Rail-to-Rail ® inputs. Propagation delay is 80ns, while supply current is only 350µA per comparator. The input common-mode range of the MAX941/ MAX942/MAX944 extends beyond both power-supply.
SAA5254 : Integrated Vip And Teletext Decoder (ivt1.1x). Preliminary Supersedes data of July 1993 File under Integrated Circuits, IC02 1996 Nov 07 Complete teletext decoder including page memory and FASTEXT links a 40-pin DIP package Automatic processing of extension packet 26 for widest possible language decoding. All our standard language options can be available, and language option is readable via I2C-bus.
TC7652 : The TC7652 is a Lower Noise Version of The TC7650, Sacrificing Some Input s (bias Current And Bandwidth)to Achieve a 10x Reduction in Noise.
TL322CDR : ti TL322, Dual Low-power Operational Amplifier. Wide Range of Supply Voltages Single Supply. 30 V Dual Supplies. 15 V Class AB Output Stage True Differential Input Stage Low Input Bias Current Internal Frequency Compensation Short-Circuit Protection The TL322C and the TL322I are dual operational amplifiers similar in performance to the uA741 but with several distinct advantages. They are designed.
VFC121AP : ti VFC121, Precision Single Power Supply Voltage-to-frequency Converter.
X9241 : Quad 64 Tap Xdcp, Two-wire Interface Single Supply. Four potentiometers in one package 2-wire serial interface Register oriented format --Direct read/write/transfer of wiper positions --Store as many as four positions per potentiometer Terminal Voltages: ±5V Cascade resistor arrays Low power CMOS High Reliability --Endurance100,000 data changes per bit per register --Register data retention100 years.
MAX4162 : SOT23, Micropower, Single-Supply, Rail-to-Rail I/O Op Amps The MAX4162/MAX4163/MAX4164 are single/dual/quad, micropower operational amplifiers that combine an exceptional bandwidth to power consumption ratio with true rail-to-rail inputs and outputs. They consume a mere 25µA quiescent current per amplifier, yet achieve 200kHz gain-bandwidth product.