Details, datasheet, quote on part number: HA2556883
PartHA2556883
CategoryAnalog & Mixed-Signal Processing => Analog Multipliers
DescriptionWideband Four Quadrant Analog Multiplier ( Voltage Output )
CompanyIntersil Corporation
DatasheetDownload HA2556883 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Wideband Four Quadrant Analog Multiplier (Voltage Output)
Description

The is a monolithic, high speed, four quadrant, analog multiplier constructed in Intersil' Dielectrically Isolated High Frequency Process. The voltage output simplifies many designs by eliminating the current-to-voltage conversion stage required for current output multipliers. The HA-2556/883 provides a 450V/µs output slew rate and maintains 52MHz and 57MHz bandwidths for the X and Y channels respectively, making it an ideal part for use in video systems. The suitability for precision video applications is demonstrated further by the Y Channel 0.1dB gain flatness 5.0MHz, 1.5% multiplication error, -50dB feedthrough and differential inputs with 8µA bias current. The HA-2556 also has low differential gain (0.1%) and phase (0.1o) errors. The HA-2556/883 is well suited for AGC circuits as well as mixer applications for sonar, radar, and medical imaging equipment. The HA-2556/883 is not limited to multiplication applications only; frequency doubling, power detection, as well as many other configurations are possible.

Features

This Circuit is Processed in Accordance to MIL-STD883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1. High Speed Voltage Output. 450V/µs (Typ) Low Multiplication error. 1.5% (Typ) Input Bias Currents. 8µA (Typ) Signal Input Feedthrough. -50dB (Typ) Wide Y Channel Bandwidth. 57MHz (Typ) Wide X Channel Bandwidth. 52MHz (Typ) 0.1dB Gain Flatness (VY). 5.0MHz (Typ)

Applications

Military Avionics Missile Guidance Systems Medical Imaging Displays Video Mixers Sonar AGC Processors Radar Signal Conditioning Voltage Controlled Amplifier Vector Generator

PART NUMBER HA1-2556/883 TEMPERATURE RANGE to +125oC PACKAGE 16 Lead CerDIP

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. http://www.intersil.com 407-727-9207 | Copyright © Intersil Corporation 1999

Voltage Between V+ and V-. 35V Differential Input Voltage. 6V Output Current.±40mA ESD Rating. < 2000V Lead Temperature (Soldering 10s). +300oC Storage Temperature Range. TA +150oC Max Junction Temperature. +175oC

Thermal Resistance JA JC CerDIP Package. 82oC/W 27oC/W Maximum Package Power Dissipation at +75oC CerDIP Package. 1.22W Package Power Dissipation Derating Factor above +75oC CerDIP Package. 12mW/oC

CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

Operating Supply Voltage (±VS). ±15V Operating Temperature Range. TA +125oC

TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS Device Tested at: VSUPPLY = 20pF, Unless Otherwise Specified. GROUP A SUBGROUPS 2, 3 Linearity Error LE4V LE5V Input Offset Voltage (VX) VXIO VY, = ±4V VY, = ±5V Input Bias Current (VX) IB (VX) 2, 3 Input Offset Current (VX) IIO (VX) 2, 3 Common Mode (VX) Rejection Ratio Power Supply (VX) Rejection Ratio CMRR (VX) = 5V VCC = 5V VEE = ±5V Input Bias Current (VY) IB (VY) 2, 3 Input Offset Current (VY) IIO (VY) 2, 3 Common Mode (VY) Rejection Ratio Power Supply (VY) Rejection Ratio CMRR (VY) VYCM = 5V VCC = 5V VEE = 5V LIMITS TEMPERATURE +125oC, -55oC MIN MAX UNITS %FS µA dB

TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued) Device Tested at: VSUPPLY = 20pF, Unless Otherwise Specified. GROUP A SUBGROUPS 2, 3 Input Bias Current (VZ) IB (VZ) 2, 3 Input Offset Current (VZ) IIO (VZ) 2, 3 Common Mode (VZ) Rejection Ratio Power Supply (VZ) Rejection Ratio CMRR (VZ) = 0V VCC = 0V VEE = 0V VOUT 5V, RL -IOUT VOUT 5V, RL Output Voltage Swing +VOUT RL -VOUT RL Supply Current ±ICC VX, 2, 3 LIMITS TEMPERATURE +125oC, -55oC MIN MAX UNITS dB mA

TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS Table 2 Intentionally Left Blank. See AC Specifications in Table 3. TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS Device Tested: at VSUPPLY = 20pF, Unless Otherwise Specified. LIMITS PARAMETERS SYMBOL CONDITIONS NOTES TEMPERATURE MIN MAX UNITS

VY, VZ CHARACTERISTICS (NOTE 2) Bandwidth Gain Flatness AC Feedthrough BW(VY) GF(VY) VISO VX = Nulled = 200mV Step, to 90% pts 4.0 -45 MHz dB


 

Some Part number from the same manufacture Intersil Corporation
HA2557 Wideband Four Quadrant Analog Multiplier ( Current Output )
HA2557-9
HA2557/883 Wideband Four Quadrant Analog Multiplier (current Output)
HA2557883 Wideband Four Quadrant Analog Multiplier ( Current Output )
HA2841 Window Comparator With Independent Adjustments
HA3-2405-5 40MHz, Pram Four Channel Programmable Amplifiers
HA3-2406-5
HA3-2425-5 3.2 Microsecond Sample And Hold Amplifiers
HA3-2444-5 50MHz, Selectable, Four Channel Video Operational Amplifier
HA3-2505-5
HA3-2515-5
HA3-2525-5 20MHz, High Slew Rate, Uncompensated, High Input Impedance, Operational Amplifiers
HA3-2539-5 600MHz, Very High Slew Rate Operational Amplifier
HA3-2540-5 400MHz, Fast Settling Operational Amplifier
HA3-2542-5
HA3-2544C-5 50MHz, Video Operational Amplifier
HA3-2546-5 30MHz, Voltage Output, Two Quadrant Analog Multiplier
HA3-2556-9 57MHz, Wideband, Four Quadrant, Voltage Output Analog Multiplier
HA3-2605-5 12MHz, High Input Impedance Operational Amplifiers
HA3-2625-5 100MHz, High Input Impedance, Very Wideband, Uncompensated Operational Amplifiers
HA3-2839-5 600mhz, Very High Slew Rate Operational Amplifier

IH5142MJE883B : High-level CMOS Analog Switches

ISL5729/2IN : Dual 10-bit, +3.3V, 130/210+MSPS, Commlink High Speed D/A Converter

ISL12027IVZ-T PB FREE : Real Time Clock/Calendar with EEPROM The ISL12027 device is a low power real time clock with timing and crystal compensation, clock/calender, power-fail indicator, two periodic or polled alarms, intelligent battery backup switching, CPU Supervisor and integrated 512 x 8 bit EEPROM, in 16 Byte per p

ISL88002IE44Z-T : Ultra Low Power 3 Ld Voltage Supervisors In SC-70 And SOT-23 Packages The ISL88001, ISL88002, ISL88003 supervisors are extremely low power 160nA voltage supervisors that help to monitor the power supply voltages in a wide variety of applications. By providing Power-On Reset and supply voltage super

KAD5512HP-25 : 12-Bit, 250MSPS Single-Channel ADC, Programmable LVDS/LVCMOS Outputs The KAD5512HP is the high-performance member of the KAD5512 family of 12-bit analog-to-digital converters. Designed with Intersil’s proprietary FemtoCharge™ technology on a standard CMOS process, the family supports sampling rates

ISL7457SRHVF : Radiation Hardened, SEE Hardened, Non-Inverting, Quad CMOS Driver The ISL7457SRH is a radiation hardened, SEE hardened, high speed, non-inverting, quad CMOS driver. It is capable of running at clock rates up to 40MHz and features 2A typical peak drive capability and a nominal on-resistance of just

ISL6612ACRZ-T : Advanced Synchronous Rectified Buck Mosfet Drivers with Protection Features

X4043_06 : CPU Supervisor with 4kbit Eeprom

ICL7106CM44ZT : 3¨ö Digit, Lcd/led Display, A/D Converters

ISL23328WFVZ-T7A : Dual, 128-Tap, Low Voltage Digitally Controlled Potentiometer (XDCP™) The ISL23328 is a volatile, low voltage, low noise, low power, 128-Tap, dual digitally controlled potentiometer (DCP) with an I2C Bus™ interface. It integrates two DCP cores, wiper switches and control logic on a monolithic CMOS

Same catergory

2SC2578 : NPN Planar Silicon Transistor ( Audio Power Amplifier DC to DC Converter ).

AD8114 : Low Cost 225 MHZ 16 X 16 Crosspoint Switch, G=+1. 16 High-Speed Nonblocking Switch Arrays = +2 Serial or Parallel Programming of Switch Array Serial Data Out Allows "Daisy Chaining" of Multiple 16s to Create Larger Switch Arrays High Impedance Output Disable Allows Connection of Multiple Devices Without Loading the Output Bus For Smaller Arrays See Our (16 8) Switch Arrays Complete Solution Buffered.

FM-104PIN : Broadband Frequency Doubler, 150 - 3000 MHZ Output. Hermetic Flatpack Multioctave Frequency Coverage Conversion Loss: 10 dB Midband Impedance: 50 Ohms Nominal Maximum Input Power: 300 mW Max. MIL-STD-202 Screening Available A transmission line balun transformer connects to Schottky diodes arranged in a bridge configuration. This design allows balanced activation of all diodes, and yields excellent conversion.

HS9-2100RH : Radiation Hardened High Frequency Half Bridge Driver. Radiation Hardened High Frequency Half Bridge Driver The Radiation Hardened is a high frequency, 100V Half Bridge N-Channel MOSFET Driver IC, which is a functional, pin-to-pin replacement for the Intersil HIP2500 and the industry standard 2110 types. The low-side and high-side gate drivers are independently controlled. This gives the user maximum flexibility.

LDO513 : ip Library: Power Supply Range 2.9v to 13v, Low Power, 50ma Low Dropout Voltage Regulator.

LM224 : Quad Differential Input Operational Amplifiers. The LM324 series are low­cost, quad operational amplifiers with true differential inputs. They have several distinct advantages over standard operational amplifier types in single supply applications. The quad amplifier can operate at supply voltages as low or as high 32 V with quiescent currents about one­fifth of those associated with the MC1741 (on a per amplifier.

M62258FP : Power. General Purpose Battery Changer Control ic. The M62258FP is designed as general purpose battery charger control. The M62258FP has function which require for the batterycharge control on single chip. Not only the combination of M62258 and microcomputer capable of handing battery charge control, but also it is capable of monitoring battery temperature, prevent from over current or voltage, using.

MAX4781 : MAX4781, MAX4782, MAX4783 High-Speed, Low-Voltage, 1 CMOS Analog Switches/multiplexers.

NJM2136 : Ultra Wide Band,high Slew Rate Single Operational Amplifier. [CAUTION] The s on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. .

SAA7348GP : All Compact Disc Engine (ace). Preliminary File under Integrated Circuits, IC22 1997 Jul 11 CONTENTS GENERAL ORDERING INFORMATION QUICK REFERENCE DATA BLOCK DIAGRAM PINNING FUNCTIONAL Analog front-end Decoder front-end Servo front end Decoder functions Servo functions Signal conditioning Focus control Radial control Off-track counting Off-track detection Shock detection Defect detection.

TCM320AC36 : Voice-band Audio Processor Vbap(tm). Single 5-V Operation Low Power Consumption: ­ Operating Mode. 40 mW Typ ­ Standby Mode. 5 mW Typ ­ Power-Down Mode. 3 mW Typ Combined A/D, D/A, and Filters Extended Variable-Frequency Operation ­ Sample Rates to 16 kHz ­ Pass-Band to 7.2 kHz Electret Microphone Bias Reference Voltage Available Drive a Piezo Speaker Directly Compatible With All Digital.

XU308 : N-channel JFET High Frequency Amplifier. ABSOLUTE MAXIMUM RATINGS (TA = 25oC unless otherwise specified) Gate-Drain or Gate-Source Voltage. -25V Gate Current. 20mA Storage Temperature. to +200oC Operating Temperature Range. to +150oC Lead Temperature (Soldering, 10sec). +300oC Power Dissipation. 500mW Derate above 4mW/ oC NOTE: Stresses above those listed under "Absolute Maximum Ratings" may cause.

Z89332 : Digital Television Controller. Device Z89332 ROM (KW) 24 RAM* (Words) 640 PWM (8-Bit) 8 Voltage Range to 5.5V Fully Customized Character Set Character-Control and Closed-Caption Modes Keypad User Control TV Tuner Serial Interface Direct Video Signals Speed: 12 MHz 42-Pin SDIP and 48-Pin Ceramic Packages with to 48-Pin Adapter Socket to +70°C Temperature Range The Z89332 Digital Television.

HMC-C043 : GaAs MMIC I/Q MIXER MODULE 6 - 10 GHz The HMC-C043 is a passive I/Q MMIC mixer housed in a miniature hermetic module which can be used as either an Image Reject Mixer or a Single Sideband Upconverter. The module utilizes two standard Hittite double balanced mixer cells and a 90 degree hybrid fabricated on a GaAs MESFET process. A low frequency quadrature.

ST2349 : 2-bit dual supply level translator without control pin. 2-bit dual supply level translator without control pin 100 Mbps (typ.) data rate when driven by a totem pole driver 4 Mbps (typ.) data rate when driven by a Open Drain pole driver Bidirectional level translation, without direction pin Wide VL voltage range to 3.6V Wide VCC voltage range to 5.5V Power down mode feature ­ when either supply is off, all I/Os.

AD549 : Ultralow Input Bias Current Operational Amplifier The AD549* is a monolithic electrometer operational amplifier with very low input bias current. Input offset voltage and input offset voltage drift are laser trimmed for precision performance. The ultralow input current of the part is achieved with Topgate™ JFET technology, a process development exclusive.

 
0-C     D-L     M-R     S-Z