Details, datasheet, quote on part number: HA-2557/883
DescriptionWideband Four Quadrant Analog Multiplier (current Output)
CompanyIntersil Corporation
DatasheetDownload HA-2557/883 datasheet
Find where to buy


Features, Applications

Wideband Four Quadrant Analog Multiplier (Current Output)

The is a monolithic, high speed, four quadrant, analog multiplier constructed in Intersil' Dielectrically Isolated High Frequency Process. The single-ended current output of the HA-2557/883 has a 130MHz signal bandwidth (RL = 50). High bandwidth and low distortion make this part an ideal component in video systems. The suitability for precision video applications is demonstrated further by low multiplication error (1.5%), low feedthrough (-52dB), and differential inputs with low bias currents (8A). The HA-2557/883 is also well suited for mixer circuits as well as AGC applications for sonar, radar, and medical imaging equipment. The current output of the HA-2557/883 allows it to achieve higher bandwidths than voltage output multipliers. Full scale output current is trimmed 1.6mA. An internal 2500 feedback resistor is also provided to accurately convert the current, if desired, to a full scale output voltage of 4V. The HA-2557/883 is not limited to multiplication applications only; frequency doubling, power detection, as well as many other configurations are also possible.


This Circuit is Processed in Accordance to MIL-STD883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1. Low Multiplication Error. 1.5% (Typ) Input Bias Currents. 8A (Typ) Signal Input Feedthrough 5MHz. -52dB (Typ) Wide Y Channel Bandwidth. 130MHz (Typ) Wide X Channel Bandwidth. 75MHz (Typ) Rise Time (RL 50). 7ns (Typ) Supply Current. 17mA (Max)


Military Avionics Missile Guidance Systems Medical Imaging Displays Video Mixers Sonar AGC Processors Radar Signal Conditioning Voltage Controlled Amplifier Vector Generator


CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 407-727-9207 | Copyright Intersil Corporation 1999

Voltage Between V+ and V-. 35V Differential Input Voltage. 6V Output Current. 3mA ESD Rating. < 2000V Lead Temperature (Soldering 10s). +300oC Storage Temperature Range. TA +150oC Max Junction Temperature. +175oC

Thermal Resistance JA JC CerDIP Package. 82oC/W 27oC/W Maximum Package Power Dissipation at +75oC CerDIP Package. 1.22W Package Power Dissipation Derating Factor above +75oC CerDIP Package. 12mW/oC

CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

Operating Supply Voltage (VS). 15V Operating Temperature Range. TA +125oC

TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS Device Tested at: VSUPPLY 15V, RZ (Pin 10) not connected, Unless Otherwise Specified. PARAMETERS Multiplication Error SYMBOL ME CONDITIONS VY, = 1.6mA VY, = 4V Nominal 2500 VX, = 4V VXCM = 4V VYCM = 4V VX, = 0V VOUT = 10V GROUP A SUBGROUPS IOUT Offset Input Offset Voltage (VX) Input Bias Current (VX) Input Offset Current (VX) Common Mode (VX) Rejection Ratio Power Supply (VX) Rejection Ratio IOO VXIO IB(VX) IIO(VX) CMRR(VX) + PSRR(VX) - PSRR(VX) Input Offset Voltage (VY) Input Bias Current (VY) Input Offset Current (VY) Common Mode (VY) Rejection Ratio Power Supply (VY) Rejection Ratio VYIO IB(VY) IIO(VY) CMRR(VY) + PSRR(VY) - PSRR(VY) Supply Current ICC ZOUT Output Impedance 1 LIMITS TEMPERATURE -55 C

Table 2 Intentionally Left Blank. See AC Specifications in Table 3

TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS Device Tested at: VSUPPLY 15V, RZ (Pin 10) not connected, Unless Otherwise Specified. LIMITS PARAMETERS VY, CHARACTERISTICS Bandwidth AC Feedthrough BW(VY) VISO VX = Nulled to +4V Step to 90% pts to +4V Step 90 -48 MHz dB SYMBOL CONDITIONS NOTES TEMPERATURE MIN MAX UNITS

Overshoot Differential Input Resistance VX CHARACTERISTICS Bandwidth AC Feedthrough
Rise and Fall Time Overshoot Differential Input Resistance NOTE:

1. Parameters listed in Table 3 are controlled via design or process parameters and are not directly tested at final production. These parameters are lab characterized upon initial design release, or upon design changes. These parameters are guaranteed by characterization based upon data from multiple production runs which reflect lot to lot and within lot variation. 2. Offset voltage applied to minimize feedthrough signal. TABLE 4. ELECTRICAL TEST REQUIREMENTS MIL-STD-883 TEST REQUIREMENTS Interim Electrical Parameters (Pre Burn-In) Final Electrical Test Parameters Group A Test Requirements Groups C and D Endpoints NOTE: 1. PDA applies to Subgroup 1 only. SUBGROUPS (SEE TABLE 1) 1 (Note


Related products with the same datasheet
Some Part number from the same manufacture Intersil Corporation
82C59A_06 CMOS Priority Interrupt Controller
HI5741BIBZ 14-bit, 100msps, High Speed D/A Converter
EL5302IUZ 400mhz Slew Enhanced VFAs
631Z White LED Boost Regulator With Integrated Schottky Diode
X9421WS-2.7 Single Digitally Controlled (xdcp) Potentiometer
IS9-139ASRH/PROTO Single Event Radiation Hardened Quad Voltage Comparator
X60250V8IZ Micro Power Programmable Voltage Reference
X4323V8-2.7 CPU Supervisor with 32k Eeprom
ISL5416EVAL Four-channel Wideband Programmable Downconverter
EL2150CS-T13 125mhz Single Supply, Clamping Op Amps
HA-5020_06 100mhz Current Feedback Video Amplifier With Disable
EL7535IY Monolithic 350ma Step-down Regulator
AD7541_02 12-bit, Multiplying D/A Converter
ICL7115 14-bit High-speed CMOS Up-compatible A/D Converter
MR82C88/B CMOS Bus Controller
X9315TMIZ Low Noise, Low Power, 32 Taps
HC55180_05 Extended Reach Ringing SLIC Family
IS9-1825ASRH/PROTO Single Event Radiation Hardened High Speed, Current Mode PWM
HA-5170_00 2mhz, Ultra-low Offset Voltage Operational Amplifier
CD4504 CMOS Hex Voltage Level Shifter for Ttl-to-cmos or Cmos-to-cmos Operation
ISL9103 500ma 4.3mhz Low IQ High Efficiency Synchronous Buck Converter

CD4069UBMS : Space Applications Radiation Hardened CMOS Hex Inverter

EL2244CN : op Amp, Dual 120MHz, Unity-gain Stable, Low Power 5.2mA, Dual or Single Supply (36V)

FRF9250H : 14a, -200v, 0.315 Ohm, Rad Hard, P-channel Power MOSFETs

HI9P0506-9 : Multiplexers Single 16 And 8/Differential 8-Channel And 4-Channel CMOS Analog Multiplexers

X9401WS24-2.7 : Low Noise/low Power/spi Bus

X1205V8T1 : 2-wire RTC Real Time Clock/calendar

ISL61853OIRZ-T : Dual USB Port Power Supply Controller The ISL6185XXC Is A Family Of 2.5V To 5V Dual Integrated FET Hot Swap Devices Covering The Commercial 0C To +70C Temperature Range The ISL6185 USB power controller family provides fully independent overcurrent (OC) fault protection for two or more USB ports.

X9268TS24 : Dual Digitally-controlled Potentiometers

ISL84467IVZ : Interface - Analog Switches, Multiplexers, Demultiplexer Integrated Circuit (ics); IC SWITCH QUAD SPDT 16TSSOP Specifications: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ISL74422ARHF/PROTO : 9 A BUF OR INV BASED MOSFET DRIVER, CDFP16 Specifications: Driver Type: BUF OR INV BASED MOSFET DRIVER ; Output Current: 9 amps ; Supply Voltage: 7 to 18 volts ; Rise Time: 50 ns ; Fall Time: 75 ns ; Operating Temperature: -55 to 125 C (-67 to 257 F) ; Package Type: ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, DFP-16 ; Production Status: Full-P

5962F1222801VXC : OP-AMP Specifications: Device Type: Operational Amplifiers

0-C     D-L     M-R     S-Z