Details, datasheet, quote on part number: HA3-5114-5
PartHA3-5114-5
CategoryAnalog & Mixed-Signal Processing => Amplifiers
DescriptionDual And Quad, 8mhz And 60mhz, Low Noise Operational Amplifiers
CompanyIntersil Corporation
DatasheetDownload HA3-5114-5 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Low noise and high performance are key words describing HA-5102, HA-5104 and HA-5114. These general purpose amplifiers offer an array of dynamic specifications ranging from a 3V/s slew rate and 8MHz bandwidth to 20V/s slew rate and 60MHz gain-bandwidth-product (HA-5114). Complementing these outstanding parameters is a very low noise specification at 1kHz. Fabricated using the Intersil high frequency DI process, these operational amplifiers also offer excellent input specifications such a 0.5mV offset voltage and 30nA offset current. Complementing these specifications are 108dB open loop gain and 60dB channel separation. Consuming a very modest amount of power (90mW/ package for duals and 150mW/package for quads), HA5102/04/14 also provide 15mA of output current. This impressive combination of features make this series of amplifiers ideally suited for designs ranging from audio amplifiers and active filters to the most demanding signal conditioning and instrumentation circuits. These operational amplifiers are available in dual or quad form with industry standard pinouts allowing for immediate interchangeability with most other dual and quad operational amplifiers. HA-5102 HA-5114 Dual, Comp. HA-5104 Quad, Uncomp. Quad, Comp.

Features

Low Noise. 4.3nV/Hz Bandwidth. 8MHz (Compensated) 60MHz (Uncompensated) Slew Rate. 3V/s (Compensated) 20V/s (Uncompensated) Low Offset Voltage. 0.5mV Available in Duals or Quads

Applications

High Q, Active Filters Audio Amplifiers Instrumentation Amplifiers Integrators Signal Generators For Further Design Ideas, See Application Note AN554

PART NUMBER HA3-5114-5 HA9P5114-9 TEMP. RANGE (oC) to 85 PACKAGE 8 Ld PDIP 8 Ld CERDIP 14 Ld CERDIP 14 Ld CERDIP 14 Ld PDIP 16 Ld SOIC 14 Ld PDIP 16 Ld SOIC PKG. E14.3 M16.3

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 321-724-7143 | Copyright Intersil Corporation 1999

Supply Voltage Between V+ and V- Terminals. 40V Differential Input Voltage. 7V Input Voltage. VSUPPLY Output Short Circuit Duration (Note 3). Indefinite

Thermal Resistance (Typical, Note 2) JA (oC/W) JC (oC/W) 8 Lead PDIP Package. 92 N/A 8 Lead CERDIP Package. 50 14 Lead CERDIP Package. 30 14 Lead PDIP Package. 86 N/A SOIC Package HA-5114). 96 N/A Maximum Junction Temperature (Note 1, Hermetic Package).175oC Maximum Junction Temperature (Plastic Package).150oC Maximum Storage Temperature Range. to 150oC Maximum Lead Temperature (Soldering 10s). 300oC (SOIC - Lead Tips Only)

CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

NOTES: 1. Maximum power dissipation, including output load, must be designed to maintain the maximum junction temperature below 175oC for hermetic packages, and below 150oC for plastic packages. JA is measured with the component mounted on an evaluation PC board in free air. 3. Any one amplifier may be shorted to ground indefinitely.

Offset Voltage Average Drift Bias Current

Input Resistance Common Mode Range TRANSFER CHARACTERISTICS Large Signal Voltage Gain, (VOUT = 2k) Common Mode Rejection Ratio (VCM = 5.0V) Small Signal Bandwidth, HA-5102/5104 (AV = 1) Gain Bandwidth Product, HA-5114 (AV = 10) Channel Separation (Note 4) OUTPUT CHARACTERISTICS Output Voltage Swing (RL = 10k) (RL = 2k) Output Current, (VOUT = 5V) Full Power Bandwidth (Note HA-5102/5104 HA-5114

VSUPPLY = 15V, Unless Otherwise Specified (Continued) HA-5102-2, -5 MIN TYP 110 MAX HA-5114 -5 MIN TYP 110 MAX MIN HA-5104-9 HA-5114-9 TYP 110 MAX UNITS

PARAMETER Output Resistance STABILITY Minimum Stable Closed Loop Gain HA-5102/5104 HA-5114

POWER SUPPLY CHARACTERISTICS Supply Current (All Amps) Power Supply Rejection Ratio, (VS = 5V) NOTES: 4. Channel separation value is referred to the input of the amplifier. Input test conditions are: = 10kHz; VIN = 1k. Slew Rate 5. Full power bandwidth is guaranteed by equation: Full power bandwidth 2 V PEAK 6. Refer to Test Circuits section of the data sheet. 7. Settling time is measured 0.1% of final value for a 1V input step, and = -10 for HA-5114, and a 10V input step, = -1 for HA-5102/5104. 8. The limits for these parameters are guaranteed based on lab characterization, and reflect lot-to-lot variation. 25 Full mA dB


 

Some Part number from the same manufacture Intersil Corporation
HA3-5142-5 Dual, 400kHz, Ultra-low Power Operational Amplifier
HA3-5320-5 Microsecond Precision Sample And Hold Amplifier Amplifier
HA3-5330-5 650ns Precision Sample And Hold Amplifier
HA3-5340-5 700ns, Low Distortion, Precision Sample And Hold Amplifier
HA4-2522/883
HA4-2546883 Wideband Two Quadrant Analog Multiplier ( Voltage Output )
HA4-4741/883 Quad Operational Amplifier
HA4-5002/883 Monolithic, Wideband, High Slew Rate, High Output Current Buffer
HA4-5020883 100mhz Current Feedback Video Amplifier With Disable
HA4-5104883 Low Noise, High Performance, Quad Operational Amplifier
HA4-5112883 Dual, Low Noise, High Performance Uncompensated Operational Amplifier
HA4-5114
HA4-5114883 Quad, Low Noise, High Performance Uncompensated Operational Amplifier
HA4-5137883 60mhz, Ultra Low Noise, Precision Operational Amplifier
HA4-5177/883 Ultra Low Offset Voltage Operational Amplifier
HA4-5177883
HA4-5320883 High Speed Precision Sample And Hold Amplifier
HA4-5340883 High Speed, Low Distortion, Precision Monolithic Sample And Hold Amplifier
HA4201 480MHz, 1 X 1 Video Crosspoint Switch With Tally Output
HA4244 480mhz, 1x1 Video Crosspoint Switch With Synchronous Enable
HA4314B 400MHz, 4 X 1 Video Crosspoint Switch

EL2082CN : Current Mode Multiplier

EL5123 : Buffer, Quad 12MHz, Rail-to-rail Input-Output, 600A

EL5292CY : op Amp, Dual 600MHz, Current Feedback

HIN208ACA-T : +5v Powered Rs-232 Transmitters/receivers With 0.1microfarad External Capacitors

KAD2708C : 8-bit, 350/275/210/170/105msps A/D Converter

ISL95310UIU10Z : Terminal Voltage 0V to 13.2v, 128 Taps I2C Interface

ISL6273IRZ-T : 1.2A Low Quiescent Current 1.5mhz High Efficiency Synchronous Buck Regulator

ISL78214ARZ : 4A Low Quiescent Current High Efficiency Synchronous Buck Regulator The ISL78214 is a high efficiency, monolithic, synchronous step-down DC/DC converter that can deliver up to 4A continuous output current from a 2.8V to 5.5V input supply. It uses a current control architecture to deliver very low d

ISL6363 : Multiphase PWM Regulator For VR12 Desktop CPUs Fully compliant with VR12 specifications, the ISL6363 provides a complete solution for microprocessor core and graphics power supplies. It provides two Voltage Regulators (VRs) with three integrated gate drivers. The first output (VR1) can be configu

ISL9103IRUBZ-T : Pmic - Voltage Regulator - Dc Dc Switching Regulator Integrated Circuit (ics) Step-Down (Buck) Yes 1.5V; IC BUCK SYNC 1.5V 0.5A 6UTDFN Specifications: Type: Step-Down (Buck) ; Output Type: Fixed ; PWM Type: Current Mode ; Synchronous Rectifier: Yes ; Number of Outputs: 1 ; Voltage - Output: 1.5V ; Current - Output: 500mA ; Frequency - Switching: 2.4MHz ; Voltage - Input: 2.7 V ~ 6 V ; Lead Free Status: Lead Free ; RoHS Status: RoHS

HS2-117EH-Q : ADJUSTABLE POSITIVE REGULATOR Specifications: Regulator Type: Standard ; Output Polarity: Positive ; Output Voltage Type: Adjustable / Variable ; Life Cycle Stage: ACTIVE

X9251UV24-2.7T1 : QUAD 50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 256 POSITIONS, PDSO24 Specifications: Category / Application: General Use ; Mounting / Packaging: Surface Mount Technology (SMT / SMD), 4.40 MM, TSSOP-24 ; Operating Temperature: 0 to 70 C (32 to 158 F)

Same catergory

2SD1412A : NPN Triple Diffused Type ( High Current Switching, Power Amplifier Applications ).

AD630 : Balanced Modulator/demodulator. Recovers Signal from +100 dB Noise 2 MHz Channel Bandwidth V/ s Slew Rate 120 dB Crosstalk @ 1 kHz Pin Programmable Closed Loop Gains of 1 and 2 0.05% Closed Loop Gain Accuracy and Match 100 V Channel Offset Voltage (AD630BD) 350 kHz Full Power Bandwidth Chips Available 2.5k RINA 1 CHA+ 2 CHA 20 2.5k RINB 17 CHB+ 18 CHB 19 V AMP B The is a high.

CLC446 : 400mhz, 50mw Current-feedback op Amp. The National is a very high speed unity-gain-stable current-feedback op amp that is designed to deliver the highest levels of performance from a mere 50mW quiescent power. It provides a very wide 400MHz bandwidth, a 2000V/s slew rate and 900ps rise/fall times. The CLC446 achieves its superior speed-vs-power using an advanced complementary bipolar IC process.

HSP45314 : Commlinktm Direct Digital Synthesizer. IGNS PR at TITU ME EC Sheet NO Data See ical Sup tersil.co OS n Tech ww.i t our SIL 8 1-88 125MSPS Output Sample Rate with 5V Digital Supply 100MSPS Output Sample Rate with 3.3V Digital Supply 14-bit DAC with Internal Reference Parallel Control Interface for Fast Tuning (50MSPS Control Register Write Rate) 48-bit Programmable Frequency Control Small.

IMP809 : Power. 3-pin Microcontroller Power Supply Supervisor. The IMP809/IMP810 are 3.0V, 3.3V and 5.0V power supply supervisor circuits optimized for low-power microprocessor (P), microcontroller (C) and digital systems. The IMP809/810 are improved drop-in replacements for the Maxim MAX809/810 and feature 60% lower supply current. A reset signal is issued if the power supply voltage drops below a preset reset.

MAX291C/D : 8th-order, Lowpass, Switched-capacitor Filters.

MC100LE310 : Low Voltage 2:8 Differential Fanout Buffer. The is a low voltage, low skew 2:8 differential ECL fanout buffer designed with clock distribution in mind. The device fully differential clock paths to minimize both device and system skew. The LVE310 offers two selectable clock inputs to allow for redundant or test clocks to be incorporated into the system clock trees. The MC100E310 is pin compatible.

OP-32 : High-speed ( Avcl => 10 ) Programmable Micropower Operational Amplifier.

OPA2132P : ti OPA2132, High Speed Fet-input Operational Amplifiers. q FET INPUT: = 50pA max q WIDE BANDWIDTH: 8MHz q HIGH SLEW RATE: 20V/s q LOW NOISE: (1kHz) q LOW DISTORTION: 0.00008% q HIGH OPEN-LOOP GAIN: 130dB (600 load) q WIDE SUPPLY RANGE: 18V q LOW OFFSET VOLTAGE: 500V max q SINGLE, DUAL, AND QUAD VERSIONS Offset Trim In +In V 8-Pin DIP, SO-8 OPA132 Offset Trim V+ Output NC The OPA132 series of FET-input.

STK4201V : af Power Amplifier (60W + 60W). STK4201V AF Power Amplifier (Split Power Supply) + 60W min, THD = 0.08%) The STK4201II series (THD=0.4%), STK4201V series (THD=0.08%) and STK4141X series (THD=0.02%) are pin-compatible. Once the PCB pattern is designed, you can easily satisfy the requirements for new sets simply by changing the IC. Built-in muting circuit to cut off various kinds of pop noise.

TIM5053-30L : Microwave Power GAAS Fet. MICROWAVE POWER GaAs FET Low Distortion Internally Matched Power GaAs FETs (C-Band) Low intermodulation distortion = -45 dBc = 34.5 dBm, - Single carrier level High power = 45 dBm at 5.0 GHz to 5.3 GHz High gain at 5.0 GHz to 5.3 GHz Broad band internally matched Hermetically sealed package RF Performance s (Ta 25 C) Characteristics Output Power at 1dB Compression.

TK11070 : Negative Slope Temperature Sensor ic. Linear Output Voltage -8 mV/C Output Active High On/Off Control 10.0 V Supply Range Miniature Package (SOT-23-5) Minimum External Parts Count Low Power Consumption APPLICATIONS Home and Industrial Thermostats Automotive Climate Control Battery Charger Temperature Monitor Notebook Computer Temperature Monitor Electronic Thermometers Fish Finder Water.

TLE2024AMDW : Excalibur High-speed Low-power Precision Operational Amplifiers. TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS Supply Current. 230 A Max High Unity-Gain Bandwidth. 2 MHz Typ High Slew Rate. 0.45 V/s Min Supply-Current Change Over Military Temp Range. 10 A Typ at VCC V Specified for Both 5-V Single-Supply and 15-V Operation Phase-Reversal Protection High Open-Loop Gain. 6.5 V/V.

TLE2061A : . TLE206xB, TLE206xY EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE POWER OPERATIONAL AMPLIFIERS 2 Bandwidth (2 MHz) of the TL06x and TL03x Operational Amplifiers Low Supply Current. 290 A/Ch Typ On-chip Offset Voltage Trimming for Improved DC Performance High Output Drive, Specified into 100- Loads Lower Noise Floor Than Earlier Generations of Low-Power BiFETs.

TPA0223DGQ : ti TPA0223, 2-W Mono Audio Power Amp With Headphone Drive. TPA0223 2-W MONO AUDIO POWER AMPLIFIER WITH HEADPHONE DRIVE Other Small Portable Audio Devices 2 W Into 4- From 5-V Supply 0.6 W Into 4- From 3-V Supply Stereo Head Phone Drive Separate Inputs for the Mono (BTL) Signal and Stereo (SE) Left/Right Signals Wide Power Supply Compatibility 5 V Meets PC99 Desktop Specs (Target) Low Supply Current 11 mA Typical.

X96011 : Temperature Sensor With Look up Table Memory And DACs. Temperature Sensor with Look Up Table Memory and DAC Single Programmable Current Generator --1.6 mA max. --8-bit (256 Step) Resolution --Internally Programmable full scale Current Outputs Integrated 8-bit A/D Converter Internal Voltage Reference Temperature Compensation --Internal Sensor to +100C Range --2.2C / step resolution --EEPROM Look-up Table.

SZP-2026 : Sirenza Microdevices SZP-2026Z is a high linearity single stage class AB Heterojunction Bipolar Transistor (HBT) amplifier housed in a proprietary surface-mountable plastic encapsulated package. This HBT amplifier is made with InGaP on GaAs device technology and fabricated with MOCVD for an ideal combination of low cost and high reliability..

BUF08821 : Programmable Gamma-Voltage Generator And Vcom Calibrator With Integrated Two-Bank Memory The BUF08821 offers eight programmable gamma channels plus one programmable VCOM channel. The final gamma and VCOM values can be stored in the on-chip, nonvolatile memory. To allow for programming errors or liquid crystal display (LCD) panel rework, the BUF08821.

NJM2744 : High Speed Single Supply Quad Operational Amplifier The NJM2744 is a high-speed single supply quad operational amplifier. The low VOL enables to treat small output signal on a single supply. It has wide supply voltage range, +3V to +32V and high slew rate. The NJM2744 is suitable for power supply and motor driver units..

 
0-C     D-L     M-R     S-Z