Details, datasheet, quote on part number: HA4-5104/883
Description100mhz, Ultra Low Noise, Precision, High Slew Rate Operational Amplifier
CompanyIntersil Corporation
DatasheetDownload HA4-5104/883 datasheet
Find where to buy


Features, Applications

100MHz, Ultra Low Noise, Precision, High Slew Rate Operational Amplifier

The HA-5147/883 monolithic operational amplifier features an unparalleled combination of precision DC and wideband high speed characteristics. Utilizing the Intersil DI technology and advanced processing techniques, this unique design unites low noise precision instrumentation performance with high speed wideband capability. This amplifier's impressive list of features include low VOS, wide gain-bandwidth, high open loop gain, and high CMRR. Additionally, this flexible device operates over a wide supply range while consuming only 120mW of power. Using the HA-5147/883 allows designers to minimize errors while maximizing speed and bandwidth in applications requiring gains greater than ten. This device is ideally suited for low level transducer signal amplifier circuits. Other applications which can utilize the HA-5147/883's qualities include instrumentation amplifiers, pulse or RF amplifiers, audio preamplifiers, and signal conditioning circuits.


This Circuit is Processed in Accordance to MIL-STD883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1. High Slew Rate. 28V/s (Min) Wide Gain Bandwidth (AV 10). 100MHz (Min) Low Noise (at 1kHz). 4.5nV/Hz (Max) Low Offset Voltage.100V (Max) Low Offset Drift With Temperature. 1.8V/oC (Max) High CMRR. 100dB (Min) High Voltage Gain. 700kV/V (Min)


High Speed Signal Conditioners Wide Bandwidth Instrumentation Amplifiers Low Level Transducer Amplifiers Fast, Low Level Voltage Comparators Highest Quality Audio Preamplifiers Pulse/RF Amplifiers

PART NUMBER HA4-5147/883 HA7-5147/883 TEMP. RANGE (oC) to 125 PACKAGE 20 Ld CLCC 8 Ld CERDIP PKG. NO. J20.A F8.3A

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 321-724-7143 | Copyright Intersil Corporation 1999

Voltage Between V+ and V- Terminals. 44V Differential Input Voltage (Note 1). 0.7V Voltage at Either Input Terminal. V+ to VInput Current. 25mA Output Current. Full Short Circuit Protection ESD Rating. <2000V

Thermal Resistance (Typical, Note 2) JA (oC/W) JC (oC/W) CERDIP Package. 115 28 CLCC Package. 65 15 Package Power Dissipation Limit at 75oC for TJ 175oC CERDIP Package. 870mW CLCC Package. 1.54W Package Power Dissipation Derating Factor Above 75oC CERDIP Package. 8.7mW/oC CLCC Package. 15.4mW/oC Maximum Junction Temperature (TJ). 175oC Maximum Storage Temperature to 150oC Maximum Lead Temperature (Soldering 10s). 300oC

CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

NOTES: 1. For differential input voltages greater than 0.7V, the input current must be limited 25mA to protect the back-to-back input diodes. JA is measured with the component mounted on an evaluation PC board in free air. TABLE 1. DC ELECTRICAL PERFORMANCE SPECIFICATIONS Device Tested at: VSUPPLY = 15V, RSOURCE = 50, RLOAD = 100k, VOUT = 0V, Unless Otherwise Specified. PARAMETER Input Offset Voltage SYMBOL VIO CONDITIONS VCM = 0V GROUP A SUBGROUPS 2, 3 Input Bias Current IB VCM 50 +I Input Offset Current IIO VCM = 0V, +RS = 10k, -RS = -4.7V VOUT = 0V and = 2k VOUT = 0V and = 2k VCM = +11V VCM = +10V -CMRR VCM = -11V VCM -10V nA kV/V 2, 3 TEMP. (oC) MIN -100 -300 MAX UNITS V nA

TABLE 1. DC ELECTRICAL PERFORMANCE SPECIFICATIONS (Continued) Device Tested at: VSUPPLY = 15V, RSOURCE = 50, RLOAD = 100k, VOUT = 0V, Unless Otherwise Specified. PARAMETER Output Voltage Swing SYMBOL +VOUT1 CONDITIONS = 2k GROUP A SUBGROUPS +VOUT2 -VOUT2 Output Current +IOUT -IOUT Quiescent Power Supply Current +ICC = 600 VOUT = -10V VOUT = +10V VOUT = 0V, IOUT = 0mA -ICC VOUT = 0V, IOUT 2, 3 Power Supply Rejection Ratio +PSRR VSUP = +14V VSUP = +13.5V -PSRR VSUP = +14V VSUP = +13.5V Offset Voltage Adjustment +VIOAdj Note -VIOAdj Note NOTE: 3. Offset adjustment range is [VIO (Measured) 1mV] minimum referred to output. This test is for functionality only to assure adjustment through 0V. TABLE 2. AC ELECTRICAL PERFORMANCE SPECIFICATIONS Device Tested at: VSUPPLY = 15V, RSOURCE = 50, RLOAD = 2k, CLOAD = 50pF, AVCL = +10V/V, Unless Otherwise Specified. PARAMETER Slew Rate SYMBOL +SR -SR Rise and Fall Time tr tf Overshoot +OS -OS CONDITIONS VOUT to +3V VOUT to -3V VOUT tr 90% VOUT tf 90% VOUT to +200mV VOUT to -200mV GROUP A SUBGROUPS TEMP. (oC) MIN 28 MAX UNITS ns % TEMP. (oC) MIN VIO-1 VIO+1 MAX UNITS dB mV


Related products with the same datasheet
Some Part number from the same manufacture Intersil Corporation
HA4-5114/883 100mhz, Ultra Low Noise, Precision, High Slew Rate Operational Amplifier
HI7106_02 3 1/2 Digit, Lcd/led Display, A/D Converter
ISL8701AIBZ Adjustable Quad Sequencer
ISL6173 Dual Low Voltage Hot Swap Controller
ISL9014 Dual LDO with Low Noise, Low IQ, and High PSRR
X80203V20I Power Supply Swquencer with Power-up System Mnitoring
EL5306IS 350mhz Fixed Gain Amplifiers with Enable
4015B CMOS Dual 4-stage Static Shift Register With Serial Input/parallel Output
LMP2015 High Precision, Rail-to-rail Output Operational Amplifier
PX3511B Advanced Synchronous Rectified Buck Mosfet Drivers with Protection Features
ISL6741IBZ Flexible Double Ended Voltage and Current Mode PWM Controllers
5102IS 400mhz Slew Enhanced VFAs
ISL6721ABZ Flexible Single Ended Current Mode PWM Controller
DG434 2 Channel Drivers WITH SPST AND DPST FET Switches
ISL41387 15kv ESD Protected, 5V, Dual Protocol (rs-232/rs-485) Transceivers
HS9-9008RH/PROTO Radiation Hardened CMOS 8-bit Flash Analog-to-digital Converter
EL4583_06 Sync Separator, 50% Slice, S-H, Filter, HOUT
X5169PZ CPU Supervisor with 16kbit SPI Eeprom
CD4085 CMOS Dual 2 Wide 2 Input And-or-invert Gate
ISL81483IBZ 15kv ESD Protected, 1/8 Unit Load, 5V, Low Power, High Speed or Slew Rate Limited, Rs-485/rs-422 Transceivers

HS0-4424RH-Q : Dual FET Radiation Hardened Dual, Non-inverting Power MOSFET Drivers

ISK6522CR : Desktop Buck And Synchronous Rectifier Pulse-width Modulator (PWM) Controller

ISL6523 : Desktop VRM8.5 Dual PWM And Dual Linear Power System Controller

RFP22N10 : 22a, 100v, 0.080 Ohms, N-channel Power MOSFETs

ISL80101 : High Performance 1A LDO The ISL80101 ia a low-voltage, high-current, single output LDO specified for 1A output current. This part operates from input voltages of 2.2V to 6V and is capable of providing output voltages of 0.8V to 5V on the adjustable VOUT versions. Fixed output voltage options availa

IS82C50A-5Z : CMOS Asynchronous

RURG3040 : 30A, 400V - 600V Ultrafast Dual Diodes

EL8188IW-T7A : Micropower Single Supply Rail-to-rail Input-output Precision Op Amp

5962R9672301QCX : 4000/14000/40000 SERIES, DUAL MONOSTABLE MULTIVIBRATOR, CDFP16 Specifications: Supply Voltage: 5V ; Features: Complementary Output ; Package Type: Other, CERAMIC, FP-16 ; Logic Family: CMOS ; Number of Pins: 16 ; Propagation Delay: 810 ns ; Operating Temperature: -55 to 125 C (-67 to 257 F)

0-C     D-L     M-R     S-Z