Details, datasheet, quote on part number: HA4314B
PartHA4314B
CategoryCommunication => Network => Switches => Digital Crosspoint Switches
Description400MHz, 4 X 1 Video Crosspoint Switch
CompanyIntersil Corporation
DatasheetDownload HA4314B datasheet
Quote
Find where to buy
 
  

 

Features, Applications

The is a very wide bandwidth x 1 crosspoint switch ideal for professional video switching, HDTV, computer monitor routing, and other high performance applications. The circuit features very low power dissipation (105mW Enabled, 4mW Disabled), excellent differential gain and phase, and very high off isolation. When disabled, the output is switched to a high impedance state, making the HA4314B ideal for routing matrix equipment. The HA4314B requires no external current source, and features fast switching and symmetric slew rates. For crosspoint with Tally outputs (channel indicators) or with synchronous control signals, please refer to the HA4404B and HA4344B data sheets, respectively. For audio channels requiring larger signal swings, please refer to the x 8) data sheet.

Features

Low Power Dissipation. 105mW Symmetrical Slew Rates. 1400V/s 0.1dB Gain Flatness. 100MHz -3dB Bandwidth. 400MHz Off Isolation (100MHz). 70dB Crosstalk Rejection (30MHz). 80dB Differential Gain and Phase. 0.01%/0.01 Degrees High ESD Rating. >2000V TTL Compatible Control Inputs Improved Replacement for GX4314 and GX4314L

Applications

Professional Video Switching and Routing HDTV Computer Graphics RF Switching and Routing PCM Data Routing

TEMP. PART NUMBER RANGE (oC) to 70 PACKAGE 14 Ld PDIP 14 Ld SOIC Tape and Reel 16 Ld SSOP PKG. NO. M14.15 M16.15A

NOTE: These pins must be left floating or connected to ground.

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2002. All Rights Reserved

Voltage Between V+ and V-. 12V Input Voltage. VSUPPLY Digital Input Current (Note 2). 25mA Analog Input Current (Note 2). 5mA Output Current. 20mA ESD Rating Human Body Model (Per MIL-STD-883 Method 3015.7).2000V

PDIP Package. 95 SOIC Package. 120 SSOP Package. 140 Maximum Junction Temperature (Die). 175oC Maximum Junction Temperature (Plastic Package). 150oC Maximum Storage Temperature Range. to 150oC Maximum Lead Temperature (Soldering 10s). 300oC (SOIC and SSOP - Lead Tips Only)

CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

NOTES: JA is measured with the component mounted on a low effective thermal conductivity test board in free air. See Tech Brief TB379 for details. If an input signal is applied before the supplies are powered up, the input current must be limited to these maximum values.

VSUPPLY = 10k, VCS = 0.8V, Unless Otherwise Specified TEST CONDITIONS (NOTE 4) TEMP. (oC) Full VCS = 0.8V VCS = 0.8V VCS = 2.0V VCS = 2.0V Full 25 Full 4V 1VP-P Full 25 Full = 49pF MIN TYP MAX UNITS A mV V/oC A dB MHz

DC SUPPLY CHARACTERISTICS Supply Voltage Supply Current (VOUT = 0V)

ANALOG DC CHARACTERISTICS Output Voltage Swing without Clipping Output Current Input Bias Current Output Offset Voltage Output Offset Voltage Drift (Note 3) SWITCHING CHARACTERISTICS Turn-On Time Turn-Off Time Output Glitch During Switching DIGITAL DC CHARACTERISTICS Input Logic High Voltage Input Logic Low Voltage Input Current AC CHARACTERISTICS Insertion Loss Channel-to-Channel Insertion Loss Match -3dB Bandwidth VOUT = VIN VIO 20mV

PARAMETER 0.1dB Flat Bandwidth VSUPPLY = 10k, VCS = 0.8V, Unless Otherwise Specified (Continued) TEST CONDITIONS = 49pF Input Resistance Input Capacitance Enabled Output Resistance Disabled Output Capacitance Differential Gain Differential Phase Off Isolation Crosstalk Rejection Slew Rate (1.5VP-P, +SR/-SR) VCS 2.0V 4.43MHz, Note 3 4.43MHz, Note 1VP-P, 100MHz, VCS = 49pF Total Harmonic Distortion Disabled Output Resistance NOTES: 3. This parameter is not tested. The limits are guaranteed based on lab characterization, and reflect lot-to-lot variation. 4. Units are 100% tested at 25oC; Guaranteed but not tested at 0oC and = 1k, Note 3 VCS = 2.0V (NOTE 4) TEMP. (oC) Full 25 Full MIN 200 TYP MAX 0.02 0.1 UNITS MHz pF % Degrees dB V/s % M

Keep input and output traces as short as possible, because trace inductance and capacitance can easily become the performance limiting items.

The frequency response of this circuit depends greatly on the care taken in designing the PC board. The use of low inductance components such as chip resistors and chip capacitors is strongly recommended, while a solid ground plane is a must! Attention should be given to decoupling the power supplies. A large value (10F) tantalum in parallel with a small value (0.1F) chip capacitor works well in most cases.

The HA4314B is crosspoint switch that is ideal for the matrix element of high performance switchers and routers. This crosspoint's low input capacitance and high input resistance provide excellent video terminations when used with an external 75 resistor. Nevertheless, if several HA4314B inputs are connected together, the use of an input buffer should be considered (see Figure 1). This crosspoint contains no feedback or gain setting resistors, so the output is a true high impedance load when the IC is disabled (CS = 1).

All GND pins are connected to a common point on the die, so any one of them will suffice as the functional GND connection. For the best isolation and crosstalk rejection, however, all GND pins must connect to the GND plane.

Most applications utilizing the HA4314B require a series output resistor, RS, to tune the response for the specific load


 

Related products with the same datasheet
HA4314BCA
HA4314BCA96
HA4314BCB
HA4314BCB96
HA4314BCP
Some Part number from the same manufacture Intersil Corporation
HA4314BCA 400MHz, 4 X 1 Video Crosspoint Switch
HA4344B 350MHz, 4 X 1 Video Crosspoint Switch With Synchronous Controls
HA4404B 330MHz, 4 X 1 Video Crosspoint Switch With Tally Outputs
HA456 120MHz, Low Power, 8 X 8 Video Crosspoint Switch
HA457 95MHz, Low Power, av = 2, 8 X 8 Video Crosspoint Switch
HA4600 480MHz, Video Buffer With Output Disable
HA4905 Window Comparator With Independent Adjustments
HA4P2425-5 3.2 Microsecond Sample And Hold Amplifiers
HA4P5002-5 110MHz, High Slew Rate, High Output Current Buffer
HA4P5033-5 250MHz Video Buffer
HA5002
HA5002-2
HA5002-5
HA5002-9
HA5004
HA5013 Triple, 125MHz Video Amplifier
HA5022 Dual, 125MHz, Video Current Feedback Amplifier With Disable
HA5022/883 Dual 100MHz Video Current Feedback Amplifier With Disable
HA5022IB
HA5023 Dual 125MHz Video Current Feedback Amplifier
HA5023/883 Dual 100MHz Video Current Feedback Amplifier

FSYA450R3 : Radiation Hardened, Segr Resistant N-channel Power MOSFETs

ISL6844IU : Improved Industry Standard Single-ended Current Mode PWM Controller. UVLO=7.0 V; Dmax=100%The ISL6840, ISL6841, ISL6842, ISL6843, ISL6844, ISL6845 Family of Adjustable Frequency, Low Power, Pulse Width Modulating (PWM) Current Mode Controllers is Designed For a Wide Range of Power Conversion A

ISL9016IRUWJZ-T : 150mA Dual LDO With Low Noise, High PSRR, And Low IQ ISL9016 is a high performance dual LDO capable of providing up to 150mA current on each channel. It features a low standby current and very high PSRR and is stable with output capacitance of 1?F to 4.7?F with an ESR of up to 200m?. The device

ISL9205DIRZ : Li-ion Battery Charger

ICL8023MJE : High Reliability Low Power Bipolar Operational Amplifier

X1288S16-4.5AT1 : Clock/timing - Real Time Clock Integrated Circuit (ics) Clock/Calendar Tape & Reel (TR) 4.5 V ~ 5.5 V; IC RTC/CAL/CPU SUP EE 16-SOIC Specifications: Date Format: YY-MM-DD-dd ; Time Format: HH MM SS hh (12/24 hr) ; Voltage - Supply: 4.5 V ~ 5.5 V ; Interface: I²C ; Memory Size: - ; Package / Case: 16-SOIC (0.295", 7.50mm Width) ; Packaging: Tape & Reel (TR) ; Type: Clock/Calendar ; Operating Temperature: 0C ~ 70C ;

X5329P : CPU Supervisor with 32kbit SPI Eeprom

ISL28117FBZ : OP-AMP, 110 uV OFFSET-MAX, 1.5 MHz BAND WIDTH, PDSO8 Specifications: Supply Voltage (VS): 5 volts ; IBIAS: 0.0015 µA ; CMRR: 145 dB ; Slew Rate: 0.5000 V/µs ; Operating Temperature: -40 to 125 C (-40 to 257 F) ; Package Type: SOIC, ROHS COMPLIANT, PLASTIC, MS-012, SOIC-8 ; Number of Pins: 8 ; Number of Devices: 1

Same catergory

A3210-LH : Micropower, Ultra-sensitive Hall-effect Switches. The A3209Ex and A3210Ex integrated circuits are ultra-sensitive, pole independent Hall-effect switches with a latched digital output. They are especially suited for operation in battery-operated, hand-held equipment such as cellular and cordless telephones, pagers, and palmtop computers. 2.5 volt to 3.5 volt operation and a unique clocking scheme to reduce.

AD1845 : Parallel-port 16-Bit Soundport Stereo Codec. Single-Chip Integrated Digital Audio Stereo Codec Microsoft* and Windows* Sound System Compatible MPC Level-2+ Compliant Mixing 16 mA Bus Drive Capability Supports Two DMA Channels for Full Duplex Operation On-Chip Capture and Playback FIFOs Advanced Power-Down Modes Programmable Gain and Attenuation Sample Rates from 4.0 kHz to 50 kHz Derived from.

AT90SC9608RC : Secure Microcontrollers. Low-power, High Performance 8-bit/16-bit Secure Microcontroller With 96K Byte ROM, 8K Byte EePROM..

HFBR-5103 : Fast Ethernet. 125 MBD Atm And Fast Ethernet Transceiver in Low Cost 1x9 Package: SC Receptacle.

HFBR1456C : Low Cost, Miniature Fiber Optic Components With St, Sma, SC And FC Ports.

IDT72V8980 : 3.3v Time Slot Interchange Digital Switch 256 X 256. 3.3 VOLT TIME SLOT INTERCHANGE DIGITAL SWITCH x 256 x 256 channel non-blocking switch Serial Telecom Bus Compatible (ST-BUS) RX inputs--32 channels at 64 Kbit/s per serial line TX output--32 channels at 64 Kbit/s per serial line Three-state serial outputs Microprocessor Interface (8-bit data bus) 3.3V Power Supply Available in 44-pin Plastic Leaded.

IXF30009 : Broadband & Access. Networking & Communications - Optical Products & Technologies - Optical Components - Intel IXF30009 Optical Transport Processor.

LC7185-8750 : CB Tranceiver PLL Frequency Synthesizer And Controller.

MAX3970EVKIT : MAX3970EVKIT Evaluation Kit For The MAX3970. The MAX3970 evaluation kit (EV kit) is a fully assembled chip-on-board electrical demonstration kit that provides easy evaluation of the 10.3Gbps, +3.3V transimpedance amplifier. Note that the MAX3970 EV kit provides an electrical interface to the IC, which is similar to, but not exactly the same as, a photodiode. The circuit used tends to increase.

MB15F74UL : PLL Frequency Synthesizer With Internal Prescaler. The Fujitsu is a serial input Phase Locked Loop (PLL) frequency synthesizer with a 4000 MHz and a 2000 MHz prescalers. a 128/129 for the 4000 MHz prescaler, and a 64/65 for the 2000 MHz prescaler can be selected for the prescaler that enables pulse swallow operation. The BiCMOS process is used, as a result a supply current is typically 3.0 V. The supply.

MIC94001 : P-channel MOSFET. The is a silicon gate P-channel MOSFET designed for low on-resistance, high-side switch applications. The MIC94001 has a maximum on-resistance at 4.5V gate-to-source voltage. Improved ESD protection is provided by the gate protection network shown in the schematic diagram. The MIC94001 is supplied in a low-profile version of the 8-lead SOIC package.

ML7036 : Echo CANceller With Dual Codecs For Hands-free.

S1M8833 : = S1M8833 Fractional-n Rf/integer-n if Dual PLL ;; = 1.65GHz Fractional-n RF/520MHz Integer-n if Frequency Synthesizer ;; Package = 24QFN ;; Production Status = Mass Production.

SE4100L : Pointcharger GPS Receiver ic Preliminary Information. Applications Mobile phone & PDA accessories Portable navigation Personal security Security systems Asset tracking Telematics equipment The is an integrated GPS receiver designed to receive the L1 signal at 1575.42MHz. The receiver has a low IF architecture, and integrates all of the amplifier, oscillator, mixer and demodulation functions. The external.

SP37E760 : 3.3V Super I/o Controller For Embedded Applications.

SY89420V : Dual Phase-locked Loop W/frequency Doubler Mode. s 3.3V and 5V power supply options s 1.12GHz maximum VCO frequency to 560MHz reference input operating frequency s Frequency doubler mode s Low jitter design s PECL differential outputs s PECL and TTL reference voltages available s External loop filter optimizes performance/cost s Available in 28-pin PLCC package The SY89420V device consists of two identical,.

TLIU04C1 : TLIU04C1 Quad T1/E1 Line Interface. Transmitter includes transmit encoder or HDB3), pulse shaping, and line driver. Five pulse equalization settings for template compliance at DSX cross connect. Receive includes equalization, digital clock and data recovery (immune to false lock), and receive decoder HDB3). CEPT/E1 interference immunity as required by G.703. Transmit jitter <0.02 UI. Receive.

TNETA1560 : Thundercell(tm). Main Interfaces Architecture Data Structures Functional Overview Registers Peripheral Devices Local Slave Bus 8 EPROM SBus Control RAM Local Memory Bus 32 The SBus SAR is an SBus device that provides an asynchronous transfer mode (ATM) Interface. Single-chip segmentation and reassembly (SAR) for fullduplex ATM adaptation layer (AAL) processing. .

 
0-C     D-L     M-R     S-Z