LOW POWER CONSUMPTION. IDEAL FOR BACKLIGHTING. RoHS COMPLIANT.
The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode.
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice.
Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AA1114/2YC/CC YELLOW (GaAsP/GaP) WATER CLEAR 4 Typ. 10 Viewing Angle 21/2 120°
Note: 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Symbol peak VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Yellow Typ. Max. Units V uA Test Conditions = 5V
Parameter Power dissipation DC Forward Current Peak Forward Current  Reverse Voltage Operating/Storage Temperature Lead Solder Temperature  Lead Solder Temperature 
Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base.
Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength) , the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard).