Details, datasheet, quote on part number: KB847-M
PartKB847-M
CategoryOptoelectronics => Display
DescriptionMaterial: , Wavelength:
CompanyKingbright USA Corporation
DatasheetDownload KB847-M datasheet
Quote
Find where to buy
 
  

 

Features, Applications

GENERAL PURPOSE HIGH ISOLATION VOLTAGE SINGLE TRANSISTOR TYPE PHOTOCOUPLER SERIES
FEATURES

1.High isolation voltage between input and output (Viso=5000 Vrms) 2.Compact dual-in-line package KB847-M:4 channel type. 3.Long creepage distance type. by UL and CUL, file NO. E225308

DESCRIPTION

(4-channel) is optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor. 2.The lead pitch 2.54mm. 3.Solid insulation thickness between emitting diode and output phototransistor: 0.6mm.

APPLICATIONS

1.Computer terminals 2.Registers, copiers, automatic vending machines 3.System appliances, measuring instruments 4.Programmable logic controller 5.Signal transmission between circuits of different potentials and impedances

* PACKAGE DIMENSIONS (UNIT: mm) Lead Bending Type for long creepage distance

Forward current Input Reverse voltage Power dissipation Collector-emitter voltage Output Emitter-collector voltage Collector current Collector power dissipation Total power dissipation

Parameter Forward voltage Input Peak forward voltage Reverse current Output Collector dark current
Symbol VF VFM IR ICEO CTR VCE(sat) fc Rise time Fall time tr tf
Collector-emitter saturation voltage Cut-off frequency Response time

Classification table of current transfer ratio is shown below. Ic CTR= X 100% Model No. KB847AD-M KB847-M Rank mark


 

Some Part number from the same manufacture Kingbright USA Corporation
KL-02 Material: , Wavelength:
KL-03
KL-04
KL-05
KL-07LS
KPDA-56-101 DC/DC Convertersmd
KPDA-56-102
KPDA-56-103
KPDA-56-105
KPDA-56-106
KPDA-56-107
KPDA-56-109
KPDA-56-110
KPDA-56-112
KPDA-56-113
L-934CA/2GD-90 T-1 (3mm) Bi-level Led Indicator. Green. Lens Type Green Diffused.
L-934CA/2ID-90 T-1 (3mm) Bi-level Led Indicator. High Efficiency Red. Lens Type Red Diffused.
L-934CA/2SRD-90 T-1 (3mm) Bi-level Led Indicator. Super Bright Red. Lens Type Red Diffused.
L-934CA/2YD-90 T-1 (3mm) Bi-level Led Indicator. Yellow. Lens Type Yellow Diffused.
L-934DB/2GD T-1 (3mm) Bi-level Led Indicator. Green. Lens Type Green Diffused.
L-934DB/2ID T-1 (3mm) Bi-level Led Indicator. High Efficiency Red. Lens Type Red Diffused.

APC3216EC : 3.2 X 1.6 MM SMD Chip Led Lamp. High Efficiency Red (peak Wavelength 627 Nm). Lens Type Water Clear.

W934YD : Material: GAASp/gap , Wavelength: 588nm

KPT-2012HT : 2.0x1.2mm Super THIN SMD CHIP LED Lamps

AA3529SES-L : 3.5x2.8 mm SMD CHIP LED LAMP

WP1004ID : 1.1x3.4mm Rectangular Solid LAMP

APG1608PBAZC-RV : Standard LED - SMD Blue, Water Clear 35mcd, 470nm Kingbright ultra-thin 0603 SMD LED s are 1.6 mm x 0.8 mm surface-mount LED lamps with a thickness of only 0.25 mm. These Kingbright LED s provide low power consumption and a wide viewing angle and are compatible with automatic placement equipment. LED color options include green, blue, hype

AAA3528CGKSRC : LEDs -; LED 3.5X2.8MM RED/GRN CLR SMD Specifications: Color: Green, Red ; Lens Style/Size: Round with Flat Top, 2.4mm ; Millicandela Rating: 80mcd Green, 150mcd Red ; Voltage - Forward (Vf) Typ: 2.1V Green, 1.85V Red ; Wavelength - Dominant: 570nm, 640nm ; Wavelength - Peak: 574nm, 660nm ; Current - Test: 20mA ; Viewing Angle: 120 ; Le

SA43-13SURKWA : 7 SEG NUMERIC DISPLAY, BRIGHT RED, 10.92 mm Specifications: Display Type: Segmented ; Character Type: Numeric ; Common: Common Anode ; LED Color: Red ; Character Height: 10.92 mm (0.4299 inch) ; Operating Temperature: -40 to 185 F (233 to 358 K)

Same catergory

66125 : 20 Pin Lcc, Dual Channel, Similar to 4N55,. DUAL CHANNEL, HERMETICALLY SEALED 20 PIN LCC VERY HIGH SPEED, SIMILAR TO 4N55 : DSCC Drawing 87679032X 1500 Vdc isolation test voltage TTL and CMOS compatible 2mHZ bandwidth typical High radiation immunity Hermetic Package Applications: Military and Space High reliability systems Voltage Level Shifting Isolated Receiver Input Communication systems Medical.

APBA3010YSGC : Material: GAASp/gap , Gap , Wavelength: 588nm/568nm. x 1.0mm SMT LED, 2.0mm THICKNESS. !LOW POWER CONSUMPTION. !WIDE VIEWING ANGLE. !IDEAL FOR BACKLIGHT AND INDICATOR. ! PACKAGE The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode.

gm5060 : LCD Monitor Controllers. up to Uxga.

HEDS-5120K02 : Motion Control. Two And Three Channel Codewheels. Quick Assembly Two and Three Channel Optical Encoders Technical Data HEDS-5500/5600 and HEDM5500/ 5600 are two square waves in quadrature. The HEDS-5540 and 5640 also have a third channel index output in addition to the two channel quadrature. This index output a 90 electrical degree, high true index pulse which is generated once for each full rotation.

LC25T : 2.5 Gb/s Buried Het Tunable Unlocked Laser - DWDM. 2.5 Gb/s Buried Het 4x100GHz Tunable Laser with extended reach option This laser module employs the Bookham Technology gain coupled SLMQW buried heterostructure DFB laser chip, and has been designed specifically for use in Wavelength Division Multiplexed (WDM) 2.5 Gb/s long distance optical fibre trunk systems. The device is packaged in a hermetically.

LX3055 : Ingaas/inp Pin Photo Detectors. Microsemi's InGaAs/InP PIN Photo Diode chips are ideal for high bandwidth 1310nm and 1550nm optical networking applications. The device series offers high responsivity, low dark current, and high bandwidth for high performance and low sensitivity receiver design. The LX3055 4 Gbps coplanar waveguide photodiode is currently offered in die form allowing.

MGLS-12032B : Standard Character LCD Module. Dot = 120 X 32 ;; Dot Size W X H = 0.55 X 0.61 ;; Dot Pitch = 0.60 X 0.66.

MSM6222B-01 : Dot Matrix LCD Controller With 16 Dot Common Driver And 40 Dot Segment Drtver.

PC814X : High ISOlation Voltage, ac Input Response Photocoupler. 1. AC input 2. High isolation voltage between input and output (Viso (rms) :5kV) 3. Compact dual-in-line package 4. Current transfer ratio CTR:MIN. VCE=5V 5. Recognized by UL, file No. E64380 (model No PC814) Lead forming type (I type) and taping reel type (P type) are also available. (PC814XI/PC814XP) Applications Parameter Symbol Forward current IF *1 Peak.

QEB421 : Surface Mount Infrared Light Emitting Diode. SURFACE MOUNT INFRARED LIGHT EMITTING DIODE NOTES: 1. Dimensions are in inches (mm) 2. Tolerance (.25) on all non nominal dimensions unless otherwise specified. Parameter Operating Temperature Storage Temperature Soldering Temperature Reverse Voltage Peak Forward Current(4) Power Dissipation(1) (Flow)(2,3) Continuous Forward Current (TA = 25C unless.

S6B0755 : 128 Seg / 65 Com Driver & Controller For STN LCD. mailto:lhs98@samsung.co.kr Contents in this document are subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of LCD Driver IC Team. S6B0755 Revision History Version 0.0 0.1 Original Append PAD configuration.

SA08-13GWA : Material: Gap , Wavelength: 568nm. !0.8 INCH DIGIT HEIGHT. !LOW CURRENT OPERATION. !EXCELLENT CHARACTER APPEARANCE. ! EASY The Green source color devices are made with Gallium Phosphide GreenLight Emitting Diode. !I.C. COMPATIBLE. !CATEGORIZED FOR LUMINOUS INTENSITY. !MECHANICALLY RUGGED. ! STANDARD Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless.

W1334GC : Material: Gap , Wavelength: 568nm. POWER CONSUMPTION. LIFE-SOLID STATE RELIABILITY. AND RUGGED. The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. s are subject to change without.

W2523SURC : Material: Ingaalp , Wavelength: 628nm. !OUTSTANDING MATERIAL EFFICIENCY. !RELIABLE AND RUGGED. !I.C. COMPATIBLE. The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. s are subject to change.

XFMR20D2C : Material (Color) = GaAlAs(Red);; Lens = Red Diffused;; Peak Wave Length = 660;; Iv(ucd) If@10mA Min.= *180;; Iv(ucd) If@10mA Typ.= *405.

333-2UYT/S530-A2 : Standard LED - Through Hole Yellow Translucent 589nm 1600mcd. » » » LEDs - High Brightness - Leaded - Yellow LEDs - High Brightness - Leaded - Yellow Standard Leaded LED components are often used in indication applications and generally have power levels s: Manufacturer: Everlight ; Product Category: Standard LED - Through Hole ; RoHS:.

593-303030-013F : LED , Round with Domed Top, 3mm 2V 30mA Green, Red (x 3) Surface Mount, Right Angle; LED PRISM 3MM RDGN/RDGN/RDGN SMD. s: Color: Green, Red (x 3) ; Mounting Type: Surface Mount, Right Angle ; Configuration: 3 High ; Voltage Rating: 2V ; Current: 30mA ; Lens Style/Size: Round with Domed Top, 3mm ; Packaging: Cut Tape (CT) ; Lens Type: Diffused ; Lead.

HT7938A : High Current And Performance White LED Driver The HT7938A is high efficiency boost converter with constant current output for backlight applications in handheld devices. Using a series connection of LEDs provides constant identical LED currents resulting in uniform brightness. The continuous LED current is set using the device FB pin regulated voltage.

 
0-C     D-L     M-R     S-Z