Details, datasheet, quote on part number: LSFB19-243-220K0
CategoryTiming Circuits => SAW Filters
DescriptionFrequency: 243.95 MHZ
CompanyKinseki, Limited
DatasheetDownload LSFB19-243-220K0 datasheet


Features, Applications

Item Nominal Frequency Operating Temperature Range Storage Temperature Range Insertion Loss Unit MHz : dB Conditions -10~+60 -35~+85 Minimum Loss Fo±0.6MHz Guaranteed Attenuation Fo±1.2MHz Fo-21.6MHz Group Delay Deviation Typ. LSFB19-243-220K0 Specifications 243.95 5.0 MAX. 25 MIN. 40 MIN. 60 MIN. 1.2 MAX. Typ. LSFB19-248-220K0 Specifications 248.45 5.0 MAX. 25 MIN. 35 MIN. 60 MIN. 1.2 MAX.


Some Part number from the same manufacture Kinseki, Limited
LSFB19-248-220K0 Frequency: 248.45 MHZ
LSFB20-469-001M0 469.1875 Mhz, Babd Saw Filter of Low Power Consumption
LSFB25-243-220K0 200mhz Band Saw Filter of PHS
LSFB44-426-400K0 426.54 Mhz, Babd Saw Filter of Low Power Consumption
LSFB44-429-800K0 429.5500 Mhz, Babd Saw Filter of Low Power Consumption
LSFB44-440-400K0 440.2000 Mhz, Babd Saw Filter of Low Power Consumption
LSFB54-190-004M0 W-cdma-if
LSFB54-190-004M2 Frequency: 190 MHZ
LSFB54-380-004M0 380.0 Mhz, Wide-band if Filter For W-cdma
LSFC21-380-004M0 W-cdma-if
MFO-208F Frequency: 2<->55 MHZ
MSF30-183-001M0 Frequency: 183.6 MHZ
MSFB12-85-02640 85.38 Mhz, if Filter For Amps
MSFB12-85-026K0 Amps-if
MSFB22-155-155K0 155.52 Mhz, Fiber Optic Communication
MSFB22-622-622K0 622.08 Mhz, Fiber Optic Communication
MSFB27-183-022K8 Amps-if
MSFB39-210-001M0 Pcs-cdmaone-if
MSFB43-85-001M0 85.380 Mhz, Wide-band if Filter For Cdmaone
Same catergory

A493-02 : Precise 5 Tap Leading Edge Control, TTL Active. 5 TAP LEADING EDGE CONTROL PRECISE DELAY MODULES SMD S493-0125-02 S493-0150-02 Thru-Hole A493-0125-02 A493-0150-02 Total Delay 35 ns Delay per Tap 7 ns Rise Time 3 ns Ein Trin PW PP Iccl Vcc Pulse Voltage Rise Time Pulse Width Pulse Period Supply Current Supply Voltage 3.2 Volts 1.2 x Total Delay 4 x Pulse Width 35 ma Typical 5.0 Volts Vcc Vih Vil Ioh Iol Voh Vol Vik Iih Iil Ios Icch.

CX-2V-SM : Crystal Oscillators->Surface Mount Crystal. Surface Mount Crystal. Miniature Surface Mount Quartz Crystal for Pierce Oscillators The CX-2V-SM quartz crystals are leadless devices designed for surface mounting on printed circuit boards or hybrid substrates. These miniature crystals are intended to be used in Pierce oscillators. They are hermetically sealed in a rugged, miniature ceramic package. They are manufactured.

DO2500A : Crystal Oscillator SMD 25.000000mhz. Surface Mount Crystal Oscillators Seiko Epson Frequency range to 125.00MHz World's best selling SMD oscillator stocked in depth Output Enable/Disable now standard Excellent and price Output frequency range Power source voltage Temperature range Max. supply voltage Operating voltage Storage temp. Operating temp. Soldering condition Frequency stability.

HD151TS308RP : Clock Generator for Printers and General SSC. Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory chips.

ICS9248SB-131 : CPU/Memory Specific PLL. Frequency Generator & Integrated Buffers For Celeron & Pii/iii(tm).

M3500C-0916 : Input Voltage Limiting. INPUT VOLTAGE LIMITING (ON M3500-0916 ONLY) The M3500-0916 uses an input zener diode to clamp the input voltage at 13V. This guarantees that the VCO always has an output at high tune voltages. Micronetics recommends that an input resistor be used in designs where the input tune line voltage may be larger than 13V in order to limit the current flow through.

MAX6902EVKIT : Timekeeping, Timers, and Counters. MAX6902EVSYS, MAX6902EVKIT Evaluation System/evaluation Kit For The MAX6902.

MK3711B : Low Cost 8-16 MHZ 3.3V Vcxo. The MK3711D and MK3711B are drop-in replacements for the original MK3711S and later MK3711A devices. Compared to these earlier devices the MK3711D and MK3711B offer a wider operating frequency range and improved power supply noise rejection. Used in conjunction with an external pullable quartz crystal, this monolithic integrated circuit replaces more.

MQF10.7-0700/03 : Monolithic Crystal Filter (MCF). Pole No. = 6 ;; Loss /dB = 3.5 ;; Passband /dB = 6.0 ;; Passband /±kHz = 3.50 ;; Ripple /dB = 2.0 ;; Ripple /±kHz = 3.0 ;; Stopband /dB = 60 ;; Stopband /±kHz = 10.00 ;; Stopband /dB = 80 ;; Stopband /±kHz = 15.00 ;; Impedance R/ohm = 2500 ;; Impedance C/pf = 25.00 ;; Remarks =   ;; Case.

MQF70.0-1000/08 : Monolithic Crystal Filter (MCF). Pole No. = 8 ;; Loss /dB = 8.0 ;; Passband /dB = 3.0 ;; Passband /±kHz = 5.00 ;; Ripple /dB = 1.0 ;; Ripple /±kHz = 3.0 ;; Stopband /dB = 60 ;; Stopband /±kHz = 17.50 ;; Stopband /dB = 60 ;; Stopband /±kHz =   ;; Impedance R/ohm = 50 ;; Impedance C/pf = 0.00 ;; Remarks =   ;; Case.

PLL350-1627 : High Performance Signal Source. Model: PLL350-1627 Rev: B Date: 4/17/2003 Customer: VARI-L COMPANY Operating Temperature Range: AppNote: 113, Opt. ° C) Parameter Frequency Range Step Size Settling Time - To within 1.0 kHz Output Power Output Phase Noise: 1 kHz 100 kHz 800 kHz Power Supply: VCO PLL IC Supply Current: VCO PLL IC Spurious Product - 200 kHz Reference Feedthrough Harmonic.

SY58016L : Receiver/Buffer/Driver. 3.3V 10Gbps Differential CML Line Driver/receiver W/internal Termination.

V602ME15 : Package Style = MINI-14S-L ;; Frequency (MHz) = 1100 to 1400 ;; N@10KHz (dBc/Hz) = -100 ;; Tuning Voltage (Vdc) = 0.50 to 4.50 ;; Tuning Sensitivity (MHz/V) = 123 ;; Power (dBm) = 8.50 ± 2.50 ;; Op.temp ( C) = -40 to 85 ;; VCC (Vdc) = 5.00 ;; Icc (mA) = 21.

VC-TCXO-208C : Crystal Oscillators. Frequency: 12.819.8 MHZ. ˇVC-TCXO for Personal Cellular Phone. ˇBecause it is leadless type, automatic mounting is possible. ˇUltra small size. (5×3.2×1.35mm) Micro scopic size ˇReflow Soldering. ˇLow power consumption. Type Item Standard Frequency Stability Frequency Deviation/ Voltage (only VC-TCXO) Aging Supply Voltage Supply Current Load Output Level Start up time Capacity.

VCO-104 : Hi-rel Vco. Model: VCO-104 Rev: Date: 7/22/2002 Customer: VARI-L COMPANY Operating Temperature Range: ° C) Parameter Frequency Range Tuning Voltage: 100 MHz 200 MHz Tuning Sensitivity: 100 MHz 125 MHz 150 MHz 175 MHz 200 MHz Output Power Output Phase Noise: 10 kHz 100 kHz 1000 kHz Power Supply Current Harmonic Suppression: 2nd Harmonic 3rd Harmonic Spurious (Non-Harmonic).

VCO-111TC : Hi-rel Vco. Model: VCO-111TC Rev: Date: 7/23/2002 Customer: VARI-L COMPANY Operating Temperature Range: ° C) Parameter Frequency Range Tuning Voltage: 1500 MHz 2750 MHz Tuning Sensitivity: 1500 MHz 1812.5 MHz 2125 MHz 2437.5 MHz 2750 MHz Output Power Output Phase Noise: 10 kHz 100 kHz 1000 kHz Power Supply Current Harmonic Suppression: 2nd Harmonic 3rd Harmonic.

0-C     D-L     M-R     S-Z