Details, datasheet, quote on part number: SG1525A
CategoryPower Management => Regulators => Switching Regulators
DescriptionRegulating Pulse Width Modulator
CompanyLinear Technology Corporation
DatasheetDownload SG1525A datasheet
Cross ref.Similar parts: UC1525AJ
Find where to buy
Related products with the same datasheet
Some Part number from the same manufacture Linear Technology Corporation
SG1527A Regulating Pulse Width Modulator
SL30495 Zero Drift Rail-to-rail In/out Precision in Amp For Use With LTC1923 in Tec Apps
T1070HV 5a And 2.5a High Efficiency Switching Regulators
T1074HV Step-down Switching Regulator
LTC4063 Standalone Linear Li-Ion Charger with Micropower Low Dropout Linear RegulatorThe LTC®4063 is a standalone linear charger for single cell lithium-ion batteries with an adjustable low dropout linear regulator
LT3483 Inverting Micropower DC/DC Converter with Schottky in ThinSOT PackageThe LT®3483 is a micropower inverting DC/DC converter with integrated Schottky and one resistor feedback. The small package size,
LT5525 High Linearity, Low Power Downconverting MixerThe LT®5525 is a low power broadband mixer optimized for high linearity applications such as point-to-point data transmission, high performance radios and wireless
LTC3406B-1.2 1.5MHz, 600mA Synchronous Step-Down Regulator in ThinSOTThe LTC®3406B-1.2 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. Supply current
LTC3803-5 Constant Frequency Current Mode Flyback DC/DC Controller in ThinSOTVIN and VOUT Limited Only by External Components 4.8V Undervoltage Lockout Threshold Operating Junction Temperature from –40°C to 150°C
LT3434 High Voltage 3A, 200kHz Step-Down Switching Regulator with 100µA Quiescent CurrentWide Input Range: 3.3V to 60V 3A Peak Switch Current Burst Mode® Operation: 100µA Quiescent Current** Low Shutdown
LTC2924 Quad Power Supply SequencerThe LTC®2924 is a power supply sequencer designed for use with external N-channel MOSFETs or power supplies with shutdown pins. Four power supplies can be fully sequenced by a single
Same catergory

ADR420 : 2.048 V XFET Voltage Reference. Low Noise 1.75 V p-p to 10 Hz) Low Temperature Coefficient: 3 ppm/ C Long-Term Stability: 50 ppm/1000 Hours Load Regulation: 70 ppm/mA Line Regulation: 35 ppm/V Low Hysteresis: 40 ppm Typical Wide Operating Range 18 V Quiescent Current: 0.5 mA Max High Output Current: 10 mA Wide Temperature Range: +125 C APPLICATIONS Precision Data Acquisition Systems.

AMS2910-15 : 1a Low Dropout Voltage Regulator. Three Terminal Adjustable or Fixed Voltages* 2.85V, 3.3V, and 5.0V Output Current of 1A Operates Down to 1V Dropout Line Regulation: 0.2% Max. Load Regulation: 0.4% Max. Available TO-263, TO-252 and SOT-223 packages APPLICATIONS High Efficiency Linear Regulators Post Regulators for Switching Supplies to 3.3V Linear Regulator Battery Chargers Active.

B380C3300 : 5.0a Bridge Rectifier.

BA6288FS : . The is a reversible-motor driver with a maximum output current of 1.0A. Two logic inputs allow four output modes: forward, reverse, stop (idling), and brake. A built-in power saving circuit suppresses current consumption when the motor is in stop mode. FApplications Compact, low-current DC motors and portable equipment such as camcorders F 1) Two logic.

CS51221EDR16 : Off-Line Controllers. Enhanced Voltage Mode PWM Controller, Package: Soic, Pins=16.

HIP6016CB : Advanced PWM And Dual Linear Power Control. The HIP6016 provides the power control and protection for three output voltages in high-performance microprocessor and computer applications. The IC integrates a PWM controller, a linear regulator and a linear controller as well as the monitoring and protection functions into a single package. The PWM controller regulates the microprocessor core voltage.

LPD10Series : Single, Dual And Triple Output. 4:1 wide input voltage range 16 models available including 3.3V outputs Input reflected ripple according to CEPT Continuous short circuit protection EN55022 conducted emissions level B Designed to meet EN60950 and IEC950 The LPD10 series of DC/DC converters offer 10 Watts output power in inch package. 3.3V single outputs are available along with standard.

MAX1758EAI : Stand-alone, Switch-mode li Battery Charger With Internal 28v Switch. Stand-Alone, Switch-Mode Li+ Battery Charger with Internal 28V Switch The is a switch-mode lithium-ion (Li+) battery charger that charges one-to-four cells. It provides a regulated charging current accurate to ±10% and a regulated voltage with only a ±0.8% total voltage error at the battery terminals. The internal high-side switch delivers a programmable.

P10SG-0505ZH52 : Power/w = 2 ;; Input/vdc = 5/12/24 ;; Output/vdc = +/-3,6/5/9/12/15/18 Regulated ;; ISOlation = 5200V ;; Package = DIP24.

PT6725 : Non-Isolated DC-DC Converters. to 14A Output Current +12V Input 93% Efficiency (PT6724) On/Off Standby Function Differential Remote Sense Adjustable Output Voltage Short Circuit Protection 17-pin Space-Saving Package Solderable Copper Case The PT6725 series of power modules are integrated switching regulators (ISRs), housed a 17-pin space saving solderable copper package. These modules.

SMS2902 : Precision Reset. Precision Voltage Supervisory Circuit With Watchdog Timer And 2k I2C Memory.

TPS76525D : ti TPS76525, Ultra-low-quiescent-current 150-mA LDO Linear Regulators.

UC3525B : Voltage Mode PWM Controllers. Regulating Pulse Width Modulator. The UC1525B/1527B series of pulse width modulator integrated circuits are designed to offer improved performance and lowered external parts count when 5.1V Buried Zener Reference used in designing all types of switching power supplies. The on-chip +5.1V Trimmed to ±0.75% buried zener reference is trimmed to ±0.75% and the input common-mode range to 500kHz.

VUB60 : Three Phase Rectifier Bridge With Igbt And Fast Recovery Diode For Braking System.

ZXBM2001X10TA : Variable Speed 2-phase Fan Motor Controller. The is a series 2-phase, DC brushless motor pre-drivers with PWM variable speed control suitable for fan and blower motors. Built in lock detect protection, rotational speed sensing and automatic recovery Built in Hall amplifier allows direct connection to Hall element PWM Speed control can be implemented via external voltage or resistance (thermistor).

LTC3562 : I2C Quad Synchronous Step-Down DC/DC Regulator 2 X 600mA, 2 X 400mA The LTC3562 is a quad high efficiency monolithic synchronous step-down regulator with an I2C interface. Two regulators are externally adjustable and can have their feedback voltages programmed between 425mV and 800mV in 25mV steps (Type A). The other two regulators are fixed output.

LTC2919CMS-5#TRPBF : Precision Triple/Dual Input UV, OV And Negative Voltage Monitor The LTC2919 is a triple/dual input monitor intended for a variety of system monitoring applications. Polarity selection and a buffered reference output allow the LTC2919 to monitor positive and negative supplies for undervoltage (UV) and overvoltage (OV) conditions. The two adjustable inputs.

AAT3783 : 1-A Linear Li-Ion/Polymer Battery Charger With 28V Over-Voltage Protection The AAT3783 BatteryManager?? is a single-cell Lithium-Ion (Li-Ion)/Li-Polymer battery charger IC, designed to operate from USB ports, AC adapter inputs, or from a charger adapter up to an input voltage of 6.5V. For increased safety, the AAT3783 also includes over-voltage input.

MIC5310 : MIC5310 : Dual, 150mA µCap In 2mm × 2mm MLF The MIC5310 is a tiny Dual Ultra Low-Dropout (ULDO™) linear regulator ideally suited for portable electronics due to its high power supply ripple rejection (PSRR) and ultra low output noise. The MIC5310 integrates two high-performance; 150mA ULDOs into a tiny 2mm x 2mm leadless MLF ® package, which provides.

FAN8060 : 1.2MHz, 1A Synchronous Step-Down DC/DC Converter The FAN8060 is a highly efficient, monolithic, currentmode, step-down synchronous regulator. It can provide 1A continuous current from 2.5V to 5.5V input voltage. The output voltage can be adjusted from 1.2V up to the input voltage with an external voltage divider. External compensation and soft-start.

0-C     D-L     M-R     S-Z