|Category||Interface and Interconnect => SCSI|
|Description||Pci to Dual Channel Ultra2 Scsi Multifunction Controller Technical Manual V3.2 4/01|
|Company||LSI Logic Corporation|
|Datasheet||Download LSI53C896 datasheet
This document contains proprietary information of LSI Logic Corporation. The information contained herein is not to be used by or disclosed to third parties without the express written permission of an officer of LSI Logic Corporation. LSI Logic products are not intended for use in life-support appliances, devices, or systems. Use of any LSI Logic product in such applications without written consent of the appropriate LSI Logic officer is prohibited. Document DB14-000083-03, Fourth Edition (April 2001) This document describes the LSI Logic LSI53C896 PCI to Dual Channel Ultra2 SCSI Multifunction Controller and will remain the official reference source for all revisions/releases of this product until rescinded by an update. To receive product literature, visit us at http://www.lsilogic.com. LSI Logic Corporation reserves the right to make changes to any products herein at any time without notice. LSI Logic does not assume any responsibility or liability arising out of the application or use of any product described herein, except as expressly agreed to in writing by LSI Logic; nor does the purchase or use of a product from LSI Logic convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual property rights of LSI Logic or third parties. Ultra SCSI is the term used by the SCSI Trade Association (STA) to describe Fast-20 SCSI, as documented in the SCSI-3 Fast-20 Parallel Interface standard, X3.277-199X. Ultra2 SCSI is the term used by the SCSI Trade Association (STA) to describe Fast-40 SCSI, as documented in the SCSI Parallel Interface2 standard, (SPI2) X3T10/1142D. Copyright 19982001 by LSI Logic Corporation. All rights reserved. TRADEMARK ACKNOWLEDGMENT The LSI Logic logo design, TolerANT, LVDlink, and SCRIPTS are registered trademarks or trademarks of LSI Logic Corporation. All other brand and product names may be trademarks of their respective companies.
This book is the primary reference and technical manual for the LSI Logic Corporation LSI53C896 PCI to Dual Channel Ultra2 SCSI Multifunction Controller. It contains a complete functional description for the product and includes complete physical and electrical specifications.
Audience This document was prepared for system designers and programmers who are using this device to design an Ultra2 SCSI port for PCI-based personal computers, workstations, servers or embedded applications.Organization This document has the following chapters and appendixes:
Chapter 1, Introduction, describes the general information about the LSI53C896. Chapter 2, Functional Description, describes the main functional areas of the chip in more detail, including the interfaces to the SCSI bus and external memory. Chapter 3, Signal Descriptions, contains the pin diagram and signal descriptions. Chapter 4, Registers, describes each bit in the operating registers, and is organized by register address. Chapter 5, SCSI SCRIPTS Instruction Set, defines all of the SCSI SCRIPTS instructions that are supported by the LSI53C896. Chapter 6, Specifications, contains the electrical characteristics and AC timing diagrams. Appendix A, Register Summary, is a register summary.
|Some Part number from the same manufacture LSI Logic Corporation|
|LSI53CF92A Fast Scsi Controller Technical Manual V2.1 4/02|
|LSI60800 Pci to Usb Host Adapter User's Guide V1.1 11/00|
|LSI7202CP Compactpci Dual Channel 2 Gbit/s Fibre Channel Host Adapter User's Guide V1.0 2/02|
|LSI8750SP Pci to Ultra Scsi Host Adapter User's Guide V2.1 11/00|
|LSI8751D Pci to Scsi Host Adapter User's Guide V3.0 8/01|
|LSI8751SP Pci to Ultra Scsi Host Adapter User's Guide V2.1 11/00|
|LSI8751SPE Pci to Ultra Scsi Host Adapter User's Guide V1.1 11/00|
|LSI8951U Pci to Ultra2 Scsi Host Adapter User's Guide V2.1 11/00|
|LSIFC909 Fibre Channel I/o Processor Technical Manual V2.1 8/00|
|LSIFC919 Single Channel Fibre Channel I/o Processor Technical Manual V2.1 9/02|
|LSIFC919X Single Channel Fibre Channel I/o Processor Technical Manual V2.0 6/03|
|LSIFC929 Pci-x to Dual-channel Fibre Channel Solutions<<<>>>the LSIFC929X Controller Offers Industry-leading Performance at an Affordable Price. The LSIFC929X Controller Includes Three Embedded Arm Processors And Advanced|
|LSIFC929 Dual Channel Fibre Channel I/o Processor Technical Manual V2.0 8/01|
|LSIFC929X Dual Channel Fibre Channel I/o Processor Technical Manual V2.0 6/03|
|LSIFC929X Pci-x to Dual-channel Fibre Channel Solutions<<<>>>the LSIFC929X Controller Offers Industry-leading Performance at an Affordable Price. The LSIFC929X Controller Includes Three Embedded Arm Processors And Advanced|
|LSIU160 Pci to Single Channel Ultra 160 Scsi Host Adapter User's Guide V1.2 8/02|
|LSIU40HVD Pci to Dual Channel Scsi Host Adapter User's Guide V2.2 8/02|
|LSIU40SE Dual Channel Pci to Ultra Scsi Host Adapter User's Guide V2.2 8/02|
|LSIU80LVD Pci to Ultra2 Scsi Host Adapter User's Guide V2.2 8/02|
8104 : Gigabit Ethernet Controller
EM2C : Transceiver/Repeater Ethernet Transceiver Module With on Board ISOlation Transformer & DC/DC Converter
LSI22903 : SCSI driver development Host Adapter to Intel ISP1100 Internet Server Quick Installation Guide V1.1 11/00
LSI8751D : SCSI driver development Pci to Scsi Host Adapter User's Guide V3.0 8/01
QQ84301 : 4-port Fast Ethernet Controller
CD1400 : CD1400 Uxart Serial/parallel Controller. The is a flexible asynchronous receiver/transmitter with four full-duplex serial channels, or three full-duplex serial channels and one high-speed bidirectional parallel channel. With optional special character processing capabilities, it is especially well-suited for UNIX applications. The CD1400 is fabricated in an advanced-CMOS process and operates.
DS90CR218 : Channel Link. DS90CR218 - +3.3V Rising Edge Data Strobe LVDS 21-Bit Channel Link Receiver - 75 Mhz, Package: Tssop, Pin Nb=48.
iC-JRX : µP Interface, 2x4 24V High-side Driver Operates Bidirectional And Load Diagnosis.
ISO485P : ti ISO485, ISOlated RS-485 Transceiver. q RS-485 AND RS-422 COMPATIBLE q 100% TESTED FOR HIGH-VOLTAGE BREAKDOWN RATED 1500Vrms SINGLE-WIDE 24-PIN PLASTIC DIP EASY TO USE LOW POWER: 180mW typ at 5Mbit/s The ISO485 differential, isolated bus transceiver uses Burr-Brown's capacitively coupled isolation technology to provide high-speed, low cost bus isolation. The ISO485 is designed for bi-directional.
MAX1489E : 15kV ESD-Protected, Quad, Low-power RS-232 Line Receiver. The MAX1489E quad, low-power line receiver is designed for EIA/TIA-232, EIA/TIA-562, and CCITT V.28 communications in harsh environments. Each receiver input is protected against ±15kV electrostatic discharge (ESD) shocks. These inputs have a ±25V range and feature hysteresis and time-domain filtering. The outputs are TTL and CMOS compatible. The MAX1489E.
MAX9315 : 1:5 Differential Lvpecl/lvecl/hstl Clock And Data Driver. to +3.8V Supply for Differential HSTL/LVPECL Operation to -3.8V Supply for Differential LVECL Operation o Two Selectable Differential Inputs o Synchronous Output Enable/Disable o 20ps Output-to-Output Skew o 360ps Propagation Delay o Guaranteed 400mV Differential Output 1.5GHz o On-Chip Reference for Single-Ended Inputs o Input Biased Low when Left.
MAX9316A : MAX9316A 1:5 Differential (LV)PECL/(LV)ECL/HSTL Clock And Data Driver.
SN75C1406 : Triple Low-power Drivers/receivers. Meet or Exceed the Requirements of TIA/EIA-232-F and ITU Recommendation V.28 Very Low Power Consumption. 5 mW Typ Wide Driver Supply Voltage Range. ±15 V Driver Output Slew Rate Limited to 30 V/µs Max Receiver Input Hysteresis. 1000 mV Typ Push-Pull Receiver Outputs On-Chip Receiver 1-µs Noise Filter Functionally Interchangeable With Motorola MC145406.
TSB12LV31 : Ieee 1394-1995 General-purpose Link-layer Controller. IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold.
UCC5606 : 9-line 3-5 Volt Scsi Active Terminator, Reverse Disconnect. 9-Line 3-5 Volt SCSI Active Terminator, Reverse Disconnect Complies with SCSI, SCSI-2 and SCSI-3 Standards to 7V Operation 1.8pF Channel Capacitance during Disconnect 1µA Supply Current in Disconnect Mode 110 Ohm/2.5k Programmable Termination Completely Meets SCSI Hot Plugging -400mA Sourcing Current for Termination +400mA Sinking Current for Active.
ADM3491E : 3.3 V, ±15 kV ESD-Protected, Full-Duplex Transceiver Featuring Enable Inputs for the Driver & Receiver Product The ADM3486E/ADM3490E/ADM3491E are 3.3 V low power data transceivers with ±15 kV ESD protection suitable for fulland half-duplex communication on multipoint bus transmission lines. They are designed for balanced data transmission and comply.
MAX13020 : The MAX13020/MAX13021 are upgrades to industry standard LIN tranceivers offering +/-60V Fault protection and +/-12kV ESD HBM Protection on the LIN bus pin. The MAX13020/MAX13021 ±60V fault-protected low-power local interconnect network (LIN) transceivers are ideal for use in automotive network applications where high reliability is required. The devices.
ISL3294E : ±16.5kV ESD Protected, +125°C, 3.0V to 5.5V, SOT-23/TDFN Packaged, Low Power, RS-485/RS-422 Transmitters The Intersil ISL3293E, ISL3294E, ISL3295E, ISL3296E, ISL3297E, ISL3298E are ±16.5kV HBM ESD Protected (7kV IEC61000 contact), 3.0V to 5.5V powered, single transmitters for balanced communication using the RS-485 and RS-422 standards. These drivers.
LTC2872IUHF#TRPBF : RS232/RS485 Dual Multiprotocol Transceiver With Integrated Termination The LTCÂ®2872 is a robust pin-configurable transceiver that supports RS232, RS485, and RS422 standards while operating on a single 3V to 5.5V supply. The LTC2872 can be configured as four RS232 single-ended transceivers or two RS485 differential transceivers, or combinations of both,.