Details, datasheet, quote on part number: MA0S506AJ
PartMA0S506AJ
CategoryRF & Microwaves => Switches
Description 5.0 - 6.0 GHZ SPDT T/r Switch
CompanyM/A-COM, Inc.
DatasheetDownload MA0S506AJ datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Features

Ideal for 802.11a and Hiperlan Applications Positive Control Voltages +32 dB One dB Compression Point Fast Switching Speed No External Components Required MSOP-8 Package

Description

The is a medium power 6.0 SPDT switch. Typical applications include the transmit/receive functions in 802.11a, Hiperlan, and fixed wireless access applications. All RF impedances are 50 ohms, and all RF ports are internally DC blocked. The switch operates over a typical voltage range to 5.5 volts. The MA0S506AJ is offered an MSOP-8 package. The MA0S506AJ is fabricated using M/A-COM's 0.5 micron MESFET process for a low single supply voltage, high linearity, and excellent reliability.

Pin Function V1 V2 RFC VDD RF2 GND RF1 Description Control Voltage 1 Control Voltage 2 RF Common Port Supply Voltage RF Port 2 Ground RF Port 1

Part Number MA0S506AJ-R13 MA0S506AJ-SMB Description 7 inch, 1000 piece reel 13 inch, 3000 piece reel Sample Test Board

! North America: Tel. 366-2266 ! Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 ! Europe: Tel. 300 020 Visit www.macom.com for additional data sheets and product information.

Part 5.0 Description 6.0 SPDT T/R Switch Electrical Specifications: = 25 C, 50 1

Parameter Insertion Loss Isolation Return Loss TRISE, TFALL TON, TOFF 1 dB Compression Third Order Intercept to 90% RF, RF 50% Control to 90% RF, 50% Control 0/3 V, VDD 0/5 V, VDD 5 V Test Conditions Units dB nS dBm 25 Min Typ

1. Unless otherwise specified, input power is -10 dBm, VDD +5 V, control voltages are 0/+5 V, and test frequency is 5.775 GHz.

Parameter Max Input Power Control Voltages Supply Voltage Operating Temperature Channel Temperature Storage Temperature Absolute Maximum + 33 dBm +8.0 volts +8.0 volts +150 C

1. Exceeding any one or combination of these limits may cause permanent damage.

Gallium arsenide integrated circuits are ESD sensitive and can be damaged by static electricity. Use proper ESD precautions when handling these devices.

! North America: Tel. 366-2266 ! Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 ! Europe: Tel. 300 020 Visit www.macom.com for additional data sheets and product information.

Part 5.0 Description 6.0 SPDT T/R Switch Typical Performance Curves

! North America: Tel. 366-2266 ! Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 ! Europe: Tel. 300 020 Visit www.macom.com for additional data sheets and product information.


 

Related products with the same datasheet
MA0S506AJ-R13
MA0S506AJ-R7
MA0S506AJ-SMB
Some Part number from the same manufacture M/A-COM, Inc.
MA0S506AJ-R13  5.0 - 6.0 GHZ SPDT T/r Switch
MA40030 6 Ghz, Stripline Packaged Schottky Mixer Diode
MA40032
MA40033
MA40045
MA40045-137  Stripline Packaged Schottky Mixer Diode
MA40048 6 Ghz, Stripline Packaged Schottky Mixer Diode
MA40048-213  Stripline Packaged Schottky Mixer Diode
MA40053 3 Ghz, Schottky Detector Diode
MA40060 6 Ghz, Stripline Packaged Schottky Mixer Diode
MA40060-213  Stripline Packaged Schottky Mixer Diode
MA40064 3 Ghz, Schottky Detector Diode
MA40070 10 Ghz, Schottky Detector Diode
MA40088 9.375 Ghz, Stripline Packaged Schottky Mixer Diode
MA40089
MA40094
MA40095
MA40105-276
MA40108 10 Ghz, Schottky Detector Diode
MA40115-276  Stripline Packaged Schottky Mixer Diode
MA40126 9.375 Ghz, Stripline Packaged Schottky Mixer Diode

AT-266 :  Digital Attenuator, 1 Bit, 10 DB Step DC - 2.0 GHZ

EIN13 : Inductors  E-Series SMT Inductor 97 NH

LDPF0012-FCR : Pinfet Optical Receiver Modules

MA44701 : K BAND, 1.5 GHz, SILICON, STEP RECOVERY DIODE Specifications: Configuration: Single ; Pin Count: 1 ; Number of Diodes: 1 ; VBR: 120 volts ; CT: 8 to 10 pF

MA48702E-166 : 40 GHz, GALLIUM ARSENIDE, STEP RECOVERY DIODE Specifications: Configuration: Single ; Pin Count: 2 ; Number of Diodes: 1 ; VBR: 15 volts ; CT: 0.2500 to 0.3500 pF

MA4L032-30 : SILICON, PIN DIODE Specifications: Package: ROHS COMPLIANT, CERAMIC, CASE 1056, 2 PIN ; Number of Diodes: 1 ; RoHS Compliant: RoHS

MASW-007076-000100 : 50 MHz - 50000 MHz RF/MICROWAVE SGL POLE DOUBLE THROW SWITCH, 0.9 dB INSERTION LOSS Specifications: Frequency Range: 50 to 50000 MHz ; Insertion Loss: 0.9000 dB ; Type: Single Pole Double Throw ; Package Type: ROHS COMPLIANT PACKAGE-3 ; Operating Temperature: -55 to 125 C (-67 to 257 F)

ML4611P-91 : 40 V, SILICON, PIN DIODE Specifications: Number of Diodes: 1

ML6712-144 : 100 MHz - 500 MHz RF/MICROWAVE LIMITER Specifications: Limiter Type: Pin Diode Limiter ; Frequency Band: 100.0 to 500.0 MHz ; VSWR: 1.30 1

MLA2160-302B1 : 12000 MHz - 18000 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER Specifications: Amplifier Type: Power Amplifier ; Applications: RF Microwave ; Frequency Range: 12000 to 18000 MHz ; Minimum Gain: 11 dB ; Input VSWR: 2 1 ; Output VSWR: 2 1 ; Operating Temperature: -55 to 95 C (-67 to 203 F)

MLA2556-101A2 : 9500 MHz - 10500 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER Specifications: Amplifier Type: Power Amplifier ; Applications: RF Microwave ; Frequency Range: 9500 to 10500 MHz ; Input VSWR: 1.8 1 ; Output VSWR: 1.8 1 ; Operating Temperature: -55 to 95 C (-67 to 203 F)

S4449T : 7900 MHz - 8400 MHz RF/MICROWAVE ISOLATOR Specifications: Component: Isolator ; Frequency Range : 7900 to 8400 MHz ; Insertion Loss: 0.6000 dB ; VSWR: 1.4 1 ; Operating Temperature: 0.0 to 50 C (32 to 122 F)

Same catergory

855966 : = Filter - Egsm (Rx) High Rejection ;; Frequency (MHz) = 942.5 ;; Bandwidth (MHz) = 35 ;; Insertion Loss (dB) = 3.5 Max ;; Modes of Operation = Se/bal 200 Ohm ;; Package (mm) = 2.5 X 2.0.

856096 : = Filter - Broadband Access ;; Frequency (MHz) = 1090 ;; Bandwidth (MHz) = 10 ;; Insertion Loss (dB) = 5.8 Max ;; Modes of Operation = Bal ;; Package (mm) = 3.8 X 3.8.

A29-1 : LNAs.  10 to 1500 MHZ TO-8 Cascadable Amplifier. TO 1500 MHz CASCADABLE AMPLIFIER HIGH OUTPUT POWER: +22 dBm (TYP.) HIGH THIRD ORDER I.P.: +32 dBm (TYP.) Characteristics Frequency Small Signal Gain (min.) Gain Flatness (max.) Reverse Isolation Noise Figure (max.) Power Output 1 dB comp. (min.) IP3 IP2 Second Order Harmonic IP VSWR Input / Output (max.) DC Current @ 15 Volts (max.) Typical Measured.

AA280-25 : Digital Attenuator. GAAS ic 5 Bit Dig Attenuator 0.5 DB. Attenuation 0.5 dB Steps 15.5 dB with High Accuracy Low DC Power Consumption Low Cost SOIC-16 Plastic Package The a 5 bit, GaAs IC FET digital attenuator in a low cost SOIC-16 package. This attenuator has an LSB 0.5 dB and a total attenuation of 15.5 dB. The AA280-25 is particularly suited where high attenuation accuracy, low insertion loss and low intermodulation.

BX3005 : Frequency (MHz) = 100 - 450 ;; Gain (Typ/Min) (dB) = 16 / 14.5 ;; Noise Figure (Typ/Max) (dB) = 1.8 / 2 ;; P1dB Comp Point (Typ/Min) (dBm) = +13 / +11 ;; 3rd Order Intercept (Typ) (dBm) = +27 ;; 2nd Order Intercept (Typ) (dBm) = +39 ;; DC Power (Typ) (V/mA) = +15 / +25 ;; Package = Package = Package = 4 Pin TO-8 Package = Surface Mount Package = Flatpack.

BX9117 : Frequency (MHz) = 10 - 1000 ;; Gain (Typ/Min) (dB) = 12 / 10 ;; Noise Figure (Typ/Max) (dB) = 4 / 6 ;; P1dB Comp Point (Typ/Min) (dBm) = +15.5 / +14.5 ;; 3rd Order Intercept (Typ) (dBm) = +28 ;; 2nd Order Intercept (Typ) (dBm) = +40 ;; DC Power (Typ) (V/mA) = +15 / +46 ;; Package = Package = Package = 4 Pin TO-8 Package = Surface Mount Package = Flatpack.

DMF3926 : Chip on Board Mixer Quads. s High Volume Automatic Assembly s For Microwave MIC Assembly and Automated High Volume Manufacturing s Mechanically Rugged Design 100% DC Tested s Three Barrier Heights for Customized Mixer Performance Alpha's ceramic Chip on Board (COB) mixer quads are designed for high performance RF and microwave receiver applications. These devices utilize Alpha's.

LET21008 : Power. RF Power Transistors Ldmos Enhanced Technology in Plastic Package.

LQ801 : Power. Pout W = 30 ;; Freq MHZ = 1000 ;; Gain DB = 12 ;; Theta JC = 1.8 ;; GM Mho = 0.8 ;; Idsat a = 5.5 ;; Ciss PF = 30 ;; CRSS PF = 1 ;; Coss PF = 15 ;; Die = 1+1 ;; Style = Push - Pull ;; PKG = aq ;; = P ;; = a ;; = S.

MDS-222 :  Surface Mount Double-balanced Mixer, 200 KHZ - 200 MHZ. n Fully Hermetic Package n Three Decade Coverage n Impedance: 50 Ohms Nominal n Maximum Input Power: 400 mW Max @ 25C, Derated n linearly @ 3.2 mW/C X-Port Current: 50 mA Max. MIL-STD-883 Screening Available Transformers convert the LO and RF paths to balanced lines connecting to a low barrier, Schottky diode ring quad. These transformers help provide.

RF2046 : General Purpose Amplifier. Typical Applications Broadband, Low Noise Gain Blocks or RF Buffer Amplifiers Driver Stage for Power Amplifiers Product The is a general purpose, low cost RF amplifier IC. The device is manufactured on an advanced Gallium Arsenide Heterojunction Bipolar Transistor (HBT) process, and has been designed for use as an easily-cascadable 50 gain block. Applications.

HMC650 : WIDEBAND FIXED ATTENUATOR FAMILY, DC - 50 GHz HMC650 / 651 / 652 / 653 / 654 / 655 / 656 / 657 / 658 The HMC650 / 651 / 652 / 653 / 654 / 655 / 656 / 657 / 658 are a line of wideband i xed value 50 Ohm matched attenuator chips which offer relative attenuation levels of 0, 2, 3, 4, 6, 10, 15 and 20 dB. These passive though- lines and attenuators are ideal.

ADL5521 : 400 MHz 4000 MHz Low Noise Amplifier The ADL5521 is a high performance GaAs pHEMT low-noise amplifier. It provides high gain and low noise figure for single down-conversion IF sampling receiver architectures as well as direct down conversion receivers. The ADL5521 allows optimal noise matching without sacrificing significant gain matching. S11 of better.

MRF7S19210HR3 : RF Power Field Effect Transistors Designed for CDMA base station applications with frequencies from 1930 to 1990 MHz. Can be used in Class AB and Class C for all typical cellular base station modulations..

 
0-C     D-L     M-R     S-Z