Details, datasheet, quote on part number: SW-231
CategoryRF & Microwaves => Switches
Description Matched GAAS SPST Switch, 5 - 4000 MHZ
CompanyM/A-COM, Inc.
DatasheetDownload SW-231 datasheet
Find where to buy


Features, Applications

6 EQUAL SPACES 0.100 (2.54) TOLERANCE NON-CUMULATIVE 0.110 (2.79) TYP 0.325 (8.26) MIN CTL 0.500 RF1 ODD COLORED BEAD RF2

Low Insertion Loss: 1.0 dB Typ. Fast Switching Speed: 20 ns Typ. Ultra Low DC Power Consumption: 0.07 mA Typ. Integral TTL MIL-STD-883 Screening Available

Impedance Switching Characteristics t ON, tOFF (50% CTL to 90/10% RF) t ON, tOFF Transients (In- Band) Input Power for 1 dB Compression - 4000 MHz 50 MHz Intermodulation Intercept Point (for two-tone input power to +13 dBm) Intercept Points - 4000 MHz 50 MHz Bias Power +46 +40 dBm Typ dBm Typ 50 Ohms Nominal 7 ns Typ. 20 ns Typ. 70 mV Typ. + 27 dBm Typ. + 21 dBm Typ.

Dimensions ( ) are in mm. Unless Otherwise = ±0.010 (.xx = ±0.02 (.x = ±0.5) WEIGHT (APPROX.): 0.14 OUNCES 4 GRAMS

* All specifications apply when operated with bias voltages + 5 VDC. 50 ohm impedance at all RF ports.

Matched GaAs SPST Switch Typical Performance


Related products with the same datasheet
Some Part number from the same manufacture M/A-COM, Inc.
SW-231PIN  Matched GAAS SPST Switch, 5 - 4000 MHZ
SW-233  Matched GAAS SPDT Switch, 5 - 2000 MHZ
SW-233PIN Matched GAAS SPDT Switch 5-2000mhz
SW-236  Matched GAAS SPDT Switch, 5 - 2000 MHZ
SW-236PIN Matched GAAS SPDT Switch 5-2000mhz
SW-239  GaAs SPDT Switch
SW-239PIN GAAS SPDT Switch Dc-2.5 GHZ
SW-239RTR  GaAs SPDT Switch
SW-241  Matched GAAS SP3T Switch, 5 - 2000 MHZ
SW-254  Matched GAAS SP4T Switch, 5 - 2000 MHZ
SW-255  GaAs SP4T Switch, 5 - 2000 MHZ
SW-259  GaAs SPST Switch
SW-261  Matched GAAS SP4T Switch, 5 - 2000 MHZ
SW-262  GaAs SP4T Switch, 5 - 2000 MHZ
SW-276 DC-3 Ghz, High Power GAAS SPDT Switch
SW-277  High Power GAAS SPDT Switch
SW-283  GaAs Transfer Switch, DC - 3 GHZ
SW-284  GaAs Matched SP6T Switch, DC - 2 GHZ
Same catergory

1SV303 : VR (v) = 30 ;; Ir (nA) = 10 ;; CT(1) (pF) = 42 to 51 ;; CT(2) (pF) = 2.1 to 3.1 ;; CT(1)/CT(2) = 18 ;; .rs(Typ.) Ohms = 1.05 ;; Package = Esc ;; Application = UHF Tuning(bs 2nd C/V)(CATV).

AA210-25 : Digital Attenuator. GAAS ic 4 Bit Digital Attenuator 1 DB. Attenuation 1 dB Steps 15 dB with High Accuracy Low Intermodulation Products Low Cost SOIC-16 Plastic Package Low DC Power Consumption The an IC FET digital attenuator consisting of four monolithic attenuators with LSB 1 dB and a total attenuation 15 dB with all attenuators connected. Attenuator bits are switched with -5 and 0 V. The AA210-25 is particularly.

AH115 : . MHz +28 dBm P1dB +43 dBm Output 14 dB Gain @ 1960 MHz Single Positive Supply (+5 V) MTTF >100 Years SOIC-8 SMT Package The is a high dynamic range driver amplifier in a low-cost surface mount package. The InGaP/GaAs HBT is able to achieve high performance over a broad frequency range with +43 dBm OIP3 and +28 dBm of compressed 1-dB power and is housed.

AS137-12 : GAAS ic High Power SPDT Switch Positiv. GaAs IC High Power SPDT Switch Positive Control DC­2.5 GHz High Linearity (IP3 55 dBm @ 0.9 GHz) Low Insertion Loss @ 0.9 GHz) Low DC Power Consumption Positive 5 V Control Voltage The is a FET IC SPDT switch a SOIC-8 plastic package. This switch has been designed for use where extremely high linearity and low insertion loss are required. It is controlled.

AT-118 : Frequency 0.5-3 Ghz, 15dB, 3V Voltage Variable Absorptive Attenuator. Single Positive Control to 3 Volts 15 dB Voltage Variable Attenuation 2 dB Linearity from BSL Positive Control Logic Low Cost MSOP-8 Plastic Package M/A-COM's is a linear GaAs MMIC voltage variable absorptive attenuator in a low cost MSOP-8 surface mount plastic package. The AT-118 is ideally suited for applications where linear attenuation and fine.

AV102-12 : HIP3 Variable Attenuator 1.70 2.00 GHZ. +50 dBm IP3 Typical Low Loss 1 dB Typical Attenuation 30 dB Typical Good VSWR <1.5:1 Typical Small SOIC-8 Package The is a current controlled variable attenuator from Skyworks' series of HIP3TM components. It is designed to meet the wide dynamic range required in spread spectrum wireless base station applications. A monolithic quadrature hybrid is teamed.

BX6683 : Frequency (MHz) = 10 - 250 ;; Gain (Typ/Min) (dB) = 27.5 / 26.5 ;; Noise Figure (Typ/Max) (dB) = 2 / 3 ;; P1dB Comp Point (Typ/Min) (dBm) = -1 / -3 ;; 3rd Order Intercept (Typ) (dBm) = +10 ;; 2nd Order Intercept (Typ) (dBm) = +9 ;; DC Power (Typ) (V/mA) = +5 / +14 ;; Package = Package = Package = 4 Pin TO-8 Package = Surface Mount Package = Flatpack.

F2021 : Power. Pout W = 7.5 ;; Freq MHZ = 1000 ;; Gain DB = 10 ;; Theta JC = 5 ;; GM Mho = 0.6 ;; Idsat a = 3.6 ;; Ciss PF = 27 ;; CRSS PF = 3 ;; Coss PF = 18 ;; Die = 3 ;; Style = Single Ended ;; PKG = ap.

FMM5027VJ : MMICs->GaAs MMICs. L-band. Wide Frequency Band: to 3GHz Medium Power: - 3GHz High Linear Gain: GL=19dB (Typ.)@ - 3GHz Wide Operating Temperature Range Hermetically Sealed Package The is a MMIC power amplifier that includes three amplifier stages designed for applications in the to 3.0GHz frequency range. This product is uniquely suited for use in cellular, PCS/PCN, WLL base station.

INA-54063 : Bipolar. 5V Fixed Gain, Negative Gain Slope DBS if Amplifier. 3.0 GHz Low Noise Silicon MMIC Amplifier Technical Data Ultra-Miniature Package Single 5 V Supply (29 mA) 21.5 dB Gain (1.9 GHz) 8.0 dBm P1dB (1.9 GHz) Positive Gain Slope Unconditionally Stable Agilent's is a Silicon monolithic amplifier that offers excellent gain and power output for applications to 3.0 GHz. Packaged in an ultra-miniature SOT-363.

IP3524 : Regulating Pulse Width Modulators. INV. INPUT N. I. INPUT 2 OSC. OUTPUT 3 +C.L. SENSE 4 ­C.L. SENSE CT 7 GROUND 8 Guaranteed ±2% reference voltage tolerance Guaranteed ±6% oscillator tolerance Fully specified temperature performance Guaranteed 10mV/1000 hours long term stability Interchangeable with SG1524 series J Package ­ 16 Pin Ceramic DIP N Package ­ 16 Pin Plastic DIP D Package.

KGA4217L : Limiting Amplifier ic. KGA4217L, limiting Amplifier IC with µ m gate length GaAs MESFETs, has been designed for 10 Gb/s digital communication systems. By using DCFL(Direct Coupled FET Logic), high speed operation of 10 Gb/s and low power dissipation have been realized. Capacitive coupling is recommended for I/O connections. VDD Q DIN 5 50 VDD QN DIN: DR2: Q, QN: VDD: Data.

PD18-12 : Two-way 0 Power Splitter Combiner. Low Cost Low Profile Available in Small SOIC-8 Package Tape & Reel The is a monolithic two-way in-phase hybrid junction tuned for the 1.71­1.99 GHz band. It offers low loss, high isolation, good input/output matching and exceptional phase/amplitude balance. It is available in the SOIC-8 leaded surface mount package. Parameter Frequency Insertion Loss.

TGC1430F-EPU : = Doubler ;; Freq(GHz) = 20-40 ;; Conversion Gain(dB) = -12 ;; V+(V) = ;; IQ(mA) = ;; Status = Proto/mask.

VS-22 : Solid State Switch.

TRF1112 : Dual VCO/PLL Synthesizer With Downconverter The TRF1112 / TRF1212 are UHF-VHF down converters with integrated UHF and S-band frequency synthesizers for radio applications in the 2 GHz to 4 GHz range. The device integrates an image reject mixer, IF gain blocks, automatic gain control (AGC), and two complete phase locked loop (PLL) circuits including:.

ADL5375 : 400 MHz To 6 GHz Broadband Quadrature Modulator The ADL5375 is a broadband quadrature modulator designed for operation from 400 MHz to 6 GHz. Its excellent phase accuracy and amplitude balance enable high performance intermediate frequency or direct radio frequency modulation for commu- nication systems. The ADL5375 a broad baseband bandwidth, along.

AWT6243 : WCDMA Power Amplifiers The AWT6243 HELP3TM PA is a next generation WCDMA product for UMTS handsets. This PA incorporates ANADIGICS’ HELP3TM technology to provide low power consumption without the need for an external voltage regulator or DC/DC Converter. The AWT6243 is manufactured on an advanced InGaP HBT MMIC technology offering state-of-the-art reliability,.

HMC686LP4 : BiCMOS Mixer W/Integrated LO Amplifier, 700 - 1100 MHz The HMC686LP4(E) is a high dynamic range passive MMIC mixer with integrated LO amplifier in a 4x4 SMT QFN package covering 0.7 to 1.1 GHz. Excellent input IP3 performance of +34 dBm for down conversion is provided for 3G & 4G GSM/CDMA applications at an LO drive of 0 dBm. With an input 1 dB compression.

0-C     D-L     M-R     S-Z