Details, datasheet, quote on part number: SW-438
CategoryRF & Microwaves => Switches
Description GaAs SPDT Switch DC - 3.0 GHZ
CompanyM/A-COM, Inc.
DatasheetDownload SW-438 datasheet
Cross ref.Similar parts: UPG2009TB
Find where to buy


Features, Applications


Low Insertion Loss, @ 2.4 High Isolation, 2.4 GHz1 Low Power Consumption, +3 V Low Cost Plastic SOT-363 Package

For best results at 2.4 GHz, use pF 0402 profile SMT capacitors on RF ports and 100 pF bypassing on pins 4 and 6.


The is a GaAs MMIC SPDT switch in a low cost SOT-363 surface mount plastic package. Typical applications include transmit/receive switching for Bluetooth and WLAN equipment. The SW-438 can also be used in applications mW in systems such as cellular, PCS, DCS1800, GSM, CDMA and other analog and digital wireless communications systems. M/A-COM fabricates the SW-438 using a 0.5 micron gate length GaAs p-HEMT process. The process features full passivation for increased performance and reliability.

Pin No. 1 Function RF1 GND RF2 V2 RFC V1 Description RF Input/Output RF Ground RF Input/Output Control 2 Input RF Common Port Control 1 Input

Please note the values of the external capacitors. The capacitors at each of the RF ports are used as for achieving optimum insertion loss. They also provide DC blocking for positive control. The pF (0402) capacitor is recommended for - 3 GHz operation. If this value is changed or the capacitor placed too far from the switch, the performance will be affected. We also recommend 100 pF bypass capacitors on pins 4 and 6. For broadband applications with positive control voltages, use DC blocking capacitors with value pF or more.

Part Number SW-438TR-3000 SW-438SMB Package on 13 Inch, 3000 piece Reel SW-438 sample test board

External DC blocking capacitors are required on all RF ports. If negative control is used, DC blocking capacitors are not required on RF ports.

GaAs SPDT Switch, DC-3.0 GHz Electrical Specifications: 25C, 3V Control

Parameter Insertion Loss Isolation Test Conditions DC-3.0 GHz DC-1.0 GHz 1.0-2.0 GHz 2.0-3.0 GHz DC-1.5 GHz 1.5-3.0 GHz 500 MHz-2.0 GHz 500 MHz-2.0 GHz 2-tone 900 MHz, 5 MHz spacing 2-tone 900 MNz, 5 MHz spacing (2.3V) 2.4 GHz Pin = 20 dBm, 2.3V 2.4 GHz Pin = 20 dBm, 2.3V 50% ctl 90% RF |Vctl| = 5V Units dB dBm dBc ns A Min Typ

Return Loss (2.3 V supply) P1dB (3V supply) IP3 2nd Harmonic 3rd Harmonic Ton, Toff Trise, Tfall Gate Leakage

Specifications subject to change without notice. n North America: Tel. 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. 300 020

Visit for additional data sheets and product information.

Specifications subject to change without notice. n North America: Tel. 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. 300 020


Related products with the same datasheet
Some Part number from the same manufacture M/A-COM, Inc.
SW-438SMB  GaAs SPDT Switch DC - 3.0 GHZ
SW-439 DC-3 Ghz, GAAS High ISOlation Switch
SW-439PIN GAAS High ISOlation Switch DC - 3.0 GHZ
SW-439PIN DC-3 Ghz, GAAS High ISOlation Switch
SW-442 DC-3 Ghz, GAAS SPDT Terminated Switch
SW-442PIN GAAS SPDT Terminated Switch DC - 3.0 GHZ
SW-442PIN DC-3 Ghz, GAAS SPDT Terminated Switch
SW-444 2v Control Triple-band Gsm/dcs/pcs Sp5t Switch 0.5 . 2.0 GHZ
SW-456 DC-3 Ghz, GAAS SPDT Switch
SW-456TR3000 2v Control Triple-band Gsm/dcs/pcs Sp5t Switch 0.5 . 2.0 GHZ
SW-456TR3000 DC-3 Ghz, GAAS SPDT Switch
SW-461 800-900 Mhz, 4 X 6 RF Switch Matrix
SW-475 0.5-3 Ghz, SPDT High ISOlation Terminated Switch
SW-485 0.05-3 Ghz, GAAS SPDT Switch
SW-488 2 V Dual-mode Wcdma & Dual-band Gsm/dcs Switch 0.5 . 2.0 GHZ
SW-489  GaAs SP3T 2.5V High Power Switch DC - 2.5 GHZ
SW05-0311 DC-3 Ghz, Match GAAS SPST Absorptive Switch
SW10-0312 DC-3 Ghz, GAAS SPDT Reflective Switch

PH3135-5M : 3100-3500 Mhz, 5 W, 100 Ms, Radar Pulsed Power Transistor

EMRSL-5L : 5 MHz - 1500 MHz RF/MICROWAVE DOUBLE BALANCED MIXER, 9.5 dB CONVERSION LOSS-MAX Specifications: RF: 5 to 1500 MHz ; Conversion Loss: 9.5 dB ; Mixer Type: Double Balanced ; Operating Temperature: -55 to 100 C (-67 to 212 F)

MA44663D-31 : 20 GHz, SILICON, STEP RECOVERY DIODE Specifications: Configuration: Single ; Diode Applications: FREQUENCY MULTIPLIER ; Number of Diodes: 1 ; VBR: 60 volts ; CT: 0.7000 to 0.9000 pF



MASWSS0202TR-3000 : 0 MHz - 6000 MHz RF/MICROWAVE DIVERSITY SWITCH Specifications: Frequency Range: 0.0 to 6000 MHz ; Impedance: 50 ohms ; Package Type: DIE ; Operating Temperature: -40 to 85 C (-40 to 185 F)

MDC-178 : 2600 MHz - 5200 MHz RF/MICROWAVE DOUBLE BALANCED MIXER, 6 dB CONVERSION LOSS-MAX Specifications: RF: 2600 to 5200 MHz ; Conversion Loss: 6 dB ; Mixer Type: Double Balanced ; Operating Temperature: -55 to 85 C (-67 to 185 F)

ML2S200 : 2000 MHz - 2500 MHz RF/MICROWAVE ISOLATOR Specifications: Component: Isolator ; Frequency Range : 2000 to 2500 MHz ; Insertion Loss: 0.4000 dB ; VSWR: 1.3 1 ; Operating Temperature: 0.0 to 50 C (32 to 122 F)

MLA2645-502A3 : 3700 MHz - 4200 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER Specifications: Amplifier Type: Power Amplifier ; Applications: RF Microwave ; Frequency Range: 3700 to 4200 MHz ; Input VSWR: 1.8 1 ; Output VSWR: 1.8 1 ; Operating Temperature: -55 to 95 C (-67 to 203 F)

2669-1004-11 : 500 MHz - 2000 MHz RF/MICROWAVE SGL POLE TRIPLE THROW SWITCH, 1.1 dB INSERTION LOSS Specifications: Frequency Range: 500 to 2000 MHz ; Insertion Loss: 1.1 dB ; VSWR: 1.5 1 ; Type: SGL POLE TRIPLE THROW SWITCH ; Operating Temperature: -55 to 95 C (-67 to 203 F)

Same catergory

1SV306 : VR (v) = 15 ;; Ir (nA) = 3 ;; CT(1) (pF) = 14 to 16 ;; CT(2) (pF) = 5.5 to 6.5 ;; CT(1)/CT(2) = 2 ;; .rs(Typ.) Ohms = 0.2 ;; Package = Usq ;; Application = UHF Vco.

CR250DP : Phase Control SCR 250 Amperes Avg 200-400 Volts.

HMC287MS8 : Low Noise (LNA). GaAs MMIC LOW NOISE AMPLIFIER with AGC, - 2.5 GHz Gain: 21 dB Noise Figure: 2.5 dB Gain Adjustment: 30 dB Single Positive Supply: +3V No External Components Ultra Small Package: MSOP8G Typical Applications LNA for Spread Spectrum Applications: BLUETOOTH HomeRF 802.11 WLAN 2.5 GHz Radios The is a low cost Low Noise Amplifier (LNA) offering dB of gain.

KF836U : = Cellular Phone ;; Package = SC-33.

MD22-0002-MUC : 700-100 MHZ Surface Mount Mixer. Low Cost x 0.485" Surface Mount Package 4.5 dB Conversion Gain High Input Third Order Intercept Point Low LO Power: +5 dBm dB LO Leakage DC Supply +8 volts 75 mA Typical M/A-COM's is a low cost cellular band mixer preamp in a surface mount pc board package. This device offers conversion gain 5 dB and excellent input third order intercept point for an input.

MICRF005 : MICRF005 QwikRadio™ 900MHz UHF Receiver. The MICRF005 QwikRadioTM UHF receiver is a single-chip OOK (on-off keyed) receiver IC for remote wireless applications. This device is a true single-chip, "antenna-in, data-out" device. All RF and IF tuning is accomplished automatically within the IC which eliminates manual tuning production costs and results in a highly reliable, extremely low-cost.

PD55025S : Power. RF Power Transistors The Ldmost Plastic Family. EXCELLENT THERMAL STABILITY COMMON SOURCE CONFIGURATION POUT 25 W with 14.5 dB gain @ 500 MHz 12.5 V NEW RF PLASTIC PACKAGE The is a common source N-Channel, enhancement-mode lateral Field-Effect RF power transistor. It is designed for high gain, broad band commercial and industrial applications. It operates V in common source mode at frequencies to 1 GHz.

RF2948B : 2.4 GHZ Spread-spectrum Transceiver. Typical Applications IEEE 802.11b WLANs Wireless Residential Gateways Secure Communication Links Product High Speed Digital Links Wireless Security Digital Cordless Telephones The is a monolithic integrated circuit specifically designed for direct-sequence spread-spectrum systems operating in the 2.4GHz ISM band. The part includes: a direct conversion.

RFP-250-50TC : = Terminations ;; Size LXWXH = 0.975 X 0.375 X 0.21" ;; Packaging = Flanged ;; Frequency MHZ = 0-3000 ;; Power Handling Watts = 250.

TA200116 : Phase Control SCR ( 1600-1800 Amperes Avg 100-2200 Volts ).

tga1082 : 27- 32 GHZ 1.5 Watt Power Amplifier. 0.25 um pHEMT Technology 22 dB Nominal Gain 30GHz 1W Nominal Pout P1dB 1.5W Psat at 30GHz Bias 960 mA Chip Dimensions x 3.3mm The TriQuint is a three stage HPA MMIC design using TriQuint's proven 0.25 um Power pHEMT process. The TGA1082B is designed to support a variety of millimeter wave applications including point-to-point digital radio and LMDS/LMCS.

TGA9092 : 6 - 18 GHZ High Power Amp. Dual Channel Power Amplifier 0.25um pHEMT Technology 6-18 GHz Frequency Range 2.8 W/Channel Midband Pout 5.6 W Pout Combined 24 dB Nominal Gain Balanced In/Out for Low VSWR @ 1.2A per Channel Bias Product The TriQuint is a dual channel, threestage wide band HPA MMIC designed using TriQuint's proven 0.25 m Power pHEMT process to support a variety of high.

HMC602LP4E : 70 DB, Logarithmic Detector/Controller SMT, 1 - 8000 MHz The HMC602LP4(E) Logarithmic Detector/Controller converts RF signals at its input, to a proportional DC voltage at its output. The HMC602LP4(E) employ a successive compression topology which delivers extremely high dynamic range and conversion accuracy over a wide input frequency range. As the input.

CC1100E : Low-Power Sub-1GHz RF Transceiver For China And Japan Frequency Bands The CC1100E is a Sub-GHz high performance radio transceiver designed for very low power RF applications. It is intended for the Industrial, Scientific and Medical (ISM) and Short Range Device (SRD) frequency bands at 470-510 MHz and 950-960 MHz. The CC1100E is especially suited for wireless.

0-C     D-L     M-R     S-Z