Details, datasheet, quote on part number: SW-475TR
PartSW-475TR
CategoryRF & Microwaves => Switches
Description0.5-3 Ghz, SPDT High ISOlation Terminated Switch
CompanyM/A-COM, Inc.
DatasheetDownload SW-475TR datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Features

Positive Voltage Control +5 V) High Isolation (53 dB typ. @ 0.9 GHz, 50 dB typ @ 1.9 GHz) n 50-Ohm Internal Terminations n Low Insertion Loss (0.6 dB typ. @ 0.9 GHz, 0.7 dB typ. @ 1.9 GHz) 4 mm FQFP-N 16-Lead Package

Description

The M/A-COM SW-475 GaAs monolithic switch provides high isolation in a low-cost, plastic surface mount package. The SW-475 is ideal for applications across a broad range of frequencies including synthesizer switching, transmit / receive switching, switch matrices and filter banks in systems such as radio and cellular equipment, PCS, GPS, and fiber optic modules. M/A-COM fabricates the SW-475 using an 1.0-micron gate length MESFET process. The process features full chip passivation for performance and reliability.

Input IP2 Input IP3 TRISE, TFALL TON, TOFF Transients
SPDT High Isolation Terminated Switch, - 3.0 GHz Functional Schematic

2. External DC blocking capacitors required on all RF ports. We recommend 47 pF. 8.0 V. Logic Level VLO "0" = VHIGH 1" = Voltage Level 0.2 V

Pin (pad) Function RF2 GND V1 V2 GND RFC GND RF1 GND Description RF port RF ground RF ground Control 1 Control 2 RF ground RF port RF ground RF ground RF ground RF ground RF port RF ground RF ground RF ground RF ground RF ground

Parameter Max Input Power - 3.0 GHz) 3 V Control 5 V Control Operating Voltage Operating Temperature Storage Temperature +30 dBm +33 dBm +8.5 volts to +150C Absolute Maximum

4. Exceeding any one or combination of these limits may cause permanent damage.
The following precautions should be observed to avoid damage:

Gallium arsenide integrated circuits are ESD sensitive and can be damaged by static electricity. Use proper ESD precautions when handling these devices.

M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information.

2 n North America: Tel. 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. (1908) 574300

SPDT High Isolation Terminated Switch, - 3.0 GHz Typical Performance Curves

3 n North America: Tel. 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. (1908) 574300


 

Related products with the same datasheet
SW-475PIN
SW-475SMB
SW-475TR-3000
Some Part number from the same manufacture M/A-COM, Inc.
SW-475TR-3000 0.5-3 Ghz, SPDT High ISOlation Terminated Switch
SW-485 0.05-3 Ghz, GAAS SPDT Switch
SW-488 2 V Dual-mode Wcdma & Dual-band Gsm/dcs Switch 0.5 . 2.0 GHZ
SW-489  GaAs SP3T 2.5V High Power Switch DC - 2.5 GHZ
SW-493
SW05-0311 DC-3 Ghz, Match GAAS SPST Absorptive Switch
SW10-0312 DC-3 Ghz, GAAS SPDT Reflective Switch
SW10-0313 DC-3 Ghz, Matched GAAS SPDT Reflective Switch
SW15-0314 DC-3 Ghz, GAAS SP4T Absorptive Switch
SW65-0003 DC-2500 Mhz, GAAS SP8T Reflective Switch
SW65-0014 DC-3 Ghz, GAAS SPST Absorptive Switch With Asic Driver
SW65-0114 DC-3 Ghz, GAAS SPDT Absorptive Switch With Asic Driver
SW65-0214 DC-3 Ghz, GAAS SP3T Absorptive Switch With Asic Driver
SW65-0313 DC-3 Ghz, GAAS SP2T Absorptive Switch With Asic Driver
SW65-0314 DC-3 Ghz, GAAS SP4T Absorptive Switch With Asic Driver
SW65-0440
SW90-0001 DC-4 Ghz, GAAS SPST Switch, Absorptive, Single Supply
SW90-0002 DC-4 Ghz, GAAS SPDT Switch, Absorptive, Single Supply
SW90-0003 DC-4 Ghz, GAAS SP4T Switch, Absorptive, Single Supply
SW90-0004 DC-4 Ghz, GAAS SP6T Switch, Absorptive, Single Supply
SW90-0004A  GaAs SP6T Switch, Absorptive, Single Supply, DC - 4 GHZ

MA02303GJ-R13 : LNAs  RF Power Amplifier ic For 2.4 GHZ Ism

T-1000N :  Two-Way Power Splitter/Combiner, 10 - 1000MHz

ESMD-C1LHTR : 1 MHz - 1000 MHz RF/MICROWAVE DOUBLE BALANCED MIXER, 9.5 dB CONVERSION LOSS-MAX Specifications: Package Type: Surface Mount, SM-2, 5 PIN ; RF: 1 to 1000 MHz ; Conversion Loss: 9.5 dB ; Mixer Type: Double Balanced ; Operating Temperature: -55 to 100 C (-67 to 212 F)

MA44714A-2 : K BAND, 8 GHz, SILICON, STEP RECOVERY DIODE Specifications: Configuration: Single ; Pin Count: 2 ; Number of Diodes: 1 ; VBR: 60 volts ; CT: 1.5 to 2.5 pF

MA4E978M-272 : SILICON, MEDIUM BARRIER SCHOTTKY, C-X BAND, MIXER DIODE Specifications: Arrangement: Common Catode ; Diode Type: MIXER DIODE ; Diode Applications: Mixer ; Package: BEAM LEAD PACKAGE-3 ; Pin Count: 3 ; Number of Diodes: 2

ML4669P-144 : 200 V, SILICON, PIN DIODE Specifications: Number of Diodes: 1

ML48705E-91 : mm WAVE BAND, 15 V, GALLIUM ARSENIDE, ABRUPT VARIABLE CAPACITANCE DIODE Specifications: Diode Type: VARIABLE CAPACITANCE DIODE

2953-1001 : 500 MHz - 2000 MHz RF/MICROWAVE SGL POLE SGL THROW SWITCH, 0.7 dB INSERTION LOSS Specifications: Frequency Range: 500 to 2000 MHz ; Insertion Loss: 0.7000 dB ; VSWR: 1.5 1 ; Type: Single Pole Single Throw ; Operating Temperature: -55 to 95 C (-67 to 203 F)

 
0-C     D-L     M-R     S-Z