|Category||RF & Microwaves => Transformers|
|Description||RF Pulse Transformer, 750 KHZ - 400 MHZ|
|Datasheet||Download TP-104 datasheet
50 Ohms Unbalanced/200 Ohms Balanced Low Insertion Loss: 0.4 dB Typical DC Isolation: Input to Output MIL-STD-202 Screening AvailableDescription
The flux coupled Balun Transformer can provide a wide range of impedance ratios: 4:1, 9:1 and 16:1 are most common. DC isolation from primary coil to secondary coil is also a feature of this device.
Parameter Impedance Insertion Loss VSWR Input Power Rise Time Droop Test Conditions Input - 50 Ohms Unbalanced Output - 200 Ohms Balanced Frequency - 50 MHz - 200 MHz 750 KHz - 400 MHz 750 KHz - 4 MHz - 400 MHz Units dB Ratio Watts nS Min Typ 0.55 130 Max
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. Visit www.macom.com for additional data sheets and product information.
2 n North America: Tel. 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. 300 020
|Related products with the same datasheet|
|Some Part number from the same manufacture M/A-COM, Inc.|
|TP-104PIN RF Pulse Transformer, 750 KHZ - 400 MHZ|
|TP-105 RF Pulse Transformer|
|TP-108 RF Transformer, 350 - 1125 MHZ|
|TP-75 50/75-Ohm Transformer|
|TP-75N 50/75-ohm Transformer 2 - 200 MHZ|
|TP-75SMA 50/75-Ohm Transformer|
|TPX-75-4N 50/75-ohm Transformer 10 - 1500 MHZ|
|TU-50 Two-Way Power Splitter/Combiner, 2 - 200MHz|
|TU-50BNC Two-way Power Dividers 2 - 200 MHZ And 20 - 400 MHZ|
|TU-50N Two-Way Power Splitter/Combiner, 2 - 200MHz|
|UF2805B 100-500 Mhz, 5 W, 28 V, RF MOSFET Power Transistor|
|UF28100H 100-500 Mhz, 100 W, 28 V, RF MOSFET Power Transistor|
|UF2810P 100-500 Mhz, 10 W, 28 V, RF MOSFET Power Transistor|
|UF28150J 100-500 Mhz, 150 W, 28 V, MOSFET Power Transistor|
|UF28156 RF MOSFET Power Transistor, 15w, 28v 100 - 500 MHZ|
|UF2815B 100-500 Mhz, 15 W, 28 V, RF MOSFET Power Transistor|
|UF281OOH RF MOSFET Power Transistor, 100w, 28v 100 - 500 MHZ|
|UF281OOM RF MOSFET Power Transistor, Loow, 28v 100 - 500 MHZ|
10025-3 : = 90° / 180° Hybrid Couplers ;; Size LXWXH = 3.0 X 1.75 X 0.5" ;; Packaging = Aluminum Cased ;; Frequency MHZ = 1000-4000 ;; Power Handling Watts = 100.
1SV304 : VR (v) = 10 ;; Ir (nA) = 3 ;; CT(1) (pF) = 17.3 to 19.3 ;; CT(2) (pF) = 5.3 to 6.6 ;; CT(1)/CT(2) = 3 TYP ;; .rs(Typ.) Ohms = 0.27 ;; Package = Usc ;; Application = UHF Vco.
3SK294 : RF Dual Gate FETs. VDS VGDS (VGDO) (V) = 12.5 ;; Id (mA) = 30 ;; PD (mW) = 100 ;; Idss (mA) = 0 to 0.1 ;; Yfs(Typ.) @1kHz (mS) = 23.5 ;; GRS(GCS*)/NF(NFCS*) (Typ.) (dB/dB) = 21.5/1.8 ;; Package = Usq ;; Application = FM RF, Mixer.
AT-255 : 3 Volt Voltage Variable Absorptive Attenuator, 25 DB. Single Voltage Control to -3 Volts 25 dB Attenuation Range at 0.9 GHz Low DC Power Consumption Low Cost SOT-25 Plastic Package Tape and Reel Packaging Available M/A-COM's is a GaAs MMIC voltage variable absorptive attenuator in a low cost SOT-25 surface mount plastic package. The AT-255 is ideally suited for use where variable attenuation fine tuning.
AT-273 : Digital Attenuator, 32 DB, 2-Bit, TTL Driver, DC - 2.0 GHZ. Attenuation: 16.0 dB Steps 32 dB Low DC Power Consumption Hermetic Surface Mount Package Integral TTL Driver 50 ohm Impedance Temperature Stability: ±0.18 dB from to +85°C Typ. n Tape and Reel Packaging Available M/A-COM's is a GaAs FET digital attenuator with 16.0 dB minimum step size and 32 dB total attenuation range. This attenuator and integral.
BX5138 : Frequency (MHz) = 5 - 150 ;; Gain (Typ/Min) (dB) = 15 / 14 ;; Noise Figure (Typ/Max) (dB) = 2.7 / 3.5 ;; P1dB Comp Point (Typ/Min) (dBm) = +24.5 / +22 ;; 3rd Order Intercept (Typ) (dBm) = +38 ;; 2nd Order Intercept (Typ) (dBm) = +46 ;; DC Power (Typ) (V/mA) = +15 / +88 ;; Package = Package = Package = 4 Pin TO-8 Package = Surface Mount Package = Flatpack.
BX7104 : Frequency (MHz) = 5 - 150 ;; Gain (Typ/Min) (dB) = 24 / 22.5 ;; Noise Figure (Typ/Max) (dB) = 1.9 / 2.5 ;; P1dB Comp Point (Typ/Min) (dBm) = +12 / +10.5 ;; 3rd Order Intercept (Typ) (dBm) = +25 ;; 2nd Order Intercept (Typ) (dBm) = +31 ;; DC Power (Typ) (V/mA) = +5 / +20 ;; Package = Package = Package = 4 Pin TO-8 Package = Surface Mount Package = Flatpack.
F1240 : Power. Pout W = 40 ;; Freq MHZ = 175 ;; Gain DB = 10 ;; Theta JC = 1.5 ;; GM Mho = 2.4 ;; Idsat a = 22.5 ;; Ciss PF = 120 ;; CRSS PF = 18 ;; Coss PF = 90 ;; Die = 3 ;; Style = Single Ended ;; PKG = at.
HMC219MS8 : +13 LO, Dbl-bal. Ultra Small Package: MSOP8 Conversion Loss: / RF Isolation: 25 dB Typical Applications The HMC219MS8 is ideal for: UNII & HiperLAN ISM Microwave Radios The is an ultra miniature doublebalanced mixer an 8 lead plastic surface mount package (MSOP). This passive MMIC mixer is constructed of GaAs Schottky diodes and novel planar transformer baluns on the chip.
LP3000/LPV3000 : 2w Power Phemt. +33.5 dBm Typical Power at 18 GHz 7 dB Typical Power Gain at 18 GHz +30.5 dBm at 3.3V Battery Voltage Low Intermodulation Distortion 45% Power-Added-Efficiency at 18 GHz DIE SIZE: x 16.5 mils x 420 µm) DIE THICKNESS: 2.6 mils (65 µm typ.) BONDING PADS: x 2.4 mils 60 µm typ.) The is an Aluminum Gallium Arsenide / Indium Gallium Arsenide (AlGaAs/InGaAs).
RMDA00400 : MMIC->Modulator Driver. Circuit = OC-768 Modulator Driver Mmic ;; Frequency = 0-43 GHZ.
SD1275 : VHF Transistors. VHF Mobile Applications RF & Microwave Transistors. 160 MHz 13.6 VOLTS COMMON EMITTER POUT 40 W MIN. WITH 9.0 dB GAIN .380 4L STUD (M135) epoxy sealed ORDER CODE SD1275 BRANDING SD1275 The 13.6 V Class C epitaxial silicon NPN planar transistor designed primarily for VHF communications. The SD1275 utilizes an emitter ballasted die geometry to withstand severe load mismatch conditions. ABSOLUTE MAXIMUM.
SD1446 : VHF Transistors. Hf/vhf Applications RF & Microwave Transistors. 50 MHz 12.5 VOLTS EFFICIENCY 55% COMMON EMITTER GOLD METALLIZATION POUT 70 W MIN. WITH 10 dB GAIN The 12.5 V Class C epitaxial silicon NPN planar transistor designed primarily for land mobile transmitter applications. This device utilizes emitter ballasting and is extremely stable and capable of withstanding high VSWR under operating conditions. ABSOLUTE.
TIM0910-10 : X, Ku-Band Power GaAs IMFETs. Frequency Band (GHz) = 9.5-10.5 ;; P1dB (dBm) = 40.5 ;; G1dB (dB) = 6.0 ;; P.A.E. (%) Typ. = 23 ;; VDS (V) = 9 ;; Ids (A) Typ. = 4.0 ;; IM3 (dBc) Typ. = - ;; RTH ( C/W) Typ. = 2.0.
TMXS143 : FC MHZ = 869.0 ;; Minb DB = -1000.0 ;; Minb MHZ = -1000.0 ;; Maxb DB = -1000.0 ;; Maxb MHZ = -1000.0 ;; Typical il DB = 2.4 ;; Package Mm2 = 3.0 X 3.0 ;; Type Package = SMT Package ;; Configuration Input/output = Single/single ;; Comments = Ism ;; = Subscriber ;; = ;; =.
INA209 : High-Side Measurement, Bi-Directional Current/Power Monitor with I2C Interface The INA209 is a high-side current shunt and power monitor with an I2C interface. The INA209 monitors both shunt drop and shunt bus voltage. A programmable calibration value, combined with an internal multiplier, enables direct readouts in amperes. An additional multiplying.
CC2510F8 : 2.4 GHz Radio Transceiver, 8051 MCU and 8 kB Flash memory The CC2510Fx/CC2511Fx is a true low-cost 2.4 GHz system-on-chip (SoC) designed for lowpower wireless applications. The CC2510Fx/CC2511Fx combines the excellent performance of the state-of-the-art RF transceiver CC2500 with an industry-standard enhanced 8051 MCU, up to 32 kB of in-system programmable.
SST12LF01 : 2.4 GHz Front-End Module The SST12LF01 is a 2.4 GHz Front-End Module (FEM) that combines a high-performance Low-Noise Amplifier (LNA) and a Power Amplifier (PA). Designed in compliance with IEEE 802.11 b/g applications and based on GaAs PHEMT/HBT technology, the SST12LF01 operates within the frequency range of 2.4– 2.55 GHz at a very low DC-current.
MRF7S19210HR3 : RF Power Field Effect Transistors Designed for CDMA base station applications with frequencies from 1930 to 1990 MHz. Can be used in Class AB and Class C for all typical cellular base station modulations..
HT6220A : Multi-Purpose Encoders The devices are CMOS LSI encoders designed for use in remote control systems. They are capable of encoding 16-bit address codes and 8-bit data codes. Each address/data input can be set to one of the two logic states, 0 and 1. The HT6220A/HT6221A/HT6222A contain 30keys (K1~K16, K17~K20, K33~K34, K37~K38, K41~K42, K45~K46, K49~K50),.