|
|
Part: DG406D
Category:
Communication
-> Network
-> Switches
-> Switches/Multiplexers
Description: Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers
Company: Maxim Integrated Products
Datasheet: Download DG406D datasheet File size : 304 kB
Request For quote: Find where to buy DG406D
Datasheet text preview:
19-4729; Rev 3; 6/99
Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers
_______________General Description
Maxim's redesigned DG406 and DG407 CMOS analog multiplexers now feature guaranteed matching between channels (8 max) and flatness over the specified signal range (9 max). These low on-resistance muxes (100 max) conduct equally well in either direction and feature guaranteed low charge injection (15pC max). In addition, these new muxes offer low input off-leakage current over temperature--less than 5nA at +85°C. The DG406 is a 1 of 16 multiplexer/demultiplexer and the DG407 is a dual 8-channel multiplexer/demultiplexer. Both muxes operate with a +4.5V to +30V single supply and with ±4.5V to ±20V dual supplies. ESD protection is guaranteed to be greater than 2000V per Method 3015.7 of MIL-STD 883. These improved muxes are pin-compatible plug-in upgrades for the industry standard DG406 and DG407.
____________________________Features
o Pin-Compatible Plug-In Upgrade for Industry Standard DG406/DG407 o Guaranteed Matching Between Channels, 8 Max o Guaranteed On-Resistance Flatness, 9 Max o Guaranteed Low Charge Injection, 15pC Max o Low On-Resistance 100 Max o Input Leakage, 5nA Max at +85°C o Low Power Consumption, 1.25mW Max o Rail-to-Rail Signal Handling o Digital Input Controls TTL/CMOS Compatible o ESD Protection >2000V per Method 3015.7
DG406/DG407
______________Ordering Information
PART DG406CJ DG406CWI DG406C/D DG406DJ DG406DWI DG406DN DG406AK TEMP. RANGE 0°C to +70°C 0°C to +70°C 0°C to +70°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -55°C to +125°C PIN-PACKAGE 28 Plastic DIP 28 Wide SO Dice* 28 Plastic DIP 28 Wide SO 28 PLCC 28 CERDIP
________________________Applications
Sample-and-Hold Circuits Test Equipment Guidance and Control Systems Communications Systems Data-Acquisition Systems Audio Signal Routing
Ordering Information continued at end of data sheet. * Contact factory for dice specifications.
_________________Pin Configurations
TOP VIEW
V+ 1 N.C. 2 N.C. 3 S16 4 S15 5 S14 6 S13 7 S12 8 S11 9 S10 10 S9 11 GND 12 N.C. 13 A3 14 DG407 at end of data sheet. DIP/SO 28 D 27 V26 S8 25 S7 24 S6
_______________Functional Diagrams
V+ S1 S2 S3 S4 S5 S6 S7 S8 S9 S10 S11 S12 S13 S14 S15 S16 CMOS DECODERS/DRIVERS VGND
DG406
23 S5 22 S4 21 S3 20 S2 19 S1 18 EN 17 A0 16 A1 15 A2
D
A0
A1
A2
A3
EN
DG406 16-CHANNEL SINGLE-ENDED MULTIPLEXER
DG407 at end of data sheet.
________________________________________________________________ Maxim Integrated Products
1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800. For small orders, phone 1-800-835-8769.
Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers DG406/DG407
ABSOLUTE MAXIMUM RATINGS
Voltage Referenced to VV+ ..........-0.3V, 44V GND .......-0.3V, 25V Digital Inputs, S, D (Note 1)...........(V- - 2V) to (V+ + 2V) or 30mA (whichever occurs first) Continuous Current (any terminal) .....30mA Peak Current, S or D (pulsed at 1ms, 10% duty cycle max) ..100mA Continuous Power Dissipation (TA = +70°C) Plastic DIP (derate 9.09mW/°C above +70°C) ...727mW Note 1: Wide SO (derate 12.50mW/°C above +70°C)...1000mW PLCC (derate 10.53mW/°C above +70°C) .........842mW CERDIP (derate 16.67mW/°C above +70°C) ....1333mW Operating Temperature Ranges DG406/DG407C_ .....0°C to +70°C DG406/DG407D_ ...........-40°C to +85°C DG406/DG407AK .........-55°C to +125°C Storage Temperature Range .....-65°C to +150°C Lead Temperature (soldering, 10sec) .....+300°C
Signals on S_, D_, A0, A1, A2, A3, or EN exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum current ratings.
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS--Dual Supplies
(V+ = 15V, V- = -15V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER SWITCH Analog Signal Range Drain-Source On-Resistance On-Resistance Matching Between Channels On-Resistance Flatness Source-Off Leakage Current (Note 5) VANALOG rDS(ON) rDS(ON) rFLAT (Note 3) IS = -1.0mA, VD = ±10V IS = -1.0mA, VD = ±10V (Note 4) IS = -1.0mA, VD = ±5V or 0V VD = +10V, VS = ±10V, VEN = 0V VD = ±10V, VS = +10V, VEN = 0V ID(OFF) VD = +10V, VS = ±10V, VEN = 0V DG407 TA = +25°C TA = TMIN to TMAX TA = +25°C TA = TMIN to TMAX TA = +25°C TA = TMIN to TMAX TA = +25°C TA = TMIN to TMAX TA = +25°C DG406 TA = TMIN to TMAX TA = +25°C TA = TMIN to TMAX TA = +25°C Drain-On Leakage Current (Note 5) ID(ON) + IS(ON) VD = ±10V, VS = ±10V, sequence each switch on DG406 TA = TMIN to TMAX TA = +25°C DG407 TA = TMIN to TMAX C, D A C, D A C, D A C, D A C, D A -0.5 -5 -50 -1 -40 -200 -1 -20 -100 -1 -40 -200 -1 -20 -100 0.02 0.02 0.02 0.02 0.01 1.8 1.5 -15 60 15 100 125 8 10 9 12 0.5 5 50 1 40 200 1 20 100 1 40 200 1 20 100 nA nA nA V SYMBOL CONDITIONS MIN TYP MAX (Note 2) UNITS
IS(OFF)
Drain-Off Leakage Current (Note 5)
2
_______________________________________________________________________________________
Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers
ELECTRICAL CHARACTERISTICS--Dual Supplies (continued)
(V+ = 15V, V- = -15V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER INPUT Input Current with Input Voltage High Input Current with Input Voltage Low SUPPLY Power-Supply Range VEN = VA = 0V or 4.5V Positive Supply Current I+ VEN = 2.4V, VA(ALL) = 0V or 2.4V VEN = 2.4V, VA(ALL) = 0V or 2.4V TA = +25°C TA = TMIN to TMAX TA = +25°C TA = TMIN to TMAX TA = +25°C TA = TMIN to TMAX TA = +25°C TA = TMIN to TMAX TA = +25°C TA = +25°C TA = TMIN to TMAX TA = +25°C TA = TMIN to TMAX TA = +25°C IAH IAL VA = 2.4V or 15V VEN = 0V or 2.4V, VA = 0V -1.0 -1.0 1.0 1.0 µA µA SYMBOL CONDITIONS MIN TYP MAX (Note 2) UNITS
DG406/DG407
±4.5 16 0.075 -1 -10 110 10 40 130 55
Negative Supply Current DYNAMIC Transition Time Break-Before-Make Interval Enable Turn-On Time Enable Turn-Off Time Charge Injection (Note 3) Off Isolation (Note 6)
I-
±20 30 75 0.5 1 1 10 300 400 200 400 150 300 15
V µA mA µA
tTRANS tOPEN tON(EN) tOFF(EN)
Figure 2 Figure 4 Figure 3 Figure 3 CL = 1.0nF, VS = 0V, RS = 0, Figure 5 VEN = 0V, RL = 1k, f = 100kHz, Figure 6 VEN = 2.4V, f = 100kHz, VGEN = 1VP-P, RL = 1k, Figure 7 f = 1MHz f = 1MHz, VEN = VS = 0V, Figure 8 f = 1MHz, VEN = 0.8V, VD = 0V, Figure 8 f = 1MHz, VEN = 2.4V, VD = 0V, Figure 8 DG406
ns ns ns ns
Q
2
pC
VISO
TA = +25°C
-69
dB
Crosstalk Between Channels
VCT CIN CS(OFF)
TA = +25°C TA = +25°C TA = +25°C
-92
dB
Logic Input Capacitance Source-Off Capacitance
8 8 130
pF pF
Drain-Off Capacitance
CD(OFF)
TA = +25°C DG407 DG406 TA = +25°C DG407 70 65 140
pF
Drain-Source On Capacitance
CD(ON) + CS(ON)
pF
_______________________________________________________________________________________
3
Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers DG406/DG407
ELECTRICAL CHARACTERISTICS--Single Supply
(V+ = 12V, V- = 0V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER SWITCH Analog Signal Range Drain-Source On-Resistance DYNAMIC Transition Time (Note 3) Enable Turn-On Time (Note 3) Enable Turn-Off Time (Note 3) Charge Injection (Note 3) tTRANS VS1 = 8V, VS16 = 0V, VA = 0V, Figure 2 VAL = 0V, VS1 = 5V, Figure 3 VAL = 0V, VS1 = 5V, Figure 3 CL = 1.0nF, VS1 = 0V, RS = 0 TA = +25°C 130 450 ns VANALOG rDS(ON) (Note 3) Is = -1.0mA VD = 3V or 10V TA = +25°C 0 120 12 175 V SYMBOL CONDITIONS MIN TYP MAX (Note 2) UNITS
tON(EN)
TA = +25°C
105
600
ns
tOFF(EN)
TA = +25°C
80
300
ns
Q
TA = +25°C
2
10
pC
Note 2: The algebraic convention where the most negative value is a minimum and the most positive value a maximum is used in this data sheet. Note 3: Guaranteed by design. Note 4: RON = RON(MAX) - RON(MIN). On-resistance match between channels and flatness are guaranteed only with specified voltages. Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured at the extremes of the specified analog signal range. Note 5: Leakage parameters are 100% tested at the maximum rated hot temperature and guaranteed by correlation at +25°C. Note 6: Off isolation = 20log VD/VS, where VD = output and VS = input to off switch.
4
_______________________________________________________________________________________
Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers DG406/DG407
__________________________________________Typical Operating Characteristics
(TA = +25°C, unless otherwise noted.)
ON-RESISTANCE vs. VD (DUAL SUPPLIES)
DG406/7 TOC-01
ON-RESISTANCE vs. VD AND TEMPERATURE (DUAL SUPPLIES)
DG406/7 TOC-02
ON-RESISTANCE vs. VD (SINGLE SUPPLY)
360 320
DG406/7 TOC-03
160 140 ±5V 120 rDS (ON) () 100 80 60 40 20 0 -20 -15 -10 -5 0 VD (V) 5 10 15 ±15V ±20V ±10V
120 100 80 rDS (ON) () 60 40 20 0
400
V+ = 15V V- = -15V
+125°C +85°C +25°C -55°C rDS (ON) ()
280 5V 240 200 160 120 80 40 10V 15V 20V 0 5 10 VD (V) 15 20
20
-15
-10
-5
0 VD (V)
5
10
15
ON-RESISTANCE vs. VD AND TEMPERATURE (SINGLE SUPPLY)
DG406/7 TOC-04
OFF LEAKAGE vs. TEMPERATURE
V+ = 15V V- = -15V
DG406/7 TOC-05
ON LEAKAGE vs. TEMPERATURE
V+ = 15V V- = -15V
DG406/7 TOC-06
160 140 120 rDS (ON) () 100 80 60 40 20 0 0 5 VD (V) 10 -55°C V+ = 15V V- = 0V +125°C +85°C +25°C
1000 100 OFF LEAKAGE (nA) 10 1 0.1 0.01 0.001 0.0001 ICOM (ON)
1000 100 ON LEAKAGE (nA) 10 1 0.1 0.01
INO (OFF) 0.001 0.0001 -55 -35 -15 5 25 45 65 85 105 125 -55 -35 -15 5
ICOM (ON)
15
25 45
65
85 105 125
TEMPERATURE (°C)
TEMPERATURE (°C)
CHARGE INJECTION vs. VD
DG406/7 TOC-07
SUPPLY CURRENT vs. TEMPERATURE
I+ 10
DG406/7 TOC-08
30 20 10 Qj (pC) 0 -10 -20 -30 -15 -10 -5 0 VD (V) 5 10 V+ = 12V V- = 0V V+ = 15V V- = -15V
100
I+, I- (µA)
1
0.1 I0.01 V+ = +15V V- = -15V VEN = VA = 0V, 4.5V -55 -35 -15 5 25 45 65 85 105 125
0.001 15 TEMPERATURE (°C)
_______________________________________________________________________________________
5
Others parts begin by dg
|
|
|
