|
|
Part: MAX1927R
Category:
Power Management
-> Battery Management
Description: MAX1927, MAX1928 Low-Output-Voltage, 800mA, PWM Step-down DC-DC Converters
Company: Maxim Integrated Products
Datasheet: Download MAX1927R datasheet File size : 649 kB
Request For quote: Find where to buy MAX1927R
Datasheet text preview:
19-2527; Rev 0; 7/02
Low-Output-Voltage, 800mA, PWM Step-Down DC-DC Converters
General Description
The MAX1927/MAX1928 800mA step-down converters power low-voltage microprocessors in compact equipm e n t requiring the highest possible efficiency. The MAX1927/MAX1928 are optimized for generating low o u t p u t voltages (down to 750mV) at high efficiency using small external components. The supply voltage range is from 2.6V to 5.5V and the guaranteed minimum output current is 800mA. 1MHz pulse-width modulation (PWM) switching allows for small external components. A unique control scheme minimizes ripple at light loads, while maintaining a low 140µA quiescent current. The MAX1927/MAX1928 include a low on-resistance internal MOSFET switch and synchronous rectifier to maximize efficiency and minimize external component count. No external diode is needed. 100% duty-cycle operation allows for a dropout voltage of only 340mV at 8 0 0 m A . Other features include internal soft-start, power-OK (POK) output, and selectable forced PWM operation for lower noise at all load currents. The MAX1928 is available with several preset output voltages: 1.5V (MAX1928-15), 1.8V (MAX1928-18), and 2.5V (MAX1928-25). The MAX1927R has adjustable output range down to 0.75V. The MAX1927/MAX1928 are available in a tiny 10-pin µMAX package. o 800mA Output Current o Output Voltages from 0.75V to 5V o 2.6V to 5.5V Input Voltage Range o Power-OK Output o No Schottky Diode Required o Selectable Forced PWM Operation o 1MHz Fixed-Frequency PWM Operation o 140µA Quiescent Current o Soft-Start o 10-Pin µMAX Package
Features
MAX1927/MAX1928
Ordering Information
PART MAX1927REUB PRESET TEMP PINOUTPUT PACKAGE RANGE VOLTAGE Adj. to 0.75V -40°C to +85°C 10 µMAX 1.5V 1.8V 2.5V -40°C to +85°C 10 µMAX -40°C to +85°C 10 µMAX -40°C to +85°C 10 µMAX
Applications
WCDMA Handsets PDAs and Palmtops DSP Core Power Battery-Powered Equipment
MAX1928EUB15 MAX1928EUB18 MAX1928EUB25
Pin Configuration
TOP VIEW
PWM 1 GND REF FB COMP 2 3 4 5 10 POK 9 BATT
VIN 2.6V TO 5.5V
Typical Operating Circuit
PWM L1 LX SHDN RC COMP CC Cf FB C2 VOUT 0.75V AT 800mA
BATT C1
MAX1927R MAX1928
8 LX 7 PGND 6 SHDN
MAX1927R
POK
µMAX
REF
PGND GND
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.
Low-Output-Voltage, 800mA, PWM Step-Down DC-DC Converters MAX1927/MAX1928
ABSOLUTE MAXIMUM RATINGS
BATT, PWM, POK, COMP, SHDN to GND ......-0.3V to +6V PGND to GND .......-0.3V to +0.3V LX, REF, FB to GND ........-0.3V to (VBATT + 0.3V) Continuous Power Dissipation (TA = +70°C) 10-Pin µMAX (derate 5.6mW/°C above +70°C) ..444mW Operating Temperature Range ...-40°C to +85°C Junction Temperature ......+150°C Storage Temperature Range .....-65°C to +150°C Lead Temperature (soldering, 10s) .........+300°C
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VBATT = 3.6V, SHDN = BATT, CREF = 0.1µF, TA = 0°C to +85°C, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER BATT Input Voltage Undervoltage Lockout Threshold Quiescent Current Quiescent Current in Dropout Shutdown Supply Current REFERENCE AND ERROR AMP MAX1927R FB Voltage Accuracy MAX1928-15 MAX1928-18 MAX1928-25 FB Input Current MAX1928 MAX1927R MAX1927R MAX1928-15 MAX1928-18 MAX1928-25 1.231 2.6V < VBATT < 5.5V VBATT = 3.6V VBATT = 2.6V VBATT = 3.6V VBATT = 2.6V 1.1 0.11 0.738 1.477 1.773 2.462 5 0.75 1.5 1.8 2.5 10 10 250 210 175 125 1.25 0.5 0.25 0.3 0.17 0.2 0.48 1.3 0.13 -0.55 1.6 0.15 0.762 1.523 1.827 2.538 15 150 µA nA V SHDN = GND VBATT rising or falling (35mV hysteresis) No load, pulse skipping, PWM = GND 1MHz switching CONDITIONS MIN 2.6 2.15 2.35 140 2 190 0.1 340 10 TYP MAX 5.5 2.55 240 UNITS V V µA mA µA µA
Transconductance (gm)
µS
Reference Voltage Accuracy Reference Supply Rejection PWM CONTROLLER P-Channel On-Resistance N-Channel On-Resistance Current-Sense Transresistance (RCS ) P-Channel Current-Limit Threshold P-Channel Pulse-Skipping Current Threshold N-Channel Negative Current-Limit Threshold
1.269 2 0.4 0.5 0.3 0.35
V mV
V/A A A A
2
_______________________________________________________________________________________
Low-Output-Voltage, 800mA, PWM Step-Down DC-DC Converters
ELECTRICAL CHARACTERISTICS (continued)
(VBATT = 3.6V, SHDN = BATT, CREF = 0.1µF, TA = 0°C to +85°C, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER N-Channel Synchronous Rectifier Turn-Off Threshold LX Leakage Current Maximum Duty Cycle Minimum Duty Cycle Internal Oscillator Frequency Thermal Shutdown Threshold POK COMPARATOR BATT Operating Voltage Range Output Low Voltage Output High Leakage Current IPOK = 0.1 mA VFB = 0.5V, IPOK = 1mA VPOK = 5.5V MAX1927R POK Threshold MAX1928-15 MAX1928-18 MAX1928-25 Output Valid to POK Release Delay LOGIC INPUTS (SHDN, PWM) Logic Input High Logic Input Low Logic Input Current 2.6V VPOK 0.650 1.305 1.566 2.175 15 0.675 1.350 1.620 2.250 20 1 0.01 5.5 0.1 1 0.700 1.395 1.674 2.325 25 ms V V V µA 15°C hysteresis PWM = GND PWM = BATT 0.85 15 1 160 1.15 VBATT = 5.5V, LX = GND or BATT -20 100 0 CONDITIONS MIN TYP 20 0.1 +20 MAX UNITS mA µA % % MHz Degrees
MAX1927/MAX1928
ELECTRICAL CHARACTERISTICS
(VBATT = 3.6V, SHDN = BATT, CREF = 0.1µF, TA = -40°C to +85°C, unless otherwise noted.)
PARAMETER BATT Input Voltage Undervoltage Lockout Threshold Quiescent Current Quiescent Current in Dropout Shutdown Supply Current REFERENCE AND ERROR AMP MAX1927R FB Voltage Accuracy MAX1928-15 MAX1928-18 MAX1928-25 FB Input Current MAX1928 0.732 1.47 1.764 2.45 5 0.768 1.53 1.836 2.55 15 µA V SHDN = GND VBATT rising or falling (35mV hysteresis) No load, pulse skipping, PWM = GND CONDITIONS MIN 2.6 2.15 MAX 5.5 2.55 240 340 10 UNITS V V µA µA µA
_______________________________________________________________________________________
3
Others parts begin by ma
|
|
|
