|
Details, datasheet, quote on part number:MXD1013UA090
| |
Datasheet text preview:
19-0394; Rev 0; 12/97
3-in-1 Silicon Delay Line
_______________General Description
The MXD1013 contains three independent, monolithic, l o g i c - b u f f e r e d delay lines with delays ranging from 10ns to 200ns. Nominal accuracy is ±2ns for a 10ns to 60ns delay, ±3% for a 70ns to 100ns delay, and ±5% for a 150ns to 200ns delay. Relative to hybrid solutions, these devices offer enhanced performance and higher reliability, and reduce overall cost. Each output can drive up to ten standard 74LS loads. The MXD1013 is available in multiple versions, each offering a different combination of delay times. It comes in the space-saving 8-pin µMAX package, as well as a standard 8-pin SO and DIP. It is also offered in indust r y - s t a n d a r d 16-pin SO and 14-pin DIP packaging, allowing full compatibility with the DS1013 and other delay-line products.
____________________________Features
o Improved Second Source to DS1013 o Available in Space-Saving 8-Pin µMAX Package o 20mA Supply Current (vs. Dallas' 40mA) o Low Cost o Three Separate Buffered Delays o Delay Tolerance of ±2ns for MXD1013_ _ 010 through MXD1013_ _ 060 o TTL/CMOS-Compatible Logic o Leading- and Trailing-Edge Accuracy o Custom Delays Available
MXD1013
________________________Applications
Clock Synchronization Digital Systems
______________Ordering Information
PART MXD1013C/D_ _ _ MXD1013PA_ _ _ MXD1013PD_ _ _ MXD1013SA_ _ _ MXD1013SE_ _ _ MXD1013UA_ _ _ TEMP. RANGE 0°C to +70°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C PIN-PACKAGE Dice* 8 Plastic DIP 14 Plastic DIP 8 SO 16 Narrow SO 8 µMAX
_________________Pin Configurations
TOP VIEW
IN1 IN2 IN3 1 2 8 7 VCC OUT1 OUT2 OUT3
*Dice are tested at TA = +25°C. Note: To complete the ordering information, fill in the blank with the part number extension from the Part Numbers and Delay Times table to indicate the desired delay per output.
MXD1013
3 6 5
___Part Numbers and Delay Times
PART NUMBER EXTENSION (MXD1013_ _ _ ) 010 012 OUTPUT DELAY (ns) 10 12 15 20 25 30 35 40 45 PART NUMBER EXTENSION (MXD1013_ _ _ ) 050 060 070 075 080 090 100 150 200 OUTPUT DELAY (ns) 50 60 70 75 80 90 100 150 200
GND 4
DIP/SO/µMAX
IN 1 N.C. IN2 2 3
14 VCC 13 N.C. 12 OUT1
015 020 025 030 035 040 045
N.C. 4 IN3 5 N.C. 6 GND 7
MXD1013
11 N.C. 10 OUT2 9 8 N.C. OUT3
DIP
Pin Configurations continued at end of data sheet.
Functional Diagram appears at end of data sheet.
________________________________________________________________ Maxim Integrated Products
1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800. For small orders, phone 408-737-7600 ext. 3468.
3-in-1 Silicon Delay Line MXD1013
ABSOLUTE MAXIMUM RATINGS
VCC to GND .....-0.5V to +6V All Other Pins....-0.5V to (VCC + 0.5V) Short-Circuit Output Current (1sec) ...50mA Continuous Power Dissipation (TA = +70°C) 8-Pin Plastic DIP (derate 9.1mW/°C above +70°C) .......727mW 14-Pin Plastic DIP (derate 10.0mW/°C above +70°C) ...800mW 8-Pin SO (derate 5.9mW/°C above +70°C)...........471mW 16-Pin Narrow SO (derate 8.7mW/°C above +70°C) .....696mW 8-Pin µMAX (derate 4.1mW/°C above +70°C) ......330mW Operating Temperature Range ...-40°C to +85°C Storage Temperature Range .....-65°C to +160°C Lead Temperature (soldering, 10sec) .....+300°C
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VCC = +5.0V ±5%, TA = -40°C to +85°C, unless otherwise noted. Typical values are at TA = +25°C.)(Note 1) PARAMETER Supply Voltage Input Voltage High Input Voltage Low Input Leakage Current Active Current Output Current High Output Current Low Input Capacitance SYMBOL VCC VIH VIL IL ICC IOH IOL CIN (Note 2) (Note 2) (Note 2) 0V VIN VCC VCC = 5.25V, period = minimum (Note 3) VCC = 4.75V, VOH = 4.0V VCC = 4.75V, VOL = 0.5V TA = +25°C (Note 4) 12 5 10 -1 20 CONDITIONS MIN 4.75 2.2 0.8 1 70 -1 TYP 5.00 MAX 5.25 UNITS V V V µA mA mA mA pF
TIMING CHARACTERISTICS
(VCC = +5.0V ±5%, TA = +25°C, unless otherwise noted.) PARAMETER Input Pulse Width Input-to-Output Delay (leading edge) Input-to-Output Delay (trailing edge) Power-Up Time Period Note 1: Note 2: Note 3: Note 4: Note 5: Note 6: SYMBOL tWI tPLH tPHL tPU (Note 5) 3(tWI) CONDITIONS (Note 5) (Notes 6, 7, 8) (Notes 6, 7, 8) MIN 100% of tPLH TYP MAX UNITS ns ns ns 100 ms ns
See Part Number and Delay Times table See Part Number and Delay Times table
Specifications to -40°C are guaranteed by design, not production tested. All voltages referenced to GND. Measured with outputs open. Guaranteed by design. Pulse width and/or period specifications may be exceeded, but accuracy is application sensitive (i.e., layout, decoupling, etc.). VCC = +5V at +25°C. Typical delays are accurate on both rising and falling edges within ±2ns for delays from 10ns to 60ns, within ±3% for delays from 70ns to 100ns, and within ±5% for delays from 150ns to 200ns. Note 7: The Part Number and Delay Times table provides typical delays at +25°C with VCC = +5V. The delays may shift with temperature and supply variations. The combination of temperature (from +25°C to 0°C, or +25°C to +70°C) and supply variation (from 5V to 4.75V, or 5V to 5.25V) could produce an additional typical delay of ±1.5ns or ±3%, whichever is greater. Note 8: All output delays tend to vary unidirectionally with temperature or supply voltage variations (i.e., if OUT1 slows down, all other outputs also slow down).
2
_______________________________________________________________________________________
3-in-1 Silicon Delay Line
__________________________________________Typical Operating Characteristics
(VCC = +5V, TA = +25°C, unless otherwise noted.)
MXD1013_ _100 PERCENT CHANGE IN DELAY vs. TEMPERATURE (OUT1)
MXD1013 TOC01
MXD1013
ACTIVE CURRENT vs. INPUT FREQUENCY
11.0 10.5 10.0 ACTIVE CURRENT (mA) 9.5 9.0 8.5 8.0 7.5 7.0 6.5 6.0 0.0001 0.001 0.01 0.1 1 10 100 INPUT FREQUENCY (MHz) MXD1013_ _075 MXD1013_ _030 ALL INPUTS CONNECTED TOGETHER 0V3V INPUT NO LOAD 2.0 1.5 % CHANGE IN DELAY 1.0 0.5 0 -0.5 -1.0 -1.5 -2.0 -40 tPHL tPLH
tPLH tPHL
-20
0
20
40
60
80
100
TEMPERATURE (°C)
MXD1013_ _100 PERCENT CHANGE IN DELAY vs. TEMPERATURE (OUT2)
MXD1013 TOC3
MXD1013_ _00 PERCENT CHANGE IN DELAY vs. TEMPERATURE (OUT3)
1.5 % CHANGE IN DELAY 1.0 0.5 0 -0.5 -1.0 -1.5 -2.0 tPLH tPHL tPLH tPHL tPLH tPHL
MXD1013 TOC4
2.0 1.5 % CHANGE IN DELAY 1.0 0.5 0 -0.5 -1.0 -1.5 -2.0 -40 -20 0 20 40 60 80 tPLH tPHL tPHL tPLH
2.0
100
-40
-20
0
20
40
60
80
100
TEMPERATURE (°C)
TEMPERATURE (°C)
_______________________________________________________________________________________
MXD1013 TOC2
3
|
|
