|
|
Part: SPC-0704P-121
Category:
Description: SMD Power Inductor
Company: Taipei Multipower Electronics
Datasheet: Download SPC-0704P-121 datasheet File size : 249 kB
Request For quote: Find where to buy SPC-0704P-121
Datasheet text preview:
SMD INDUCTORS
MODEL NO. FEATURES: : SMI-40 / SMI-50 SERIES
* SUPERIOR QUALITY FROM AN AUTOMATED PRODUCTION LINE. * PICK AND PLACE COMPATIBLE. * TAPE AND REEL PACKING.
APPLICATION :
* NOTEBOOK COMPUTERS. * SIGNAL CONDITIONING * HYBRIDS * DC-DC CONVERTORS. * CELLULAR TELEPHONES * PAGERS. *DC-AC INVERTERS. *FILTERING.
ELECTRICAL SPECIFICATION:
(U N I T : m m )
PHYSICAL DIMENSION :
SMI-40 SERIES
MODEL NO. SMI-40-1R0 SMI-40-1R5 SMI-40-2R2 SMI-40-3R3 SMI-40-4R7 SMI-40-6R8 SMI-40-100 SMI-40-120 SMI-40-150 SMI-40-180 SMI-40-220 SMI-40-270 SMI-40-330 SMI-40-390 SMI-40-470 SMI-40-560 SMI-40-680 SMI-40-820 SMI-40-101 SMI-40-121 SMI-40-151 SMI-40-181 SMI-40-221 SMI-40-271 SMI-40-331 SMI-40-471 SMI-40-681 SMI-40-821 SMI-40-102 L (uH) 1.0 1.5 2.2 3.3 4.7 6.8 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 470 680 820 1000 RATED DC DCR MAX CURREN T (OHMS) (mA) 0.04 500 0.06 450 0.07 400 0.10 300 0.15 250 0.17 220 0.24 200 0.30 180 0.36 160 0.41 160 0.55 130 0.64 130 0.75 100 0.83 100 1.10 100 1.50 80 1.60 80 2.10 70 2.40 70 3.20 50 4.50 45 5.10 40 6.00 40 6.80 40 8.00 40 14.0 40 18.0 40 24.0 40 27.0 40 L MODEL NO.
SMI-50 SERIES
DCR RATED DC MAX CURRENT (mA) (uH) (OHMS) 0.054 0.064 0.075 0.094 0.12 0.15 0.16 0.22 0.35 0.50 0.60 0.65 0.83 0.90 1.50 2.20 3.20 4.70 7.00 11.0 500 500 500 450 420 400 400 400 250 250 200 200 160 160 120 100 100 100 50 40
SMI-50-3R3 3.3 SMI-50-4R7 4.7 SMI-50-6R8 6.8 SMI-50-8R2 8.2 SMI-50-100 10 SMI-50-120 12 SMI-50-150 15 SMI-50-220 22 SMI-50-330 33 SMI-50-470 47 SMI-50-560 56 SMI-50-680 68 SMI-50-820 82 SMI-50-101 100 SMI-50-151 150 SMI-50-221 220 SMI-50-331 330 SMI-50-471 470 SMI-50-681 680 SMI-50-102 1000
SMI-40 SERIES
SMI-50 SERIES
A:6.9±0.3mm FOR 3.3uH~47uH B: 1.0±0.15mm A:6.3±0.3mm FOR 56uH~1000uH B: 0.87±0.15mm
NOTE(1):TEST FREQUENCY: 100KHz,1VRMS. NOTE(2):1.0uH~8.2uH ±20%, 10uH~1000uH ±10%.
PACKING
Tape and Reel Orientation
COVER TAPE CARRIER TAPE EMBOSSED CAVITY USER DIRECTION OF FEED LABEL AREA
MODEL NOTE : Top view shown with cover tape removed. SMI-40 SERIES SMI-50 SERIES
TAPE SPECIFICATIONS:
Carrier Tape Type: Conductive. Cover Tape Type: Antistatic. Cover Tape Adhesion to Carrier: 10 70 grams.
TYPE WIDTH 12 mm 16 mm
REEL WIDTH 18.4 mm 22.4 mm
COMPONENT UNITS PITCH PER REEL 8 mm 8mm 2500 1000
REEL SPECIFICATIONS: Non-antistatic.
Diameter (flange) : 13" (330.2mm)
STANDARDS : All embossed carrier tape packaging will be accomplished in compliance with latest revision of EIA-481
" Taping of surface Mount Components for Automatic Placement" .
ENVIRONMENTAL PERFORMANCE
ITEM
1 2
TEST
Thermal Shock Vibration
Ten cycles of
CONDITION
30 minutes @ -55°C,15seconds maximum @room ambient, 30 minutes @ + 125°C, 15 seconds maximum @ room ambient. 1 cycle of 30 minutes duration per the following: 5-7 Hz constant displacement of .75 inch, 5 minutes, 7-30 Hz constant acceleration of 1.5 g's. 10 minutes, 30-50 Hz constant displacement of 0.033 inch, 5 minutes, 50-500 Hz constant acceleration of 4.2 g's, 10 minutes. Per MIL-STD-202, Method 208, except steam aging is omitted and pads are dipped 30 from vertical. Solder temperature: + 245°C ±5°C. Immersion dwell time: 5±1/2 seconds. Subject the component to 168 hours at + 85°C and 85% relative humidity. Precondition at + 40°C for 60 minutes. Subject the component to 240 hours at + 40°C and 90 to 95% relative humidity. One-half sine pulse (8700 g's for 0.3 milliseconds) in each direction along 3 mutually perpendicular axes in each direction (total of 6 shocks).
3
Solderability
4 5 6
Storage Life Moisture Resistance Mechanical Shock
SMD POWER INDUCTORS
MODEL NO. FEATURES: : SMI-42 SERIES (DO1608C COMPATIBLE)
* SUPERIOR QUALITY FROM AN AUTOMATED PRODUCTION LINE. * PICK AND PLACE COMPATIBLE. * TAPE AND REEL PACKING.
APPLICATION :
* NOTEBOOK COMPUTERS. * DIGITAL STILL CAMERAS. * ELECTRONICS DICTIONARIES *DC-AC INVERTERS. *CABLE MODEM
ELECTRICAL SPECIFICATION:
(UNIT:mm)
PHYSICAL DIMENSION :
PART
NO.
INDUCTANCE (H20%) 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000
D.C.R. MAX () 0.05 0.05 0.07 0.08 0.09 0.13 0.16 0.23 0.37 0.51 0.64 0.86 1.27 2.00 2.65 3.80 5.06 9.20 13.8
Isat (ADC) 2.90 2.60 2.30 2.00 1.50 1.20 1.10 0.90 0.70 0.58 0.50 0.40 0.31 0.27 0.22 0.18 0.16 0.14 0.10
Irms (Arms) 2.9 2.8 2.4 2.0 1.5 1.4 1.1 1.2 0.8 0.6 0.5 0.4 0.3 0.25 0.2 0.16 0.15 0.12 0.07
SMI-42-1R0 SMI-42-1R5 SMI-42-2R2 SMI-42-3R3 SMI-42-4R7 SMI-42-6R8 SMI-42-100 SMI-42-150 SMI-42-220 SMI-42-330 SMI-42-470 SMI-42-680 SMI-42-101 SMI-42-151 SMI-42-221 SMI-42-331 SMI-42-471 SMI-42-681 SMI-42-102
NOTE(1):TEST FREQUENCY: 100KHZ,0.1VRMS. NOTE(2):THIS INDICATES THE VALUE OF CURRENT WHEN THE INDUCTANCE IS 10% LOWER THAN ITS INITIAL VALUE AT D.C. CURRENT WHEN ATT=40WHICHEVER IS LOWER.
Others parts begin by sp
SP-1 SP-2 SP-3 SP-4 SP-5 SP-6 SP-7 SP-8 SP-9 SP-10 SP-11 SP-12 SP-13 SP-14 SP-15 SP-16 SP-17 SP-18 SP-19 SP-20 SP-21 SP-22 SP-23 SP-24 SP-25 SP-26 SP-27 SP-28 SP-29 SP-30 SP-31 SP-32
|
|
|
