|
Details, datasheet, quote on part number:PIC16F88
| |
| Part: | PIC16F88 |
| Category: | Microcontrollers => PICmicro with analog capability |
| Description: | This Powerful (200 Nanosecond Instruction Execution) Yet Easy–to-program (only 35 Single Word Instructions) CMOS Flash-based 8-bit Microcontroller Packs Microchip’s Powerful Pic Architecture Into an 18-pin Package And is Upwards Compatible With The PIC16C7x, PIC16C62xA, PIC16C5X And PIC12CXXX Devices |
| Company: | Microchip Technology, Inc. |
| Datasheet: | Download PIC16F88 datasheet File size : 4318 kB |
| Request For quote: | Find where to buy PIC16F88
|
| |
Datasheet text preview:
PIC16F87/88 Data Sheet
18/20-Pin Enhanced FLASH Microcontrollers with nanoWatt Technology
2002 Microchip Technology Inc.
Advance Information
DS30487A
Note the following details of the code protection feature on Microchip devices: · · · Microchip products meet the specification contained in their particular Microchip Data Sheet. Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip's Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. Microchip is willing to work with the customer who is concerned about the integrity of their code. Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as "unbreakable."
· ·
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products.
Information contained in this publication regarding device applications and the like is intended through suggestion only and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. No representation or warranty is given and no liability is assumed by Microchip Technology Incorporated with respect to the accuracy or use of such information, or infringement of patents or other intellectual property rights arising from such use or otherwise. Use of Microchip's products as critical components in life support systems is not authorized except with express written approval by Microchip. No licenses are conveyed, implicitly or otherwise, under any intellectual property rights.
Trademarks The Microchip name and logo, the Microchip logo, KEELOQ, MPLAB, PIC, PICmicro, PICSTART and PRO MATE are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. FilterLab, microID, MXDEV, MXLAB, PICMASTER, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A. dsPIC, dsPICDEM.net, ECONOMONITOR, FanSense, FlexROM, fuzzyLAB, In-Circuit Serial Programming, ICSP, ICEPIC, microPort, Migratable Memory, MPASM, MPLIB, MPLINK, MPSIM, PICC, PICDEM, PICDEM.net, rfPIC, Select Mode and Total Endurance are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. Serialized Quick Turn Programming (SQTP) is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. © 2002, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved.
Printed on recycled paper.
Microchip received QS-9000 quality system certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona in July 1999 and Mountain View, California in March 2002. The Company's quality system processes and procedures are QS-9000 compliant for its PICmicro® 8-bit MCUs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, non-volatile memory and analog products. In addition, Microchip's quality system for the design and manufacture of development systems is ISO 9001 certified.
DS30487A - page ii
Advance Information
2002 Microchip Technology Inc.
PIC16F87/88
18/20-Pin Enhanced FLASH MCUs with nanoWatt Technology
Low Power Features:
· Power Managed modes: - Primary RUN XT, RC oscillator, 87 µA, 1 MHz, 2V - RC_RUN 7 µA, 31.25 kHz, 2V - SEC_RUN 14 µA, 32 kHz, 2V - SLEEP 0.2 µA, 2V · Timer1 oscillator 1.3 µA, 32 kHz, 2V · Watchdog Timer 0.7 µA, 2V · Two-Speed Oscillator Start-up
Pin Diagram
18-Pin DIP, SOIC
RA2/AN2/CVREF/ VREFRA3/AN3/VREF+/ C1OUT RA4/AN4/T0CKI/ C2OUT RA5/MCLR/VPP VSS RB0/INT/CCP1(1) RB1/SDI/SDA RB2/SDO/RX/DT RB3/PGM/CCP1 Note 1:
(1)
1 2 3
18 17 16
RA1/AN1 RA0/AN0 RA7/OSC1/CLKI RA6/OSC2/CLKO VD D RB7/AN6/PGD/ T1OSI RB6/AN5/PGC/ T1OSO/T1CKI RB5/SS/TX/CK RB4/SCK/SCL
5 6 7 8 9
PIC16F88
4
15 14 13 12 11 10
Oscillators:
· Three Crystal modes: - LP, XT, HS up to 20 MHz · Two External RC modes · One External Clock mode: - ECIO up to 20 MHz · Internal oscillator block: - 8 user selectable frequencies: 31 kHz, 125 kHz, 250 kHz, 500 kHz, 1 MHz, 2 MHz, 4 MHz, 8 MHz
The CCP1 pin is determined by CCPMX in Configuration Word1 register.
Special Microcontroller Features:
· 100,000 erase/write cycles Enhanced FLASH program memory typical · 1,000,000 typical erase/write cycles EEPROM data memory typical · EEPROM Data Retention: > 40 years · In-Circuit Serial ProgrammingTM (ICSPTM) via two pins · Processor read/write access to program memory · Low Voltage Programming · In-Circuit Debugging via two pins · Extended Watchdog Timer (WDT): - Programmable period from 1 ms to 268s · Wide operating voltage range: 2.0V to 5.5V
Peripheral Features:
· Capture, Compare, PWM (CCP) module: - Capture is 16-bit, max. resolution is 12.5 ns - Compare is 16-bit, max. resolution is 200 ns - PWM max. resolution is 10-bit · 10-bit, 7-channel Analog-to-Digital Converter · Synchronous Serial Port (SSP) with SPITM (Master/Slave) and I2CTM (Slave) · Universal Synchronous Asynchronous Receiver Transmitter (USART/SCI) with 9-bit address detection: - RS-232 operation using internal oscillator (no external crystal required) · Dual Analog Comparator module: - Programmable on-chip voltage reference - Programmable input multiplexing from device inputs and internal voltage reference - Comparator outputs are externally accessible
Program Memory Device PIC16F87 PIC16F88 FLASH # Single Word (bytes) Instructions 7168 7168 4096 4096 Data Memory SRAM (bytes) 368 368 EEPROM (bytes) 256 256
I/O Pins 16 16
10-bit CCP A/D (ch) (PWM) 0 1 1 1
USART Y Y
Comparators 2 2
SSP Y Y
Timers 8/16-bit 2/1 2/1
2002 Microchip Technology Inc.
Advance Information
DS 30487A - page 1
|
|
