|
Details, datasheet, quote on part number:PIC16F916-I/ML
| |
| Part: | PIC16F916-I/ML |
| Category: | Microcontrollers => 8 bit |
| Description: | Flash-Based, 8-Bit CMOS Microcontrollers with nanoWatt Technology
Only 35 instructions to learn:
- All single-cycle instructions except branches
Operating speed:
- DC 20 MHz oscillator/clock input
- DC 200 ns instruction cycle
Program Memory Read (PMR) capability
Interrupt capability
8-level deep hardware stack
Direct, Indirect and Relative Addressing modes
Special Microcontroller Features:
Precision Internal Oscillator:
- Factory calibrated to ±1%
- Software selectable frequency range of
8 MHz to 32 kHz
- Software tunable
- Two-Speed Start-up mode
- Crystal fail detect for critical applications
- Clock mode switching during operation for
power savings
Power-saving Sleep mode
Wide operating voltage range (2.0V-5.5V)
Industrial and Extended temperature range
Power-on Reset (POR)
Power-up Timer (PWRT) and Oscillator Start-up
Timer (OST)
Brown-out Reset (BOR) with software control
option
Enhanced Low-Current Watchdog Timer (WDT)
with on-chip oscillator (software selectable
nominal 268 seconds with full prescaler) with
software enable
Multiplexed Master Clear with pull-up/input pin
Programmable code protection
High-Endurance Flash/EEPROM cell:
- 100,000 write Flash endurance
- 1,000,000 write EEPROM endurance
- Flash/Data EEPROM retention: > 40 years
Low-Power Features:
Standby Current:
- 1 nA @ 2.0V, typical
Operating Current:
- 8.5΅A @ 32 kHz, 2.0V, typical
- 100΅A @ 1 MHz, 2.0V, typical
Watchdog Timer Current:
- 1΅A @ 2.0V, typical
Peripheral Features:
Liquid Crystal Display module:
- Up to 60 pixel drive capability on 28-pin
devices
- Up to 96 pixel drive capability on 40-pin
devices
- Four commons
Up to 35 I/O pins and 1 input-only pin:
- High-current source/sink for direct LED drive
- Interrupt-on-pin change
- Individually programmable weak pull-ups
In-Circuit Serial Programming (ICSP) via two
pins
Analog comparator module with:
- Two analog comparators
- Programmable on-chip voltage reference
(CVREF) module (% of VDD)
- Comparator inputs and outputs externally
accessible
A/D Converter:
- 10-bit resolution and up to 8 channels
Timer0: 8-bit timer/counter with 8-bit
programmable prescaler
Enhanced Timer1:
- 16-bit timer/counter with prescaler
- External Gate Input mode
- Option to use OSC1 and OSC2 as Timer1
oscillator if INTOSCIO or LP mode is
selected
Timer2: 8-bit timer/counter with 8-bit period
register, prescaler and postscaler
Addressable Universal Synchronous
Asynchronous Receiver Transmitter (AUSART)
Up to 2 Capture, Compare, PWM modules:
- 16-bit Capture, max. resolution 12.5 ns
- 16-bit Compare, max. resolution 200 ns
- 10-bit PWM, max. frequency 20 kHz
Synchronous Serial Port (SSP) with I2C |
| Company: | Microchip Technology, Inc. |
| Datasheet: | Download PIC16F916-I/ML datasheet File size : 5078 kB |
| Request For quote: | Find where to buy PIC16F916-I/ML
|
|
