Details, datasheet, quote on part number: PIC18LC858-I/PT
PartPIC18LC858-I/PT
CategoryInterface and Interconnect => CAN (Control Area Network)
DescriptionHigh-performance Microcontrollers With CAN Module
CompanyMicrochip Technology, Inc.
DatasheetDownload PIC18LC858-I/PT datasheet
Quote
Find where to buy
 
  

 

Features, Applications

C-compiler optimized architecture instruction set Linear program memory addressing to 32 Kbytes Linear data memory addressing to 4 Kbytes

Program Memory On-Chip Device EPROM (bytes) Off-Chip On-Chip RAM (bytes)

10-bit Analog-to-Digital Converter module (A/D) with: - Fast sampling rate - Conversion available during SLEEP - DNL = 1 LSb, INL = 1 LSb to 16 channels available Analog Comparator Module: - 2 Comparators - Programmable input and output multiplexing Comparator Voltage Reference Module Programmable Low Voltage Detection (LVD) module - Supports interrupt on low voltage detection Programmable Brown-out Reset (BOR)

# Single Maximum Word Addressing Instructions (bytes)

to 10 MIPS operation: - 40 MHz clock input - 4 MHz - 10 MHz osc./clock input with PLL active 16-bit wide instructions, 8-bit wide data path Priority levels for interrupts x 8 Single Cycle Hardware Multiplier

Message bit rates to 1 Mbps Conforms to CAN 2.0B ACTIVE Spec with: - 29-bit Identifier Fields - 8 byte message length 3 Transmit Message Buffers with prioritization 2 Receive Message Buffers 6 full 29-bit Acceptance Filters Prioritization of Acceptance Filters Multiple Receive Buffers for High Priority Messages to prevent loss due to overflow Advanced Error Management Features

High current sink/source to 76 I/O with individual direction control Four external interrupt pins Timer0 module: 8-bit/16-bit timer/counter with 8-bit programmable prescaler Timer1 module: 16-bit timer/counter Timer2 module: 8-bit timer/counter with 8-bit period register (time base for PWM) Timer3 module: 16-bit timer/counter Secondary oscillator clock option - Timer1/Timer3 Two Capture/Compare/PWM (CCP) modules CCP pins can be configured as: - Capture input: 16-bit, max resolution ns - Compare is 16-bit, max resolution 100 ns (TCY) - PWM output: PWM resolution to 10-bit. Max. PWM freq. @:8-bit resolution = 156 kHz 10-bit resolution = 39 kHz Master Synchronous Serial Port (MSSP) with two modes of operation: - 3-wire SPITM (Supports all 4 SPI modes) - I2CTM Master and Slave mode Addressable USART module: Supports Interrupt on Address bit

Power-on Reset (POR), Power-up Timer (PWRT), and Oscillator Start-up Timer (OST) Watchdog Timer (WDT) with its own on-chip RC oscillator Programmable code protection Power saving SLEEP mode Selectable oscillator options, including: - 4X Phase Lock Loop (of primary oscillator) - Secondary Oscillator (32 kHz) clock input In-Circuit Serial Programming (ICSPTM) via two pins

Low power, high speed EPROM technology Fully static design Wide operating voltage range to 5.5V) Industrial and Extended temperature ranges Low power consumption



 

Related products with the same datasheet
PIC18LC658-E/CL
PIC18LC658-E/L
PIC18LC658-E/PT
PIC18LC658-I/CL
PIC18LC658-I/L
PIC18LC658-I/PT
PIC18LC658T
PIC18LC658T-E/CL
PIC18LC658T-E/L
PIC18LC658T-E/PT
PIC18LC658T-I/CL
PIC18LC658T-I/L
Some Part number from the same manufacture Microchip Technology, Inc.
PIC18LC858T High-performance Microcontrollers With CAN Module
PIC18LF010 High Performance Microcontrollers
PIC18LF2220 28/40/44-pin High-performance, Enhanced Flash Microcontrollers With 10-bit A/D And Nanowatt Technology
PIC18LF2331 CMOS Flash-based 8-bit Microcontroller <<<>>>10 Mips (100 Nanosecond Instruction Execution) Yet Easy-to-program (only 77 Single Word Instructions) CMOS Flash-based 8-bit Microcontroller Packs Microchip's
PIC18LF2480/2580 Enhanced Flash Microcontrollers With Ecan Technology, 10-Bit A/D And Nanowatt Technology<<<>>>this Family of Devices Offers The Advantages of All<<<>>>PIC18 Microcontrollers Namely, High Computational<<<>>>performance
PIC18LF4220 28/40/44-pin High-performance, Enhanced Flash Microcontrollers With 10-bit A/D And Nanowatt Technology
PIC18LF4331 CMOS Flash-based 8-bit Microcontroller <<<>>>10 Mips (100 Nanosecond Instruction Execution) Yet Easy-to-program (only 77 Single Word Instructions) CMOS Flash-based 8-bit Microcontroller Packs Microchip's
PIC18LF4480/4580 Enhanced Flash Microcontrollers With Ecan Technology, 10-Bit A/D And Nanowatt Technology<<<>>>this Family of Devices Offers The Advantages of All<<<>>>PIC18 Microcontrollers Namely, High Computational<<<>>>performance
PIC18LF452-I/P High Performance, Enhancedflash Microcontrollers With 10-bit A/D
PIC30F3013-30I/SO High-performance Digital Signal Controllers<<<>>>devices Contain Extensive Digital Signal Processor<<<>>>(DSP) Functionality Within a High Performance 16-bit<<<>>>microcontroller (MCU) Architecture.
PS052 Powercal 2 Calibration Platform<<<>>>hardware Platform For Configuration, Calibration<<<>>>and Test of Microchip Battery Management<<<>>>products<<<>>> Operates Under Control of Windows Based<<<>>>powermate
PS401
PS402
PS700 Battery Monitor<<<>>>battery Monitor The PS700 is a Complete Analog Front-end For Battery Monitoring as Well as Digital Logic For Control, Measurement Accumulation, Timing, And Communications. What is Currently
rfHCS362F The RfHCS362G is a Code Hopping Encoder Designed For Secure Remote Keyless Entry (RKE) Systems Combined With a 310MHz - 480MHz Ask/fsk Transmitter
rfPIC12C509AF The RfPIC12C509AF Packs Microchip's Powerful PICmicro® Microcontroller Architecture Into an 18-pin Package Combined With a 310MHz - 480MHz FSK And Ask Transmitter
rfPIC12F675F The RfPIC12F675 Devices Pack Microchip's Powerful Yet Easy-to-program PICmicro® Microcontroller Architecture And a 434 MHZ Ask/fsk RF Transmitter Into a 20-pin Package
rfRXD0420 The RfRXD0420 Device is a Single Conversion Superheterodyne Receiver That Supports Both Ask And FSK Modulation Formats Within a Frequency Range of 300 to 450 MHZ
SCS152 Token Card Chip
SCS152-I/S Keeloq Token Card Chip
SCS152-I/W
 
0-C     D-L     M-R     S-Z