Details, datasheet, quote on part number: PIC18LF4480/4580
CategoryMicrocontrollers => 16 bit
DescriptionEnhanced Flash Microcontrollers With Ecan Technology, 10-Bit A/D And Nanowatt Technology<<<>>>this Family of Devices Offers The Advantages of All<<<>>>PIC18 Microcontrollers Namely, High Computational<<<>>>performance at an Economical Price With The Addition<<<>>>of High-endurance, Enhanced Flash Program<<<>>>memory. In Addition to These Features, The<<<>>>PIC18F2480/2580/4480/4580 Family Introduces Design<<<>>>enhancements That Make These Microcontrollers A<<<>>>logical Choice For Many High-performance, Power<<<>>>sensitive Applications.
CompanyMicrochip Technology, Inc.
DatasheetDownload PIC18LF4480/4580 datasheet


Features, Applications

28/40/44-Pin Enhanced Flash Microcontrollers with ECANTM Technology, 10-Bit A/D and nanoWatt Technology

Note the following details of the code protection feature on Microchip devices: Microchip products meet the specification contained in their particular Microchip Data Sheet. Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip's Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. Microchip is willing to work with the customer who is concerned about the integrity of their code. Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as "unbreakable."

Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip's code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Information contained in this publication regarding device applications and the like is intended through suggestion only and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. No representation or warranty is given and no liability is assumed by Microchip Technology Incorporated with respect to the accuracy or use of such information, or infringement of patents or other intellectual property rights arising from such use or otherwise. Use of Microchip's products as critical components in life support systems is not authorized except with express written approval by Microchip. No licenses are conveyed, implicitly or otherwise, under any intellectual property rights.

Trademarks The Microchip name and logo, the Microchip logo, Accuron, dsPIC, KEELOQ, microID, MPLAB, PIC, PICmicro, PICSTART, PRO MATE, PowerSmart, rfPIC, and SmartShunt are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. AmpLab, FilterLab, MXDEV, MXLAB, PICMASTER, SEEVAL, SmartSensor and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A. Analog-for-the-Digital Age, Application Maestro, dsPICDEM,, dsPICworks, ECAN, ECONOMONITOR, FanSense, FlexROM, fuzzyLAB, In-Circuit Serial Programming, ICSP, ICEPIC, Migratable Memory, MPASM, MPLIB, MPLINK, MPSIM, PICkit, PICDEM,, PICLAB, PICtail, PowerCal, PowerInfo, PowerMate, PowerTool, rfLAB, rfPICDEM, Select Mode, Smart Serial, SmartTel and Total Endurance are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. © 2004, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper.

Microchip received ISO/TS-16949:2002 quality system certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona and Mountain View, California in October 2003. The Company's quality system processes and procedures are for its PICmicro® 8-bit MCUs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip's quality system for the design and manufacture of development systems is ISO 9001:2000 certified.

Run: CPU on, peripherals on Idle: CPU off, peripherals on Sleep: CPU off, peripherals off Idle mode currents down 5.8 µA typical Sleep mode current down 0.1 µA typical Timer1 Oscillator: 1.1 µA, 32 kHz, 2V Watchdog Timer: 2.1 µA Two-Speed Oscillator Start-up

High current sink/source mA/25 mA Three external interrupts One Capture/Compare/PWM (CCP) module Enhanced Capture/Compare/PWM (ECCP) module (40/44-pin devices only): - One, two or four PWM outputs - Selectable polarity - Programmable dead time - Auto-Shutdown and Auto-Restart Master Synchronous Serial Port (MSSP) module supporting 3-wire SPITM (all 4 modes) and I2CTM Master and Slave modes Enhanced Addressable USART module - Supports RS-485, RS-232 and LIN - RS-232 operation using internal oscillator block (no external crystal required) - Auto-Wake-up on Start bit - Auto-Baud detect to 11-channel Analog-to-Digital Converter module (A/D), to 100 Ksps - Auto-acquisition capability - Conversion available during Sleep Dual analog comparators with input multiplexing

Four Crystal modes, to 40 MHz 4X Phase Lock Loop (PLL) ­ available for crystal and internal oscillators) Two External RC modes, to 4 MHz Two External Clock modes, to 40 MHz Internal oscillator block: - 8 user selectable frequencies, from 31 kHz to 8 MHz - Provides a complete range of clock speeds, from 31 kHz to 32 MHz when used with PLL - User tunable to compensate for frequency drift Secondary oscillator using @ 32 kHz Fail-Safe Clock Monitor - Allows for safe shutdown if peripheral clock stops

C compiler optimized architecture with optional extended instruction set 100,000 erase/write cycle Enhanced Flash program memory typical 1,000,000 erase/write cycle Data EEPROM memory typical Flash/Data EEPROM Retention: > 40 years Self-programmable under software control Priority levels for interrupts x 8 Single Cycle Hardware Multiplier Extended Watchdog Timer (WDT): - Programmable period from to 131s Single-Supply 5V In-Circuit Serial ProgrammingTM (ICSPTM) via two pins In-Circuit Debug (ICD) via two pins Wide operating voltage range: to 5.5V

Message bit rates to 1 Mbps Conforms to CAN 2.0B ACTIVE Specification Fully backward compatible with PIC18XXX8 CAN modules Three modes of operation: - Legacy, Enhanced Legacy, FIFO Three dedicated transmit buffers with prioritization Two dedicated receive buffers Six programmable receive/transmit buffers Three full 29-bit acceptance masks 16 full 29-bit acceptance filters w/ dynamic association DeviceNetTM data byte filter support Automatic remote frame handling Advanced error management features


Related products with the same datasheet
Some Part number from the same manufacture Microchip Technology, Inc.
PIC18LF4480/4580T Enhanced Flash Microcontrollers With Ecan Technology, 10-Bit A/D And Nanowatt Technology<<<>>>this Family of Devices Offers The Advantages of All<<<>>>PIC18 Microcontrollers Namely, High Computational<<<>>>performance
PIC18LF452-I/P High Performance, Enhancedflash Microcontrollers With 10-bit A/D
PIC30F3013-30I/SO High-performance Digital Signal Controllers<<<>>>devices Contain Extensive Digital Signal Processor<<<>>>(DSP) Functionality Within a High Performance 16-bit<<<>>>microcontroller (MCU) Architecture.
PS052 Powercal 2 Calibration Platform<<<>>>hardware Platform For Configuration, Calibration<<<>>>and Test of Microchip Battery Management<<<>>>products<<<>>> Operates Under Control of Windows Based<<<>>>powermate
PS700 Battery Monitor<<<>>>battery Monitor The PS700 is a Complete Analog Front-end For Battery Monitoring as Well as Digital Logic For Control, Measurement Accumulation, Timing, And Communications. What is Currently
rfHCS362F The RfHCS362G is a Code Hopping Encoder Designed For Secure Remote Keyless Entry (RKE) Systems Combined With a 310MHz - 480MHz Ask/fsk Transmitter
rfPIC12C509AF The RfPIC12C509AF Packs Microchip's Powerful PICmicro® Microcontroller Architecture Into an 18-pin Package Combined With a 310MHz - 480MHz FSK And Ask Transmitter
rfPIC12F675F The RfPIC12F675 Devices Pack Microchip's Powerful Yet Easy-to-program PICmicro® Microcontroller Architecture And a 434 MHZ Ask/fsk RF Transmitter Into a 20-pin Package
rfRXD0420 The RfRXD0420 Device is a Single Conversion Superheterodyne Receiver That Supports Both Ask And FSK Modulation Formats Within a Frequency Range of 300 to 450 MHZ
SCS152 Token Card Chip
SCS152-I/S Keeloq Token Card Chip
ST93C56B1013TR 2k ( 128 X 16 or 256 X 8 ) Serial Microwire EePROM
TC07 The TC07 is a Programmable, Logic Output Temperature Detector That Operates From Power Supply Levels as Low as 2
TC1014 The TC1014, TC1015, And TC1185 Are High Accuracy (typically ±0

PIC16CE623T-04/JW : PICmicro with analog capability This Powerful (133 Nanosecond Instruction Execution) Yet Easy-to-program (only 35 Single Word Instructions) CMOS Otp-based 8-bit Microcontroller Packs Microchip's Powerful Pic Architecture Into an 18-pin Package And is Upwards Compatible With The PIC16C5X And PIC12CXXX Devices

PIC17CR43-25I/JW : High-performance 8-bit CMOS EPROM/rom Microcontroller

TC54VN4101ECTTR : The TC54 Series Are CMOS Voltage Detectors, Suited Especially For Battery-powered Applications Because of TheIR Extremely Low 1uA Operating Current And Small Surface-mount Packaging

24LC02B-E/MS : 24AA01/24LC01B Data Sheet The Microchip Technology Inc. 24AA01/24LC01B (24XX01*) is a 1 Kbit Electrically Erasable PROM. The device is organized as one block of 128 x 8-bit memory with a 2-wire serial interface. Low-voltage design permits operation down to 1.7V with standby and active currents of o

MCP4018 : -Bit Single I2C Digital POT With Volatile Memory In SC-70 The MCP4017/8/9 devices offer a wide range of product offerings using an I2C™Compatible interface. This family of devices support a 7-bit resistor network, volatile memory configuration, and potentiometer and rheostat pinouts. This device fa

PIC12F636-E/MDQTP : 8-pin Flash-based, 8-bit CMOS Microcontrollers with Nanowatt Technology

24AA04-I/MS : 4K I2c˘â Serial Eeprom

MCP6241T-E/MS : 50 uA, 550 kHz Rail-to-rail Op Amp

TC4428AVMF : 1.5A Dual High-speed Power Mosfet Drivers

93C56C : 2K Microwire Compatible Serial Eeprom

93LC76CT-E/CH : 8k/16k 2.5V Microwire Serial Eeprom

PIC16F87XA-I/PT : 14-pin Flash-based, 8-bit CMOS Microcontrollers with Nanowatt Technology

0-C     D-L     M-R     S-Z